Remanufacture of Kato Engineering Generator
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912ES23Q0079
- Agency
-
ENDIST St Paul
US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 335312 Motor and Generator Manufacturing
- Place of performance
- Fountain City, Wisconsin 54629, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers - St. Paul District is seeking a contractor to refurbish a generator used to power the USAC Dredge Goetz. The refurbishment includes disassembly, testing, cleaning, checking machined parts, reworking the rotating assembly, installing new parts, reassembly, testing, painting, and shipping. The work must be completed and the generator returned to the Fountain City, WI Service Base by May 1, 2024.
- Complete refurbishment of a generator.
- Testing of electrical components.
- Cleaning and checking of machined parts.
- Installation of new parts including bearings, diodes, capacitor, insulators, RTD’s and a surge protector.
- Reassembly, testing, painting, and shipping of the generator.
Notice text
The U.S. Army Corps of Engineers - St. Paul District requires a Contractor to perform a complete, zero hour refurbishment of a generator used to power the USAC Dredge Goetz.
- Manufacturer: Kato Engineering
- Model #: AA27336001
- Serial # 16881-01
The generator shall be disassembled, and all the electrical components shall be resistance tested and Meg tested. All parts shall be steam cleaned, all winding parts will be dried in at a minimum of 300 degrees, in an oven, then secondary resistance and Meg testing shall be conducted. A report will be provided to the Government with all readings measured. All machined parts shall be checked to confirm they are within factory specifications. The unit will receive a reworked rotating assembly complete with new core built to current design standards. The unit shall also receive new bearings, diodes, capacitor, insulators, RTD’s a surge protector. The unit shall be built to an as new condition with all safety upgrades installed.
The windings shall be over sprayed with a red glyptol epoxy. Unit will be re-assembled and tested against the original test data to insure credibility of the insulation system and operability. A copy of the test data will be provided to the Government. A finish coat of paint on all surfaces shall be applied to the unit before shipment.
Vendor is responsible for the shipment of the Generator unit to their facility and the return to the Government facility in Fountain City.
All work shall be completed and the generator returned to the Fountain City, WI Service Base no later than May 1, 2024.
This solicitation is 100% set-aside for Small Business.
OFFEROR SHALL BE REGISTERED IN SAM (System for Award Management) https://www.sam.gov to include the FAR and DFARS Reps and Certs sections with the NAICS code applicable to the solicitation.
Files
| File | Type | Posted |
|---|---|---|
| W912ES23Q0079 Goetz Generator Remanufacture RFQ.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Remanufacture of Kato Engineering Generator | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Eufaula Powerhouse Hydroelectric Generator Rewind | ENDIST Tulsa | No set-aside | |
| Generator, alternati, in repair/modification of | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity