Repair and Calibration of Rohde & Schwarz Spectrum Analyzers
Closed Solicitation Posted
- Solicitation number
- FA930226Q0042V2
- Agency
-
Air Force Test Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811210 Electronic and Precision Equipment Repair and Maintenance
- Place of performance
- Edwards, California 93524, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Air Force Test Center seeks depot-level repair and calibration services for three non-operational Rohde & Schwarz FSV40-N Signal and Spectrum Analyzers (serial numbers 101203, 102145, and 101843) at Edwards AFB, California, with quotes due May 22, 2026. This is a total small business set-aside under Simplified Acquisition Procedures, issued as a Request for Quote.
Place of performance is the contractor's ISO 9001-certified depot facility, with transportation to and from Edwards AFB the contractor's responsibility. Inspection and acceptance occur at Edwards AFB, F1S0AX 412 TW EWB, Edwards AFB, CA 93524-8200. Period of performance is 60 calendar days from award. The NAICS code is 811210, Electronic and Precision Equipment Repair and Maintenance, with a size standard of $34 million. The PSC code is J066.
All work is priced firm fixed-price. Each unit requires full calibration aligned with IEC/ISO 17025 standards using non-binary decision rules with guard-banding compliant with ILAC-G8, verification against original equipment manufacturer specifications, and a minimum 12-month comprehensive warranty covering all parts and labor commencing upon government acceptance. Deliverables include the three repaired and calibrated units plus calibration certificates.
All contractor employees require criminal history background checks per DoDM 5200.08V3 and AFMAN 31-101V3. Personnel requiring frequent base access must obtain AFMC Form 496 identification cards. Contractor personnel must complete Antiterrorism Awareness Level I training within 30 days of award and OPSEC training within 90 days of work initiation. The contractor must comply with OSHA standards, submit a Safety and Health Plan covering fall protection, and adhere to all base security regulations including force protection and health protection condition changes. Weapons and ammunition are prohibited on base. Contracting Officer: Carmen Barahona, (661) 527-3282, carmen.barahona@us.af.mil.
Notice text
This is a Combined Synopsis/Solicitation for the acquisition of depot-level repair and calibration services of (3) non-operational Rohde & Schwarz FSV40-N Signal and Spectrum Analyzers for Edwards AFB, CA.
Please see attached SF 1449 and Statement of Work for further details.
(i) This is a solicitation for commercial services prepared in accordance with the format in RFO 5.201(c), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The Simplified Acquisition Procedures (RFO 12.201-1) will be used for this requirement.
(ii) Solicitation Number: FA930226Q0042 **Please provide the full solicitation number on all packages**
Offerors may utilize the attached SF1449 to complete quote information in addition to a separate quote (in PDF format); ensuring the quote contains information and pricing for all contract line items (CLINs) included on the SF1449. Offerors are required to submit with their quote enough information for the Government to evaluate the requirements detailed in this combined synopsis/solicitation. Offerors shall submit quotes via email, please note the maximum file size is 10MB. Emails over this file size will not be received. Submit only written offers; oral offers will not be accepted.
This solicitation is issued as a Request for Quote (RFQ).
(iii) This solicitation document and incorporated provisions and clauses are in effect through the Revolutionary FAR Overhaul effective 01 February 2026.
(iv) THIS REQUIREMENT WILL BE: Full and Open Competition. The North American Industry Classification System (NAICS) number for this acquisition is 811210 “Electronic and Precision Equipment Repair and Maintenance” with a size standard of $34,000,000.00.
(v) Delivery: Period of Performance will be date of award – 60 DAYS ARO.
(vi)The provision at RFO Part 52.212-1, Instructions to Offerors—Commercial Products and Commercial Services (Oct 2025), applies to this acquisition. Provisions and clauses can be viewed via internet at Acquisition.gov, https://www.acquisition.gov/far-overhaul.
Offerors shall prepare their quotations in accordance with RFO Part 52.212-1. In addition, the following information shall be included:
PROVIDE THE FOLLOWING CONTRACTOR INFORMATION WITHIN YOUR QUOTE:
- SAM UEI:
- TIN Number:
- CAGE Code:
- Contractor Name:
- Payment Terms (NET 30) or Discount:
- Point of Contact Name and Phone Number:
- Email address:
- Warranty:
- Date Offer Expires:
- FOB Destination:
- Estimated Delivery Lead Time:
- Technical Approach
- Completed copy of RFO 52.222-48 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Certification.
(vii) The provision at RFO Part 52.212-2, Evaluation—Commercial Products and Commercial Services (Oct 2025) applies to this acquisition.
***Please read the evaluation criteria closely. If the vendor does not provide a full response, it will be found unresponsive***
The solicitation provides that quotations will be evaluated using Lowest Price Technically Acceptable (LPTA). The award will be made based on the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical acceptability factor contains one non-cost subfactor – see below. The agency will first rank quotations according to price, from lowest to highest, and will evaluate the lowest-priced quotation as either technically acceptable or unacceptable, reserving the right to evaluate additional quotations for technical acceptability if deemed to be in the best interest of the government.
Evaluation Factors:
- Price
- Subfactors:
- The Government will verify the offeror's certification regarding the Service Contract Labor Standards (SCLS) exemption (RFO 52.222-48). If an offeror does not certify for the exemption, their evaluated price must inherently include compliance with the Service Contract Act. No price adjustments will be made by the Government for evaluation purposes; the offered firm-fixed price will be the evaluated price.
- Subfactors:
- Technical Acceptability.
- Subfactors:
- Proposal demonstrating a technical approach and capability to complete the required services in accordance with the Statement of Work (SOW). Your proposal will be deemed unacceptable if a technical approach is not included.
- Subfactors:
The Government will award a purchase order resulting from the RFQ to a responsible offeror whose quote is responsive to the RFQ and considered to be the LPTA.
(viii) Offerors shall include complete copies of applicable provisions, which are included in SF1449. Offers will be considered incomplete if these are not included with the quote.
(ix) The clause at RFO Part 52.212-4, Terms and Conditions—Commercial Products and Commercial Services (Oct 2025), applies to this acquisition.
(x) Additional Contract Requirement or Terms and Conditions: Please find a contemplated list of additional provisions/clauses in the attachments; the final list of clauses is dependent upon actual dollar value of the contract award and may change from those provided in the attachment. Full text for the clauses and provisions can be accessed via https://www.acquisition.gov/far-overhaul.
(xi) Defense Priorities and Allocation System (DPAS): N/A
(xii) Quote Submission Information:
It is the government’s intent to award without negotiations. Therefore, each initial quote should contain the offeror’s best terms from a price and technical standpoint. However, the government reserves the right to request clarifications if the Contracting Officer (CO) deems them necessary.
Offers are due on 22 MAY 2026 at 12:00 PM, Pacific Standard Time (PST).
Offers must be sent via email to:
Mrs. Carmen Barahona at carmen.barahona@us.af.mil AND Ms. Karla Vazquez at karla_lizette.vazquez_montes@us.af.mil
NO LATE SUBMISSIONS WILL BE ACCEPTED.
(xiii) For additional information regarding this solicitation contact:
Primary Point of Contact:
Mrs. Carmen Barahona
Contract Specialist
carmen.barahona@us.af.mil
Secondary Point of Contact:
Ms. Karla Vazquez
Contracting Officer
karla_lizette.vazquez_montes@us.af.mil
QUESTION PERIOD: The period for questions regarding this RFQ will end at 12:00 PM PDT on 20 May 2026. Please send all questions to both POCs listed above. Phone inquiries are not available currently. All questions and answers will be posted to this RFQ.
*** This solicitation does not serve as a financial obligation for the government. No award should be expected by the contractor and no work may begin unless a fully executed contract document is received by the contractor***
Files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA930226Q0042.pdf | ||
| SOW - Spectrum Analyzer Repairs.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| AN/ALQ-131(V) Electronic Countermeasures (ECM) Pod Test Lab Equipment | AFLCMC Robins AFB | No set-aside | |
| Troubleshooting, Calibration and as-needed Remedial Repair of Proof Test Machines | Naval Sea Systems Command | Total Small Business | |
| Repair and Calibration of Keysight Microwave Analyzers | Naval Sea Systems Command | No set-aside | |
| Quanta 650 Electron Microscope - Inspection, PM, Calibration , and Unscheduled Corrective Repairs. | Naval Sea Systems Command | No set-aside | |
| Frequency synthesiz | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity