RB-M 45622: FY15 drydocking & repair, STA. New york

The United States Coast Guard Surface Forces Logistics Center, Contracting Procurement Branch 3, intends to issue a Commercial Request for Quote (RFQ) for Drydocking and Repair of RB-M 45622, a 45' Response Boat, Medium (RB-M) homeported at USCG Station New York, Staten Island, NY 10305. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12 Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees.

This acquisition will be issued as a Best Value Request for Quote (RFQ), on or about 04DEC2014. The due date for quotes is estimated to be 06JAN2015 but the final deadline for submission of proposals shall be established upon release of the solicitation. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at https://fbo.gov. Hard copies of the solicitation and specification will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for the RFQ release and all subsequent amendments. FEDBIZOPPS contains an option for automatic notification service. This Requirement will be evaluated using past performance as an evaluation factor. THE ACQUISITION WILL BE SOLICITED AS A TOAL SMALL BUSINESS SET-ASIDE.

The government intends to award one contract as a result of the solicitation. This availability is geographically restricted to a facility located within an area no greater than 320 nautical miles from the RB-M's home station, on navigable waterways and no greater than 50nm off shore. The anticipated Period of performance is sixty-two (62) calendar days, beginning on 15FEB2015. A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the issuance of the solicitation. CD-ROM (s) will be sent via FED-EX. The CD-ROM (s) contain Windows compliant raster/vector formats (e.g.*DWF, etc.).

The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the 45622. This work may include, but is not limited to:

1. General Welding,Provide
2. Ultrasonic Testing (UT) (100) Shots, Perform
3. Hull Plating (U/W Body), Inspect
4. Fendering System, Inspect
5. Tanks (MP Fuel Service), Clean and Inspect
6. Main Diesel Engine to Auragen Generator, Align
7. Main Diesel Engine To Jet Drive, Align
8. Water Jet-Inspect, Perform Service
9. Jet Drive Anodes, Renew
10. Sea Strainers, Inspect
11. Engine Exhaust Piping, Inspect
12. Electrical Isolation, Perform
13. Sea Valves, Overhaul
14. Sea Valves, Renew
15. Diesel Tank, Refue
16. Water Jet Drive, Preserve
17. U/W Body, Preserve (100%)
18. Exterior Non-Skid Pads, Renew
19. Interior Hull Insulation, Inspect
20. Marine Chemist Services, Provide
21. Drydocking
22. Temporary Services, Provide
23. Sea Trial Performance, Provide Support
24. Main Diesel Engine Mount Washers, Replace
25. Low Level Lights FWD
26. Air Intake Baffle, Mast Step, Handhold, Install
27. Tow Reel, Anchor Reel - Preserve

Contractors shall provide a current certification of its drydocking facility/travel lift/or crane as required by the specification, Routine Drydocking Work Item, and SFLC Standard Specification 8634_STD. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures.

For further information or questions regarding this solicitation, please contact Mr. Ryan dela Cruz at (510) 637-5989 or email: Ryan.R.delaCruz@uscg.mil or Mr. Matt Katsaris at (510) 637-5928 or email: Matthew.S.Katsaris@uscg.mil.