Phasing Multiple High Power Impulse RF Sources

Closed Solicitation Posted

Solicitation number
A09-179
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A09-179

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Sensors; Weapons

Keywords: impulse antenna; high power microwave; radio frequency; phased array

Objective:

The objective of this effort is to develop methods for phase locking multiple high power impulse radio frequency sources.

Description:

High power in impulse Radio Frequency (RF) sources usually equates to high voltage within the system. At the extremes, megavolt pulsed sources may be necessary to achieve the desired peak power making it problematic to eliminate breakdown and corona sufficiently to achieve acceptable radiation from the source. An alternate to this is to use the proven technique of multiple radiating elements, operating at lower voltage levels, which can be placed in an array such that the far field radiation pattern is typical of one unit operating at a much higher voltage. In this way, many of the systems issues of handling extreme voltage levels in an operational environment are mitigated. As an illustrative example, three phased sources operating at 300 kV would have the same far field radiation pattern as a single source operating at 1000 kV while being much easier to implement in a system that would function in a harsh environment. While most impulse RF sources are difficult to control precisely because they involve spark gap switching, there are several parameters that can be manipulated to induce phased discharges. The parameters are: 1. Change of voltage with respect to time, dV/dt. 2. Absolute value of the voltage. 3. Switch gas species. 4. Switch gas pressure. 5. Use of one oscillator as a master oscillator. If phasing of multiple heads can be achieved reliably and repeatedly, it could enable fielded systems that produce enormous fields at tactically significant distances while requiring modest input voltage levels. The army is seeking innovative approaches for phase locking multiple high power impulse RF sources.

Phase I:

Phase I would consist of building a multi-head test fixture to examine how to drive the heads independently, how the statistical breakdown time varies with V, dV/dt, gas species, gas pressure, etc, and the requirements for a master oscillator such as polarity, how to get it to trigger first, and how to configure the array so that the elements combined constructively.

Phase II:

Design, build, and test antenna arrays, verify their enhanced performance parameters, verify that they can efficiently converted loss energy into RF energy, and verify that they can meet the size requirements of platforms to be specified later. Address manufacturing issues.

Phase III:

PPLICATIONS: Antennas are used in a wide range of military and commercial applications including radars, communications, and directed energy weapons. Other commercial applications for radio frequency and microwave antennas are drying paper, catalyzing chemical reactions, remote sensing, and various medical diagnostic techniques. The main objective of this effort is to develop an antenna array for the Army's directed energy weapon and target discrimination in complex environments programs. This technology would be of use to all the Services as well as the Missile Defense Agency and the Joint Improvised Explosive Device Defeat Office for multiple applications.

Files

File Type Posted
A09-179.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors