Power Tools
Closed Pre-Solicitation Posted
- Solicitation number
- W50S83-26-Q-0018
- Agency
-
Army National Guard
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333991 Power-Driven Handtool Manufacturing
- Place of performance
- Maine 04106, United States
- Points of contact
-
- 101st Contracting Office 101.msg.msc.contracting@us.af.mil (207) 404-7107
- Daniel Curtis daniel.curtis.9@us.af.mil (207) 404-7434
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Air Force, through the 577 Software Engineering Squadron (577 SWES/DIFF), is preparing to issue a solicitation for commercial procurement of specialized tools, hardware, testing instruments, software, and associated material parts supporting the GASNTi2 Block 1 project, with response deadline September 15, 2026. This procurement is set aside for Total Small Business.
Place of performance is 50 Western Ave, South Portland, Maine 04106. The acquisition is structured as a Brand Name or Equal procurement under FAR 52.211-6. Items exactly matching specified manufacturer and part number require no technical submittal; contractors need only certify conformance in writing on the packing slip. Substitutions or "Or-Equal" items require complete technical submittal including manufacturer's product data sheets and side-by-side technical comparison to salient characteristics for written Government approval prior to procurement and delivery.
The tool kit comprises over 130 line items organized by functional category, including power tools (Milwaukee M18 FUEL cordless tools, corded rotary hammers, Husqvarna concrete saw), hand tool sets (driver bits, socket sets, ratcheting wrenches, pliers, specialized items such as conduit benders and pipe threaders), and testing and measurement equipment (GSSI UtilityScan Pro GPR scanner with RADAN 7 post-processing software, GPS systems, RF detection equipment, multimeters, ground resistance testers, circuit locating devices). The kit also includes lockout/tagout kits, safety gear, storage solutions (Milwaukee PACKOUT systems, Yorktown tool rolls, KNAACK boxes), and site preparation equipment. Quantities range from single units for specialized equipment to 36 units for deburring tools, with most standard tools specified in quantities of 3 to 6 units.
Primary PSC is 5180 (Sets, Kits, and Assemblies of Hand Tools); secondary codes are 5130 (Hand Tools, Power Driven) and 6625 (Electrical and Electronic Properties Measuring and Testing Instruments). Primary NAICS is 333991 (Power-Driven Handtool Manufacturing); secondary is 423710 (Hardware Merchant Wholesalers).
Notice text
PRESOLICITATION NOTICE
GASNTi2 BLOCK 1 Material Procurement — Tools and Equipment
1. General Information
-
Document Type: Presolicitation Notice
-
Notice ID: W50S8326Q00018
-
Posted Date: September 1, 2026
-
Response Date: September 15, 2026, 5:00 PM EST
-
Product or Service Code (PSC): 5180 — Sets, Kits, and Assemblies of Hand Tools (Secondary: 5130 — Hand Tools, Power Driven; 6625 — Electrical and Electronic Properties Measuring and Testing Instruments)
-
NAICS Code: 333991 — Power-Driven Handtool Manufacturing (Secondary: 423710 — Hardware Merchant Wholesalers)
-
Contracting Office Address: 577 Software Engineering Squadron (577 SWES/DIFF) 50 Western Ave South Portland, ME 04106
-
Place of Performance: 50 Western Ave South Portland, ME 04106
2. Description & Scope of Work
The Department of the Air Force, Air Force Global Strike Command (AFGSC), through the 577 Software Engineering Squadron (577 SWES/DIFF), is preparing to issue a solicitation for the commercial procurement of specialized tools, hardware, testing instruments, software, and associated material parts. This procurement supports the GASNTi2 Block 1 project.
2.1 Brand Name or Equal Specification
This acquisition is structured as a Brand Name or Equal procurement in accordance with FAR 52.211-6. Manufacturer names and part numbers listed in Section 4 are for the purpose of establishing the salient physical, functional, and performance characteristics required by the Government.
-
Exact Matches: No technical submittal is required for items furnished that exactly match the specified manufacturer and part number, provided the contractor certifies conformance in writing on the packing slip.
-
Substitutions ("Or-Equal" Items): A complete technical submittal IS required for written approval prior to procurement/delivery for any item that differs in manufacturer, model, or part number. The submittal must include manufacturer’s product data sheets, a side-by-side technical comparison to the salient characteristics of the specified model, and justification for the deviation.
2.2 Delivery Terms
-
FOB Destination: All items must be delivered to 50 Western Ave South, Portland, ME 04106.
-
Packaging Requirements: Delivered materials must be packed in weatherproof containers and fully palletized/secured for forklift transportation.
-
Site Access: The vendor is responsible for coordinating with the Government POCs to establish an acceptable delivery schedule. Base access rules, traffic regulations, and random security searches will apply.
Files
| File | Type | Posted |
|---|---|---|
| Install Team Tool Kit.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Tool kit, aircraft main | Aviation | Total Small Business | |
| Tool kit, aircraft main | Aviation | Total Small Business | |
| Tool kit, aircraft main | Aviation | Total Small Business | |
| Tool set floorboard | Aviation | Total Small Business | |
| SPE4A727R0023 - 5180 – fiber optic system / wsic j | Aviation | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity