Opto Mechanical Design and Fabrication
Closed Special Notice Posted
- Solicitation number
- 80NSSC26917797Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 541330 Engineering Services
- PSC
- B599 Special Studies/Analysis- Other
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center (NSSC) has issued a Special Notice for Opto Mechanical Design and Fabrication services to support the Landolt mission at NASA Goddard Space Flight Center. The agency intends to award a sole source contract to OMP INC, a Canadian firm located in Quebec, under the authority of FAR 13.106-1(b)(1)(i), based on a determination that OMP INC is the sole provider capable of performing this specialized work. The procurement falls under NAICS Code 541330 (Engineering Services) and will utilize commercial item acquisition procedures under FAR Parts 12 and 13. This Special Notice was posted on November 20, 2025, and provides interested organizations an opportunity to challenge the sole source determination by submitting evidence of their capabilities.
Organizations wishing to contest the sole source award decision must submit written capabilities and qualifications to the point of contact no later than 2:30 p.m. Central Standard Time on November 25, 2025—a five-day response window. The work involves opto-mechanical design and fabrication of assembled parts for the Landolt mission system, including expertise in element wheel design, bus interfaces, laser tray architecture, finite element analysis, thermal analysis, and radiation simulations. Responses will be evaluated solely to determine whether the Government should conduct a competitive procurement, though the final decision rests entirely with NASA. Interested contractors must submit responses in writing only, as oral communications are not acceptable, and should direct inquiries to Cody Guidry (Procurement Specialist) or Kimberlynn Lancaster (Contracting Officer) at the provided contact information.
Notice text
Synopsis:
NASA/NSSC has a requirement for Opto Mechanical Design and Fabrication.
NASA/NSSC intends to issue a sole source contract to OMP INC | 146 BIGAOUETTE STREET | QUEBEC, Qc G1K 4L2 | CANADA under the authority of FAR 13.106-1(b)(1)(i). It has been determined that OMP INC is the sole provider of Opto Mechanical Design and Fabrication.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC).
The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13.
The NAICS Code for this procurement is 541330.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact no later than 2:30 p.m. Central Standard Time on 11/25/2025. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.
Oral communications are not acceptable in response to this notice.
NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Primary Point of Contact:
Cody Guidry
Procurement Specialist
Cody.d.guidry@nasa.gov
Secondary Point of Contact:
Kimberlynn Lancaster
Contracting Officer
Kimberlynn.m.lancaster@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SATPC0039921 TAB 07 SOW REDACTED.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| RPOC-V Ceiling Increase | Johnson Space Center | No set-aside | |
| ATI alloy sheet | Shared Services Center | No set-aside | |
| Flowserve MKII control valve to replace obsolete Fischer control valve on Complex-41 GN2 | Shared Services Center | 8(a) Sole Source | |
| FY27 SIMULIA Wave6 Renewal | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity