Printed Circuit Board
Closed Solicitation Posted
- Solicitation number
- SLAC_344480_PrintedCircuitBoard
- Agency
-
Office of Science
Department of Energy
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334412 Bare Printed Circuit Board Manufacturing
- Place of performance
- Menlo Park, California 94025, United States
Notice details come from SAM.gov. Updated .
About this opportunity
SLAC National Accelerator Laboratory, operated by the Department of Energy, is soliciting quotes for the turnkey production of five ePix10kHR PC-261-101-22-C01 printed circuit boards, including non-recurring engineering and stencil costs. Quotes will be evaluated based on price and the offeror's ability to meet SLAC's technical requirements as evidenced by manufacturing and schedule plans, deliver within five weeks, and demonstrate past performance manufacturing two similar assemblies. Quotes are due by March 28, 2024.
There is no set-aside designated. The requirement is for five units of the specified printed circuit boards to be delivered within five weeks to SLAC's location in Menlo Park, California. Evaluation will be based on lowest price and ability to meet the delivery schedule. Offerors must complete representations and certifications and register with SAM.gov, and the resulting fixed-price purchase order will be subject to SLAC's standard terms and conditions for commercial supplies.
Notice text
2 versions
Update #2 · Latest ·
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
Amendment 01 to RFQ 344480 Printed Circuit Board
HI,
The following Addendum is being issued for the subject Request for Quotation: 344480 Printed Circuit Board
Attached Bill of Materials
This Addendum modifies the Request for Quotation and must be acknowledged. Failure to acknowledge all addenda could make your proposal non-responsive. Please confirm that the submitted proposal is not changed because of this addendum. If proposal sent is revised because of this, please submit the revised proposal.
The following changes are hereby made to the appropriate documents contained the above-mentioned Request for Quotation (RFQ). All other terms and conditions of the RFQ remain the same.
Thank you very much.
The follow has been attached for you to complete and review:
- (BAA) Buy American Act Certification
- Representations & Certifications Rider
- FP Commercial Supplies-Services T&Cs (August 2023)
Required item(s) listed below:
- This is for turn key of 5.each ePix10kHR PC-261-101-22-C01 – QTY: 5
- PCB NRE & TEST – QTY: 1
- ASSY NRE & STENCILS – QTY: 1
Quote is for product only; no on-site services permitted.
Source selection will be based on Lowest Priced and best Lead-Time.
Technical evaluation criteria are as follows:
- Ability to meet technical and manufacturing requirements.
- SLAC National Lab will evaluate the Offeror’s plan showing the ability to manufacture PCB boards based on supplied technical drawings including but not limited to impedance matching, minimum trace width and spacing, back drilling, fabrication material and component sources.
- Schedule and Delivery Date. SLAC National Lab will evaluate the Offeror’s submitted schedule on whether it meets the University’s project schedule for final delivery. Max Lead time 5 weeks.
- Past performance. SLAC National Lab will evaluate the Offeror’s documentation of prior manufacturing and testing for at least 2 similar/comparable assemblies with specifications that are as close as possible to the drawings. Offerors with no relevant past or present performance history shall receive the rating “Unknown Confidence”.
Please provide a price and lead time quotation by COB 3/28/2024.
Please be advised that the requirement was also posted on SAM.gov.
Send quote to marissat@SLAC.stanford.edu.
The bid closing date for this requirement is 3/28/2024.
Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?
If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.
Buy American Act Certification (BAA) applies to awards that are over $10,000.
Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
All subcontractors are required to register in the System for Award Management (www.sam.gov).
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.
Payment Terms will be NET-30
Freight terms will be FOB Destination Prepaid and Add
You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.
Contact me directly with any questions.
Kind regards,
Marissa Tanomrat
Procurement Commodities Team
SLAC National Accelerator Laboratory
2575 Sand Hill Road
Menlo Park, CA 94025
Email: marissat@slac.stanford.edu
Update #1 ·
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
The follow has been attached for you to complete and review:
- (BAA) Buy American Act Certification
- Representations & Certifications Rider
- FP Commercial Supplies-Services T&Cs (August 2023)
Required item(s) listed below:
- This is for turn key of 5.each ePix10kHR PC-261-101-22-C01 – QTY: 5
- PCB NRE & TEST – QTY: 1
- ASSY NRE & STENCILS – QTY: 1
Quote is for product only; no on-site services permitted.
Source selection will be based on Lowest Priced and best Lead-Time.
Technical evaluation criteria are as follows:
- Ability to meet technical and manufacturing requirements.
- SLAC National Lab will evaluate the Offeror’s plan showing the ability to manufacture PCB boards based on supplied technical drawings including but not limited to impedance matching, minimum trace width and spacing, back drilling, fabrication material and component sources.
- Schedule and Delivery Date. SLAC National Lab will evaluate the Offeror’s submitted schedule on whether it meets the University’s project schedule for final delivery. Max Lead time 5 weeks.
- Past performance. SLAC National Lab will evaluate the Offeror’s documentation of prior manufacturing and testing for at least 2 similar/comparable assemblies with specifications that are as close as possible to the drawings. Offerors with no relevant past or present performance history shall receive the rating “Unknown Confidence”.
Please provide a price and lead time quotation by COB 3/28/2024.
Please be advised that the requirement was also posted on SAM.gov.
Send quote to marissat@SLAC.stanford.edu.
The bid closing date for this requirement is 3/28/2024.
Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?
If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.
Buy American Act Certification (BAA) applies to awards that are over $10,000.
Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
All subcontractors are required to register in the System for Award Management (www.sam.gov).
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.
Payment Terms will be NET-30
Freight terms will be FOB Destination Prepaid and Add
You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.
Contact me directly with any questions.
Kind regards,
Marissa Tanomrat
Procurement Commodities Team
SLAC National Accelerator Laboratory
2575 Sand Hill Road
Menlo Park, CA 94025
Email: marissat@slac.stanford.edu
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Bridge RLS, benchto | Land and Maritime | No set-aside | |
| Ttap SBC | Land and Maritime | No set-aside | |
| Lead, test | Land and Maritime | No set-aside | |
| Circuit card assemb | Land and Maritime | No set-aside | |
| Circuit card assemb | Land and Maritime | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity