RECOVERY HOOK FABRICATION- Small Business Set Aside

AMENDMENT 1 INCLUDES:

1) Attachment added-Additional Information for Drawing 5971718  (No Request for Access is required).

End of Amendment 1.

SMALL BUSNIESS SET ASIDE

RECOVERY HOOK FABRICATION

Procurement requirements to fabricate and assemble  Hook, Recovery Pole Assemblies for the mechanical minesweeping system.    The items will be manufactured in accordance with drawings previously developed by U.S. Navy personnel.   The contractor shall provide all personnel, materials, and facilities to accomplish statement of work tasking attached.

1. REQUIREMENTS

1. 1. Fabrication Support

1. 1. 1. The contractor shall fabricate and assemble seventeen (17) minesweeping recovery hooks in accordance with NAVSEA Drawing 5971718. 

1. 1. 1. 1. One (1) of these hooks shall undergo an overload test of 8,000 pounds in accordance to note 3.  Hook shall be measured at the inspection points before and after overload test to ensure hook does not take of permanent deformation of more than .070 inches.  Load test paperwork and deformation inspection shall be provided at time of delivery.

1. 1. 1. 1. The remaining sixteen (16) hooks shall be load tested to a proof load of 3,000 pounds in accordance with note 3. Load test paperwork shall be provided at time of delivery.  These hooks shall be assembled into the Recovery Pole Assembly (1602446).

1. 1. 1. The contractor shall fabricate sixteen (16) Recovery Pole Assemblies (1602446) without the pole and the shackle. The contractor shall provide find numbers 3, 8, 9, 13, 14, and 16 on drawing 1602446 consisting of the following:

Component                                                    Find Number              Drawing                 Qty   

Hook, Recovery Weldment                                    3                              5971749                1

Latch                                                                              8                              5971723                1

Torsion Spring                                                               9                              7116454                1

Screw, Machine Drilled, Slotted                           13                           MS 35275-266        1

Nut, Plain, Hex. 190-24 UNC-2B                           14                           MS 35649-204        1

Washer, Flat                                                                  16                           MS 15795-842       1

Please request access for drawings, Statement of Work, and CDRLs through this announcement only. Must include SAM CAGE Code with request. Small Businesses only.

.

SMALL BUSNIESS SET ASIDE

RECOVERY HOOK FABRICATION

Procurement requirements to fabricate and assemble  Hook, Recovery Pole Assemblies for the mechanical minesweeping system.    The items will be manufactured in accordance with drawings previously developed by U.S. Navy personnel.   The contractor shall provide all personnel, materials, and facilities to accomplish statement of work tasking attached.

1. REQUIREMENTS

1. 1. Fabrication Support

1. 1. 1. The contractor shall fabricate and assemble seventeen (17) minesweeping recovery hooks in accordance with NAVSEA Drawing 5971718. 

1. 1. 1. 1. One (1) of these hooks shall undergo an overload test of 8,000 pounds in accordance to note 3.  Hook shall be measured at the inspection points before and after overload test to ensure hook does not take of permanent deformation of more than .070 inches.  Load test paperwork and deformation inspection shall be provided at time of delivery.

1. 1. 1. 1. The remaining sixteen (16) hooks shall be load tested to a proof load of 3,000 pounds in accordance with note 3. Load test paperwork shall be provided at time of delivery.  These hooks shall be assembled into the Recovery Pole Assembly (1602446).

1. 1. 1. The contractor shall fabricate sixteen (16) Recovery Pole Assemblies (1602446) without the pole and the shackle. The contractor shall provide find numbers 3, 8, 9, 13, 14, and 16 on drawing 1602446 consisting of the following:

Component                                                    Find Number              Drawing                 Qty   

Hook, Recovery Weldment                                    3                              5971749                1

Latch                                                                              8                              5971723                1

Torsion Spring                                                               9                              7116454                1

Screw, Machine Drilled, Slotted                           13                           MS 35275-266        1

Nut, Plain, Hex. 190-24 UNC-2B                           14                           MS 35649-204        1

Washer, Flat                                                                  16                           MS 15795-842       1

Please request access for drawings, Statement of Work, and CDRLs through this announcement only. Must include SAM CAGE Code with request. Small Businesses only.

.