Procurement of a High Speed Piezo-Mirror System
Closed Pre-Solicitation Posted
- Solicitation number
- AMDTC-25-0006
- Agency
-
National Institute of Standards and Technology
Department of Commerce
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334516 Analytical Laboratory Instrument Manufacturing
- PSC
- 6640 Laboratory Equipment And Supplies
- Place of performance
- Gaithersburg, Maryland 20899, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The National Institute of Standards and Technology (NIST) is conducting market research for the procurement of a high-speed piezo-mirror system to support advanced laser powder bed fusion additive manufacturing research. The system must meet specific technical requirements including a 3.0 mrad tip/tilt range, 10 kHz unloaded resonant frequency, and an amplifier/controller system capable of up to 1200 W peak output power with 20 kHz bandwidth. This Sources Sought Notice is specifically targeting small businesses with 1,000 or fewer employees operating under NAICS code 334516 (Analytical Laboratory Instrument Manufacturing). Respondents must provide comprehensive information about their equipment capabilities, manufacturer details, technical specifications, customization potential, manufacturing location, available services, and customer references. The response deadline is June 20, 2025, at 12:00 PM EST, with submissions limited to 10 pages and required to be submitted electronically.
This procurement opportunity does not utilize any set-aside designations and is open to qualifying small businesses. No incumbent contractors or potential award values are specified in the notice, as this represents a market research phase rather than a formal solicitation. The technical focus centers on enabling experimental implementation of novel laser scanning techniques that superimpose oscillatory motion on primary laser scan trajectories to eliminate defects and enhance melt pool control in additive manufacturing processes. The system will support NIST's research objectives to improve additive manufacturing productivity through advanced laser control technologies. This market research initiative does not guarantee any contract award and serves to identify capable vendors and establish the scope of available solutions in the marketplace.
Notice text
Procurement of a High Speed Piezo-Mirror System
Files
| File | Type | Posted |
|---|---|---|
| SSN AMDTC-25-0006_FINAL.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Sources Sought Notice for Continuous Wave Parametric Oscillator (CW OPO) Laser System | National Institute of Standards and Technology | No set-aside | |
| Sources Sought Notice for Mid-IR Optical Frequency Comb | National Institute of Standards and Technology | No set-aside | |
| Micro Electron Diffractometer (MicroED) System | Department of Energy | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity