New Cooling Tower Installation Bldg 1319 Newport Rhode Island

The contractor shall provide all required materials, labor, services, equipment, and incidental related work as required to install two new cooling towers, as shown on NUWCDIVNPT Drawings 09-43A. The work shall include but shall not be limited to the following:



a. Removal of existing cooling tower and associated steel and concrete supporting structure in its entirety. This shall occur after the new towers are installed and operational.



b. Installation of two new government furnished cooling towers including all associated crane work to move the towers from their existing location in the fleet parking area to the job site.



c. All required excavation, fabrication, erection, and welding for the new concrete and steel supporting structure for the two new cooling towers



d.

The provision of new steel supply and return piping, new 1†diameter PVC piping, and 1†diameter copper piping and all associated work including wall penetrations and capping of existing piping.



e. Provide 4 variable frequency drives for tower motors; direct digital controls for tower control including the complete programming of all new components; new electrical feeds and connections.



f. Intercept existing underground electrical conduits and provide a new electrical hand hole where indicated.



g. Trenching, backfilling, and paving where new piping and electrical feeds will be run



h. Provide new 4†PVC drain for new cooling towers and connect to sanitary manhole 1.