OPM-Macon – Emergency Generator Fueling System Restoration
Closed Pre-Solicitation Posted
- Solicitation number
- SP-OCIO-242535
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333914 Measuring, Dispensing, and Other Pumping Equipment Manufacturing
- Place of performance
- Macon, Georgia, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This pre-solicitation notice seeks a contractor to restore the emergency generator fueling system at the Office of Personnel Management facility in Macon, Georgia. The contractor will remove the existing dual motor external system and replace it with two new submersible motor assemblies and controllers using domestic materials. The contractor must re-pipe the system, add check valves, reuse existing components where feasible, test functionality, and clean the worksite. The period of performance is one month from award. The contractor must provide weekly progress reports and meet with OPM for oversight. Proposals are due by January 30, 2024.
There is no set-aside designation. The work involves restoration of an emergency generator fueling system at the OPM facility in Macon, Georgia, to be completed within one month of award. The contractor staff must undergo background checks and follow all OPM security protocols while onsite.
Notice text
Remove existing dual motor external system and replace with two (2) new 3/4HP submersible motor assembly and controllers. All material to be spec’d as domestic in origin. Re-pipe with 2” piping back to existing flow meters and plumb out existing H-Valve for alternating booster pumps and add swinging check valves to prevent back pressure between motors. All piping to be cut & thread on site to fit. Reuse electrical from existing booster pumps and wire in hook signal for one (1) motor control using existing wiring, conduits, & solenoids and run new conduit and circuit as required for secondary motor assembly. All existing piping not within the first 10’ of the tank will be reused including but not limited to the day tanks, solenoids, return line & pumps, etc. Dry test both motors for wiring and purge lines to all day tanks. Test all for functionality. Clean our debris from site.
Files
| File | Type | Posted |
|---|---|---|
| Draft SOW_RFI_1.12.24.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity