L-Drawing 5971718 Additional Information.docx

DOCX document 12 KB Posted

Attached to
RECOVERY HOOK FABRICATION- Small Business Set Aside
Solicitation number
N61331-21-T-VT61
Issued by

View the file

Other files

File Type Posted
L-COMMERCIAL Clauses.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Drawing 5971718 Additional Information

NAVFAC P-307

NSTM CHAPTER 589 (CRANES)

Note 3 on drawing 5971718 outlines the load testing of the hook, it references NAVFAC P-307 and NSTM CHAPTER 589 (CRANES). Summing up these two references, the greater of the two specifications indicate that the hook shall be tested to 200% the indicated WLL for 2 minutes. The WLL of these hooks is 1500 lbs, thus the test should be conducted at 3000 lbs.

WLL = Working Load Limit

The second half of that same note mentions an overload test, this is a separate test to be performed on a separate hook (hence the odd number of hooks). I need a report for that hook, showing the 8000 lb load test for 2 minutes and a before and after measurement between the inspection points. This hook will not be delivered to the fleet.

End of additional document information.

File details come from the government source that posted it. Updated .