Navy Shipboard Gas Turbine Rotating Detonation Combustor Operation with Diesel Fuel
Open Pre-Solicitation Posted
- Solicitation number
- DON27BZ02-NV019
- Agency
-
Office of Naval Research
Secretary of the Navy, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Points of contact
-
- Jacob Guthrie jacob.d.guthrie.civ@us.navy.mil
- Kyle Hujber kyle.f.hujber.civ@us.navy.mil
- Paul DeSario paul.a.desario.civ@us.navy.mil
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Navy's Office of Naval Research intends to solicit a Phase I SBIR effort under topic DON27BZ02-NV019, with responses due January 6, 2027. The procurement is set aside for Total Small Business. The notice is ITAR-controlled and requires CMMC Level 2 (Self) compliance.
The required work is to develop and demonstrate a scaled high-density Rotating Detonation Combustor (RDC) that uses NATO F76 diesel fuel (MIL-DTL-16884R). The awardee must also perform thermodynamic analysis of Navy RDC-equipped shipboard gas turbine concepts to determine reductions in stack length, efficiency improvements, design limitations, and development gaps. The background describes current surface combatant arrangements of four GE LM-2500 propulsion gas turbines and three Rolls Royce 501-K34 ship service generators, all presently simple cycle. Focus areas are Advanced Materials and Sustainment & Logistics. Keywords include Rotating Detonation, Plasma Assisted Combustion, Power Density, and Diesel Fuel, Gas Turbine. The notice was posted November 4, 2026.
Notice text
DoD SBIR topic DON27BZ02-NV019
Component: NAVY
Command: ONR
Phase: SBIR Program Phase I Action
Technology Areas: None
Focus Areas: Advanced Materials; Sustainment & Logistics
Keywords: Rotating Detonation; Plasma Assisted Combustion; Power Density; Diesel Fuel, Gas Turbine
ITAR: Yes
CMMC: Level 2 (Self)
Objective:
Develop and demonstrate a scaled high density Rotating Detonation Combustor (RDC) that uses NATO F76 diesel fuel (MIL-DTL-16884R) and perform thermodynamic analysis on developed Navy RDC equipped shipboard gas turbine concepts to determine related performance benefits including reduction of stack up length, efficiency improvements, design limitations, and development gaps.
Description:
As background, the typical arrangement used on U.S. Navy surface combatants consists of four (4) large (20+MW class – GE LM-2500) gas turbines for propulsion and three 3 smaller (3 MW class – Rolls Royce 501-K34) gas turbines for ship service electrical power generation.
Presently U.S. gas turbine powered warships use simple cycle machines. However, complex cycles with reheat and other cycle enhancements have been considered and analyzed with the potential for increased efficiency. Further examinations have been performed to evaluate improvements in maintainability/reliability, overall generator set power density/stack up length, and alternative configuration installation flexibility for use in overall electric plant designs.
RDCs are advanced power-generation and propulsion devices that operate by propagating one or more supersonic detonation waves continuously around an annular chamber. As fresh fuel and oxidizer are continuously injected into the channel, the rotating shock wave rapidly compresses and ignites the mixture, creating a self-sustaining zone of intense heat and pressure. Thermodynamically, RDCs utilize a detonation-driven pressure-gain cycle, which is most accurately modeled by the Fickett-Jacobs-Salsburg (FJS) cycle and frequently approximated as the constant-volume Humphrey cycle. Unlike conventional gas turbines that rely on the constant-pressure Brayton cycle, the FJS detonation cycle in an RDC generates a substantial net increase in total pressure across the combustor. This inherent pressure gain drastically reduces the workload required by upstream mechanical compressors and significantly boosts the overall thermal efficiency and power output of the gas turbine system. While initial government and industry investigations have centered on the use of RDCs in aerospace applications, future shipboard applications will require a greater understanding of the ability to operate with diesel fuel for long continuous operation as well as a quantification of performance benefits that can be achieved in overall shipboard electric architecture design.
While not required, discussions with Navy shipboard gas turbine Original Equipment Manufacturers (OEM) are recommended.
Phase I:
Perform an analysis of an RDC combustor ignition and continuous operation with NATO F76 fuel by the end of the Base period. Assemble and demonstrate an initial limited laboratory experiment/subscale test to verify analysis findings in coordination with Navy personnel. Complete a conceptual design for a combustor prototype and associated liquid fuel system, to include prototype design refinements, fabrication approach, and testing strategy that should include ignition and endurance operation with defined measurements in coordination with Navy personnel and within the scope of a Phase II budget. Prepare a Phase II plan.
Phase II:
Construct a combustor prototype and associated liquid fuel system. Perform startup and endurance testing for up to 500 hours as defined in Phase I utilizing F76 fuel. Based upon results generated from testing, conduct thermodynamic analyses/model of a marine gas turbine utilizing an RDC primary combustor as well as a thermodynamic analysis/models of marine gas turbine reheat cycles utilizing an RDC inter-turbine (single reheat) and intra-turbine (continuous reheat) in collaboration with Navy personnel. From this analysis, determine impact on overall efficiency, reliability, operating life, power density, and future development gaps. Prepare a Phase III commercialization/transition plan.
Phase III:
Demonstrate a full-scale liquid fuel combustor operating continuously for 500 hours. Based on Phase II analysis, develop a full-scale RDC-based gas turbine, either simple or complex cycle, and conduct performance testing prior to an at sea demonstration. Once complete, examine and upgrade the system for marinization requirements accounting material and maintainability improvements to successfully operate in a naval environment.
Examine and demonstrate the RDC based gas turbine in a CIPES electric plant configuration to validate ship benefits for overall operational performance and improvement in platform increases in power density. Commercial dual use application may include commercial maritime ships and offshore drilling and production platforms.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Lightweight, Energy-Efficient Portable Nitrogen Generator for Expeditionary Operations | Department of the Navy | Total Small Business | |
| SI-Enabled “Just-in-time” Knowledge Delivery for Naval Maintainers | Office of Naval Research | Total Small Business | |
| Attritable Turbine for Low-Cost Attack Systems (ATLAS) | Office of Naval Research | Total Small Business | |
| Cleaner for the Time Domain Reflectometer Tank Level Indicator | Naval Sea Systems Command | Total Small Business | |
| Computational Frameworks for the Development and Qualification of Additive Manufacturing-Tailored Wire Feedstock for Naval Directed Energy Deposition | Office of Naval Research | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity