Portable CNC plasma and oxy-fuel cutting system
Open Special Notice Posted
- Solicitation number
- 80NSSC27948544Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333515 Cutting Tool and Machine Tool Accessory Manufacturing
- Place of performance
- Orlando, Florida 32899, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA Shared Services Center (NSSC) intends to award a sole-source contract to CN-Seamless Inc. of Raleigh, North Carolina, for a portable CNC plasma and oxy-fuel cutting system under FAR 12.102(a), and it has determined that CN-Seamless is the sole provider. Capability statements are due by 4:00 p.m. Central Standard Time on November 12, 2026. The notice uses no set-aside.
NSSC is the procuring center for NASA Kennedy Space Center's Launch Equipment Shop, which will use the system to cut metallic plate and structural material for launch and ground support equipment fabrication. The acquisition is a commercial item procurement under FAR Part 12, classified under NAICS 333515 and PSC 3439. Per the SOW, the contractor fabricates and factory-tests the system at its own facility, then delivers, installs, and secures government acceptance at KSC Building K6-1247, Room 1121, within 15 to 25 business days after award. The package includes a 5-year warranty with a lifetime service contract.
Interested organizations must submit written capability statements that reference the Notice ID to the point of contact, Tracy Bremer (tracy.g.bremer@nasa.gov). Oral communications are not acceptable. Quotes submitted in response to this notice will not be considered. The Government will evaluate capability statements solely to decide whether to conduct the procurement competitively, and it retains discretion not to compete. NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies.
Notice text
VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT.
NASA/NSSC has a requirement for Portable CNC plasma and oxy-fuel cutting system.
NASA/NSSC intends to issue a sole source contract to CN-SEAMLESS INC, 3200 Lake Woodard DR STE
105, Raleigh, North Carolina 27604-3697 under the authority of FAR 12.102(a). It has been determined that
CN-SEAMLESS INC is the sole provider of Portable CNC plasma and oxy-fuel cutting system
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Kennedy Space
Center (KSC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures
prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 333515.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 p.m. Central Standard Time on 11/12/2026. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by
NASA’s Technical End User Team. We are currently only requesting Capability Statements.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-
Advocate-Listing.pdf .
Primary Point of Contact:
Tracy Bremer
Procurement Specialist
tracy.g.bremer@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| INRODES Supplemental RDRE TCA Hardware | Shared Services Center | No set-aside | |
| HAAS CNC Machine | Shared Services Center | No set-aside | |
| RTD Embedded Technologies | Shared Services Center | No set-aside | |
| Facility Modicon PLC Control hardware. Upgrading obsolete drops. | Shared Services Center | No set-aside | |
| nTop License Renewal | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity