Repair Building 1956 and Replace HVAC

Step 2 Bid Opening will held on 13 March 2023 at 10:30 AM CT. Please utlize the link below to access the Bid Opening. 

https://usace1.webex.com/usace1/j.php?MTID=mdf8ef850f49cbc1cd5523007d5afd325 

--------------------------------------------------------------------------------------------------------------

The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

10 February 2023

Bidders Invited to Participate in Step 2 are: 

-CCI Energy and Construction, LLC

-Sergent Mechanical Systems, Inc

-SES Electrical

---------------------------------------------------------------------------------------------------------------------

The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank. *Visit 'https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?solNo=W912BV23B0001' to obtain more details.*

10/19/2022

The site visit to review the ‘Repair Building 1956 and Replace HVAC’ project has been scheduled for Tuesday, 1 NOV 2022 from 0900-1100 CDT. Offerors must submit in writing, via e-mail, the firm’s name, address, point of contact, telephone number, and  number of personnel planning to attend to Ms. Lindsey Byfield (lindsey.m.byfield@usace.army.mil) no later than five (5) working days prior to the site visit.  A Government issued ID (i.e., driver’s license) is required to gain access to the installation. Each attendee who needs a Visitor Pass will need to provide their name, date of birth, and a valid driver's license or state ID number with state of issue. USACE will need to submit an entry access list to the Sheppard AFB Visitor Center before the visit for prior approval.

Offerors are reminded to allow sufficient time to pass through security to gain entrance to the installation. 

The proposal due date has been extended to Tuesday, 8 NOV 2022 at 2:00PM CDT. An amendment will be published to update the revised due date, site visit information, and other changes to the solicitation as soon as possible. 

_______________________________________________________________________________________________

10/18/2022

The site visit previously scheduled for 19 October 2022 at 1:00PM CDT has been cancelled. The new site visit date and time is to be determined. The proposal closing date will be extended accordingly. Further information will be issued by amendment.

_________________________________________________________________________________________________

10/13/2022

A site visit has been scheduled for 19 October 2022 at 1:00 PM CDT. Further details to come.  

_________________________________________________________________________________________________

The U.S. Army Corps of Engineers (USACE) Tulsa District hereby issues the Step-One IFB of a Total Small Business Set-Aside Two-Step Invitation for Bid (IFB) that will result in one (1) Firm Fixed-Price contract for the Repair Building 1956 and Replace HVAC at Sheppard Air Force Base, Texas.

The North American Industry Classification System (NAICS) Code is 236220 (Commercial and Institutional Building Construction).

Estimated Magnitude of Construction:  Between $10,000,000 and $25,000,000

PROJECT SCOPE:  The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

TWO-STEP PROCUREMENT: This solicitation and resulting contract are using a Two-Step Sealed Bidding procurement method as described in FAR Part 14.5.

The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid.  The process allows for the Step One technical proposal submission and evaluation to be performed concurrent with the development of the final 100% technical specifications and construction drawings. Step One ensures that only technically acceptable firms participate in the Step Two sealed bid process.  

The Step One solicitation, issued as a Request for Technical Proposal, is issued here.

The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information.  Bid bonds / guarantees are not required to be submitted with the Step One technical proposal. 

Under this bidding process, Step One consists of the request for submission, evaluation and (if necessary) discussion of a technical proposal. Only one (1) technical proposal may be submitted by each offeror. The proposals will be evaluated for technical acceptability. Again, the technical proposal must not include prices or pricing information.

A notice of “acceptable” or “unacceptable” will be forwarded to each Step One offeror upon completion of the technical proposal evaluation and final determination.  The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s https://sam.gov/ website for the benefit of prospective subcontractors.

In Step Two, an amendment to the solicitation will be issued along with the final 100% technical specifications and construction drawings to only those offerors whose technical proposals are determined to be acceptable in Step One.  The normal sealed bidding process in FAR Part 14 will be followed in Step Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step One, will be considered for award. Each bid in Step Two must be based on the bidder's own technical proposal that was submitted, evaluated, and determined to be acceptable in Step One.  Bidders must comply with the 100% technical specifications and construction drawings and the bidder’s acceptable technical proposal.

Bid bonds will be required to be submitted with the Step Two bid submission.

Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued.

A site visit will be scheduled via Amendment. 

Interested contractors must have an active System for Award Management (SAM) registration. Firms can register via the SAM website at https://sam.gov/.  

10/18/2022

The site visit previously scheduled for 19 October 2022 at 1:00PM CDT has been cancelled. The new site visit date and time is to be determined. The proposal closing date will be extended accordingly. Further information will be issued by amendment.

_________________________________________________________________________________________________

10/13/2022

A site visit has been scheduled for 19 October 2022 at 1:00 PM CDT. Further details to come.  

_________________________________________________________________________________________________

The U.S. Army Corps of Engineers (USACE) Tulsa District hereby issues the Step-One IFB of a Total Small Business Set-Aside Two-Step Invitation for Bid (IFB) that will result in one (1) Firm Fixed-Price contract for the Repair Building 1956 and Replace HVAC at Sheppard Air Force Base, Texas.

The North American Industry Classification System (NAICS) Code is 236220 (Commercial and Institutional Building Construction).

Estimated Magnitude of Construction:  Between $10,000,000 and $25,000,000

PROJECT SCOPE:  The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

TWO-STEP PROCUREMENT: This solicitation and resulting contract are using a Two-Step Sealed Bidding procurement method as described in FAR Part 14.5.

The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid.  The process allows for the Step One technical proposal submission and evaluation to be performed concurrent with the development of the final 100% technical specifications and construction drawings. Step One ensures that only technically acceptable firms participate in the Step Two sealed bid process.  

The Step One solicitation, issued as a Request for Technical Proposal, is issued here.

The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information.  Bid bonds / guarantees are not required to be submitted with the Step One technical proposal. 

Under this bidding process, Step One consists of the request for submission, evaluation and (if necessary) discussion of a technical proposal. Only one (1) technical proposal may be submitted by each offeror. The proposals will be evaluated for technical acceptability. Again, the technical proposal must not include prices or pricing information.

A notice of “acceptable” or “unacceptable” will be forwarded to each Step One offeror upon completion of the technical proposal evaluation and final determination.  The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s https://sam.gov/ website for the benefit of prospective subcontractors.

In Step Two, an amendment to the solicitation will be issued along with the final 100% technical specifications and construction drawings to only those offerors whose technical proposals are determined to be acceptable in Step One.  The normal sealed bidding process in FAR Part 14 will be followed in Step Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step One, will be considered for award. Each bid in Step Two must be based on the bidder's own technical proposal that was submitted, evaluated, and determined to be acceptable in Step One.  Bidders must comply with the 100% technical specifications and construction drawings and the bidder’s acceptable technical proposal.

Bid bonds will be required to be submitted with the Step Two bid submission.

Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued.

A site visit will be scheduled via Amendment. 

Interested contractors must have an active System for Award Management (SAM) registration. Firms can register via the SAM website at https://sam.gov/.  

10/13/2022

A site visit has been scheduled for 19 October 2022 at 1:00 PM CDT. Further details to come.  

_________________________________________________________________________________________________

The U.S. Army Corps of Engineers (USACE) Tulsa District hereby issues the Step-One IFB of a Total Small Business Set-Aside Two-Step Invitation for Bid (IFB) that will result in one (1) Firm Fixed-Price contract for the Repair Building 1956 and Replace HVAC at Sheppard Air Force Base, Texas.

The North American Industry Classification System (NAICS) Code is 236220 (Commercial and Institutional Building Construction).

Estimated Magnitude of Construction:  Between $10,000,000 and $25,000,000

PROJECT SCOPE:  The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

TWO-STEP PROCUREMENT: This solicitation and resulting contract are using a Two-Step Sealed Bidding procurement method as described in FAR Part 14.5.

The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid.  The process allows for the Step One technical proposal submission and evaluation to be performed concurrent with the development of the final 100% technical specifications and construction drawings. Step One ensures that only technically acceptable firms participate in the Step Two sealed bid process.  

The Step One solicitation, issued as a Request for Technical Proposal, is issued here.

The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information.  Bid bonds / guarantees are not required to be submitted with the Step One technical proposal. 

Under this bidding process, Step One consists of the request for submission, evaluation and (if necessary) discussion of a technical proposal. Only one (1) technical proposal may be submitted by each offeror. The proposals will be evaluated for technical acceptability. Again, the technical proposal must not include prices or pricing information.

A notice of “acceptable” or “unacceptable” will be forwarded to each Step One offeror upon completion of the technical proposal evaluation and final determination.  The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s https://sam.gov/ website for the benefit of prospective subcontractors.

In Step Two, an amendment to the solicitation will be issued along with the final 100% technical specifications and construction drawings to only those offerors whose technical proposals are determined to be acceptable in Step One.  The normal sealed bidding process in FAR Part 14 will be followed in Step Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step One, will be considered for award. Each bid in Step Two must be based on the bidder's own technical proposal that was submitted, evaluated, and determined to be acceptable in Step One.  Bidders must comply with the 100% technical specifications and construction drawings and the bidder’s acceptable technical proposal.

Bid bonds will be required to be submitted with the Step Two bid submission.

Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued.

A site visit will be scheduled via Amendment. 

Interested contractors must have an active System for Award Management (SAM) registration. Firms can register via the SAM website at https://sam.gov/.  

The U.S. Army Corps of Engineers (USACE) Tulsa District hereby issues the Step-One IFB of a Total Small Business Set-Aside Two-Step Invitation for Bid (IFB) that will result in one (1) Firm Fixed-Price contract for the Repair Building 1956 and Replace HVAC at Sheppard Air Force Base, Texas.

The North American Industry Classification System (NAICS) Code is 236220 (Commercial and Institutional Building Construction).

Estimated Magnitude of Construction:  Between $10,000,000 and $25,000,000

PROJECT SCOPE:  The general scope of the design-bid-build project requires the contractor to repair, replace and improve building systems of a 67,000 square foot facility, including fire suppression, plumbing, HVAC and electrical, and repair damage to interior elements, surfaces, and finishes. Maintain the existing HVAC ductwork and replace only wetted insulation. Add HVAC fault detection and diagnostics when replacing controls to include added temperature monitoring. Replace all wet piping and restore to a comparable system with freeze protection. Make only minor repairs to select features of the fire alarm and mass notification system as directed. Demolish 14 existing jet fuel pumps located in inside various classrooms and install a new fuel pump by existing outside fuel tank.

TWO-STEP PROCUREMENT: This solicitation and resulting contract are using a Two-Step Sealed Bidding procurement method as described in FAR Part 14.5.

The two-step procedure is a combination of competitive procedures designed to obtain the benefits of sealed bidding while ensuring only technically acceptable firms participate in the priced sealed bid.  The process allows for the Step One technical proposal submission and evaluation to be performed concurrent with the development of the final 100% technical specifications and construction drawings. Step One ensures that only technically acceptable firms participate in the Step Two sealed bid process.  

The Step One solicitation, issued as a Request for Technical Proposal, is issued here.

The submission requirements of Step One, Request for Technical Proposal, shall not include any prices or pricing information.  Bid bonds / guarantees are not required to be submitted with the Step One technical proposal. 

Under this bidding process, Step One consists of the request for submission, evaluation and (if necessary) discussion of a technical proposal. Only one (1) technical proposal may be submitted by each offeror. The proposals will be evaluated for technical acceptability. Again, the technical proposal must not include prices or pricing information.

A notice of “acceptable” or “unacceptable” will be forwarded to each Step One offeror upon completion of the technical proposal evaluation and final determination.  The names of the offerors that submitted acceptable technical proposals will be listed on the Government’s https://sam.gov/ website for the benefit of prospective subcontractors.

In Step Two, an amendment to the solicitation will be issued along with the final 100% technical specifications and construction drawings to only those offerors whose technical proposals are determined to be acceptable in Step One.  The normal sealed bidding process in FAR Part 14 will be followed in Step Two. Only bids based upon technical proposals determined to be acceptable, either initially or as a result of discussions for Step One, will be considered for award. Each bid in Step Two must be based on the bidder's own technical proposal that was submitted, evaluated, and determined to be acceptable in Step One.  Bidders must comply with the 100% technical specifications and construction drawings and the bidder’s acceptable technical proposal.

Bid bonds will be required to be submitted with the Step Two bid submission.

Payment and Performance Bonds will be required for the full amount (100%) at the time of contract award before the Notice to Proceed (NTP) can be issued.

A site visit will be scheduled via Amendment. 

Interested contractors must have an active System for Award Management (SAM) registration. Firms can register via the SAM website at https://sam.gov/.