Non-Lethal Munitions for Defeating Improvised Explosive Devices (IEDs)

Closed Solicitation Posted

Solicitation number
A13-058
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A13-058

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Weapons

Keywords: Pulsed power; Munitions; High Voltage; Electrical Breakdown; Laser; high power Microwave; Acoustic

Objective:

The objective of this effort is to develop non-lethal munitions that can be used to remotely pre-detonate IEDs.

Description:

Improvised Explosive Devices (IEDs) come in many forms including road side, vehicle borne, human borne, and in structures such as rooms. Of the 24 Army Science and Technology (S&T) Challenges, defeating IEDs includes the following three challenges: Force Protection – Soldier and Small Unit, Force Protection – On the Move (Ground), and Overburdened – Physical Burden. In order to meet these challenges, new methods must be developed for defeating IEDs by the individual soldier, while minimizing the collateral damage to humans. For example, methods for clearing rooms of IEDs without harming personnel in the room provided there are no IEDs present need to be developed. One such munitions is High Power Microwave (HPM) grenades. These are non-lethal grenades that generate an electromagnetic pulse that could be used to defeat the electronics used to activate IEDs or that could be used to attack blasting caps. In order to minimize the impact of added mass, training, etc. on the individual soldier, these munitions should fit into existing form factors such as hand or robot delivered munitions, 40 mm grenades, Rocket Propelled Grenades (RPGs), and Stinger, Hydra, and Javelin missiles. Since HPM may not be the only approach for defeating IEDs, additional innovative approaches are being sought. These munitions can be explosive or non-explosive driven. This topic aligns with the Fires Center's concept for Directed Energy employment.

Phase I:

The goal of Phase I is to develop non-lethal munitions for defeating IEDs by the individual soldier. Phase I should include defining the defeat mechanism that is to be used, deterimining the major components of these munitions, and conducting a proof-of-principle experiment in order to validate the technical approach.

Phase II:

The objectives of Phase II are to finalize the design of the counter IED munitions, to build and test prototypes, to verify that these munitions have an effect on a variety of IEDs through testing, and to begin to address issues associated with integrating them into currently fielded form factors such as the 40 mm Grenade, RPG, or Javelin missile. The proposing Firm should also identify any special handling or manufacturing issues that were identified during the prototyping process.

Phase III:

The primary use for these munitions would be military and law enforcement. Since IEDs know no boundaries, we have already seen them in use in the US. Therefore, these same non-lethal munitions would benefit the bomb squads of local, state, and federal law enforcement. One specific application that would be of benefit to both the military and law enforcement is room clearing of IEDs to minimize the threat to our soldiers and law enforcement agents and occupants of the building assuming there was no IED present.

Files

File Type Posted
A13-058.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors