One-time CNC Health Check and Preventative Maintenance Assessment
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- FA812520Q0083
- Agency
-
Air Force Sustainment Center
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Tinker Afb Ok 73145 USA
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks to procure one-time Computer Numerical Control (CNC) health check and preventative maintenance assessment services. The Department of the Air Force Materiel Command Air Force Sustainment Center requires the contractor to assess 16 government-owned CNC machines located at Tinker Air Force Base in Oklahoma. The contractor must perform initial health assessments and preventative maintenance, inspecting on average one machine per week and submitting invoices no less than monthly. Proposals will be evaluated based on past performance and price, with the work to be performed between July 6, 2020 and October 23, 2020. The response due date for proposals is June 12, 2020.
There is no set-aside designation for this procurement. The NAICS code is 541330 and PSC code is J019. The incumbent contractor is unknown. The contractor will assess 16 machines in the order specified, generating evaluation reports within five business days of each assessment and a preventative maintenance schedule upon completion. All work will be performed at Tinker Air Force Base in Oklahoma City, Oklahoma.
Notice text
4 versions
Update #4 · Latest ·
AMENDMENT 03 ***** 04 JUNE 2020 ****** AMENDMENT 03
The response due date for all offers is hereby changed to 12 June 2020 at 10:00 AM CDST local time.
This amendment extends the response due date until 12 June 2020 at 10:00 AM; attaches an updated Performance Work Statement, (paragraphs 1.3, 1.3.1, and 1.3.3 are updated/inserted) to extend the period of performance and allow incremental billing; and updates CLIN 0001 quantity / structure to allow incremental billing for approved HA/PM Assessments.
Offerors are required to submit 1 signed copy of the Amendment 03 SF30 cover page with their response no later than 10:00 AM local (CDST) on 12 June 2020.
AMENDMENT 02 ***** 27 MAY 2020 ****** AMENDMENT 02
The response due date for all offers is hereby changed to 5 June 2020 at 10:00 AM CDST local time.
AMENDMENT 01 ***** 21 MAY 2020 ****** AMENDMENT 01
NOTE - the BETA.SAM.GOV posting is hereby corrected to remove the 8(a) Set-Aside marking. This solicitation is not small business set-aside and is available for full and open competition for all vendors.
Amendment 01 is posted on 21 May 2020 to incorporate FAR Clause 52.212-1 Instructions to Offerors-Commercial Items by reference and FAR Clause 52.212-2 Evaluation - Commercial Items by full text into the solicitation. All other terms and conditions remain unchanged and in full force and effect.
Offerors are required to return one (1) signed copy of the Amendment SF30 page 1 with their RFQ response. The response date for this solicitation is not extended and remains 10:00 AM local (CDST) on 27 May 2020.
ORIGINAL ANNOUNCEMENT -
The Contractor shall provide the technical expertise, training, engineering support, parts, material, and travel
necessary to enable the Government to maintain and repair Government-owned Computer Numerical Control
(CNC) equipment located at Tinker Air Force Base, Oklahoma. The Contractor shall provide support as required
to the Government by performing health and preventative maintenance assessments. All work shall be
performed in accordance with the Performance Work Statement.
Update #3 ·
AMENDMENT 02 ***** 27 MAY 2020 ****** AMENDMENT 02
The response due date for all offers is hereby changed to 5 June 2020 at 10:00 AM CDST local time.
AMENDMENT 01 ***** 21 MAY 2020 ****** AMENDMENT 01
NOTE - the BETA.SAM.GOV posting is hereby corrected to remove the 8(a) Set-Aside marking. This solicitation is not small business set-aside and is available for full and open competition for all vendors.
Amendment 01 is posted on 21 May 2020 to incorporate FAR Clause 52.212-1 Instructions to Offerors-Commercial Items by reference and FAR Clause 52.212-2 Evaluation - Commercial Items by full text into the solicitation. All other terms and conditions remain unchanged and in full force and effect.
Offerors are required to return one (1) signed copy of the Amendment SF30 page 1 with their RFQ response. The response date for this solicitation is not extended and remains 10:00 AM local (CDST) on 27 May 2020.
ORIGINAL ANNOUNCEMENT -
The Contractor shall provide the technical expertise, training, engineering support, parts, material, and travel
necessary to enable the Government to maintain and repair Government-owned Computer Numerical Control
(CNC) equipment located at Tinker Air Force Base, Oklahoma. The Contractor shall provide support as required
to the Government by performing health and preventative maintenance assessments. All work shall be
performed in accordance with the Performance Work Statement.
Update #2 ·
AMENDMENT 01 ***** 21 MAY 2020 ****** AMENDMENT 01
NOTE - the BETA.SAM.GOV posting is hereby corrected to remove the 8(a) Set-Aside marking. This solicitation is not small business set-aside and is available for full and open competition for all vendors.
Amendment 01 is posted on 21 May 2020 to incorporate FAR Clause 52.212-1 Instructions to Offerors-Commercial Items by reference and FAR Clause 52.212-2 Evaluation - Commercial Items by full text into the solicitation. All other terms and conditions remain unchanged and in full force and effect.
Offerors are required to return one (1) signed copy of the Amendment SF30 page 1 with their RFQ response. The response date for this solicitation is not extended and remains 10:00 AM local (CDST) on 27 May 2020.
ORIGINAL ANNOUNCEMENT -
The Contractor shall provide the technical expertise, training, engineering support, parts, material, and travel
necessary to enable the Government to maintain and repair Government-owned Computer Numerical Control
(CNC) equipment located at Tinker Air Force Base, Oklahoma. The Contractor shall provide support as required
to the Government by performing health and preventative maintenance assessments. All work shall be
performed in accordance with the Performance Work Statement.
Update #1 ·
The Contractor shall provide the technical expertise, training, engineering support, parts, material, and travel
necessary to enable the Government to maintain and repair Government-owned Computer Numerical Control
(CNC) equipment located at Tinker Air Force Base, Oklahoma. The Contractor shall provide support as required
to the Government by performing health and preventative maintenance assessments. All work shall be
performed in accordance with the Performance Work Statement.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| One-time CNC Health Check and Preventative Maintenance Assessment | Award Notice | |
| This notice | Solicitation | |
| One-time CNC Health Check and Preventative Maintenance Assessment | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Trumpf Pilz Programming Service | Air Force Sustainment Center | No set-aside | |
| Preventative Maintenance and Repairs | ACC Warren | No set-aside | |
| F110 Motional Transducer Remanufacture | Air Force Sustainment Center | No set-aside | |
| CNC Small Wire EDM | Air Force Test Center | No set-aside | |
| Service Repair for Sciaky Spot Welder | Air Force Sustainment Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity