Poled Films for Compact Single Shot Power Supplies

Closed Solicitation Posted

Solicitation number
A11-056
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A11-056

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Weapons

Keywords: ferroelectric; pulsed power; explosives; warhead

Objective:

The objective of this effort is to develop energy storage films for very compact single shot power supplies to be used in missiles and munitions.

Description:

Ferroelectric generators are compact single shot power supplies. This generator contains a ferroelectric material that stores energy when it is poled. When this material is shocked, the stored energy is released as electrical energy that can be used to drive various loads. In addition to the ferroelectric effect, the piezoelectric effect could also be exploited. In the case of piezoelectric materials, the electrical energy comes from the shock wave, when it stresses the material. Current generators use ferroelectric ceramics, which tend to crack under g-loading causing the generator to electrically breakdown under high voltage. Therefore, the objective of this effort is to investigate new types of ferroelectric and piezoelectric films with properties that are equal to or better than those of Lead Zirconate Titanate (PZT) 95/5, which is the current standard for ferroelectric materials. In addition, techniques for manufacturing, uniformly poling, and monitoring the polarity of the material while in the munitions are to be investigated. The ferroelectric generators in which these materials will be used will have a diameter less than 40 mm and be capable of delivering 100 kV to a load.

Phase I:

Investigate various ferroelectric and piezoelectric films to determine which films can maintain a surface charge density of at least 39 coulombs/square centimeter for long periods of time. Integrate these films into a Ferroelectric Generator with a diameter less than 40 mm and determine if the generator is capable of delivering 30 to 50 kV to a capacitive load. In order to perform the tasks identified above, the proposing firm will need to have access to explosive test facilities.

Phase II:

Design the generators so that they can deliver at least 100 kV to a variety of resistive and capacitive loads. Develop techniques for manufacturing and uniformly poling the energy storage films. Develop a technique for periodically monitoring these films while in the generator to determine if it is maintaining its polarization.

Phase III:

Ferroelectric materials are used in a variety of military and commercial devices. For example, PZT, which has been around for 50 years, is used in sonars, ultrasound imaging systems, sensors (vibration, pressure, acoustic, proximity, and flow), precision actuators, and power ultrasonic devices for therapy, machine tools, motors, and so on. The proposed new films could potentially be used in some of these applications. One application the Army and Navy are looking at is as a single shot high voltage power supply for use in munitions and warheads.

Files

File Type Posted
A11-056.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors