PACK 75mm Howitzer Ceremony Cannon Repair Parts
Closed Pre-Solicitation Posted
- Solicitation number
- PANMCC-26-P-0000046526
- Agency
-
MICC Fort Hood
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332710 Machine Shops
- PSC
- 5342 Hardware, Weapon System
- Place of performance
- Texas 76544, United States
Notice details come from SAM.gov. Updated .
About this opportunity
Department of the Army Materiel Command Mission and Installation Contracting Command Fort Hood is conducting a sources sought for PACK 75mm Howitzer Ceremony Cannon repair parts with responses due by June 5, 2026. This is a market-research notice only; the agency intends to determine contractor capability before formal solicitation.
Offerors must possess pre-existing access to required technical data to manufacture the parts, as engineering drawings will not be provided by the government. The requirement spans breechblock assembly (quantity 5), lock firing mechanism assembly (5), lever operating assembly (5), trigger assembly (5), lanyard assembly (5), cover (5), extractor (5), and 6x60 tire/tube/wheel sets conforming to military specifications (quantity 12).
Responses should include firm name, point of contact, phone, email, Unique Entity ID, CAGE code, and small business status with certifications if applicable (SDB, 8(a), HUBZone, SDVOSB, WOSB). Indicate whether your firm will compete as prime contractor or identify subcontracting, joint venture, or teaming arrangements. Provide detailed prior experience on similar requirements as prime or subcontractor, including scope, complexity, timeframe, and pertinent certifications. Address commercial availability of the requirement and supply chain considerations.
NAICS 332710 (Machine Shops); PSC 5342 (Hardware, Weapon System). No set-aside used.
Notice text
2 versions
Update #2 · Latest ·
THIS IS A SOURCES SOUGHT NOTICE ONLY. The purpose of this notice is to determine if you - as a prospective contractor - are able to perform the needs of a this potential requirement. Do not worry about submitting pre-employments documentations or submitting anything that alludes to a quote. At this time documents of that nature are not necessary.
This sources sought is to see if the market is able to provide PACK 75mm Howitzer Ceremony Cannon Parts as follows in the table below:
Breechblock Assembly - QTY 5
Lock, Firing Mechanism Assembly - QTY 5
Lever Op. Assembly - QTY 5
Trigger Assembly - QTY 5
Lanyard Assembly - QTY 5
Cover - QTY 5
Extractor - QTY 5
6x60 Tire/Tube/Wheel (600-16 STA NDT Military 6ply/ 165/185R16 Tube / 6x5.5 Primed Wheel) - QTY 12
Note: Engineering Drawings for this requirement will not be provided by the Government. To be considered technically acceptable, offerors must possess pre-existing access to the required technical data required to manufacture the parts listed above.
In response to the sources sought, please provide the following information:
1. Name of the firm, point of contact, phone number, email address, Unique Entity ID number, Commercial and Government Entity (CAGE) code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code.
2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any.
3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination.
4. Information to help determine if the requirement service is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc.
All questions must be submitted no later than 2:00 PM Central Time (UTC-5) on 4 June, 2026, to both the Contract Specialist and the Contract Officer at the email addresses below. Answer to questions will be provided NLT 10:00 AM Central Time (UTC-5) on 5 June, 2026.
Questions will only be accepted via email. An attachment title Q&A will be added to this posting on 5 June.
Your points of contact regarding this requirement are as follows:
Contract Specialist: Joshua.s.eash.mil@army.mil
Contracting Officer: Tyler.d.tamberelli.mil@army.mil
Please begin subject line on email with PACK 75mm Repair Parts
Update #1 ·
THIS IS A SOURCES SOUGHT NOTICE ONLY. The purpose of this notice is to determine if you - as a prospective contractor - are able to perform the needs of a this potential requirement. Do not worry about submitting pre-employments documentations or submitting anything that alludes to a quote. At this time documents of that nature are not necessary.
This sources sought is to see if the market is able to provide PACK 75mm Howitzer Ceremony Cannon Parts as follows in the table below:
Breechblock Assembly - QTY 5
Lock, Firing Mechanism Assembly - QTY 5
Lever Op. Assembly - QTY 5
Trigger Assembly - QTY 5
Lanyard Assembly - QTY 5
Cover - QTY 5
Extractor - QTY 5
6x60 Tire/Tube/Wheel (600-16 STA NDT Military 6ply/ 165/185R16 Tube / 6x5.5 Primed Wheel) - QTY 12
Note: Engineering Drawings for this requirement will not be provided by the Government. To be considered for award, offerors must possess pre-existing access to the required technical data required to manufacture the parts listed above.
In response to the sources sought, please provide the following information:
1. Name of the firm, point of contact, phone number, email address, Unique Entity ID number, Commercial and Government Entity (CAGE) code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8(a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code.
2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any.
3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination.
4. Information to help determine if the requirement service is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc.
All questions must be submitted no later than 2:00 PM Central Time (UTC-5) on 4 June, 2026, to both the Contract Specialist and the Contract Officer at the email addresses below. Answer to questions will be provided NLT 10:00 AM Central Time (UTC-5) on 5 June, 2026.
Questions will only be accepted via email. An attachment title Q&A will be added to this posting on 5 June.
Your points of contact regarding this requirement are as follows:
Contract Specialist: Joshua.s.eash.mil@army.mil
Contracting Officer: Tyler.d.tamberelli.mil@army.mil
Please begin subject line on email with PACK 75mm Repair Parts
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20 | ACC Warren | No set-aside | |
| Manufacture of M284A2 155mm and other MTC Cannon Tubes | ACC Picatinny | No set-aside | |
| Primer Feed Mechanisms (PFMs) | ACC Picatinny | No set-aside | |
| Lever Castings for the Watervliet Arsenal | ACC Warren | Total Small Business | |
| Handle, P2TC for Watervliet Arsenal | ACC Warren | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity