Nanosatellite to Standard Army Handheld Radio Communications System
Closed Solicitation Posted
- Solicitation number
- A12-067
- Agency
-
Space and Missile Defense Command
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic A12-067
Component: ARMY
Command: SMDC
Phase: SBIR Program Phase I Action
Technology Areas: Information Systems; Sensors; Space Platforms
Keywords: nanosatellite; communications; BLOS; handheld radio; PRC-152; PRC-117
Objective:
Develop a communications system (transceiver, antenna, etc) for a nanosatellite that would enable a nanosatellite to transmit/receive with an unmodified, standard Army issue handheld radio, The Army handheld radio is constrained to transmit at a low power level with a standard omnidirectional antenna. The satellite would relay the signal, thereby enabling communication with another Army radio beyond line of sight.
Description:
The Space & Missile Defense Command responsive space technology program has been developed to meet the space-related urgent needs of the warfighter in a timely manner. The operational concept calls for responsive space satellites to augment or reconstitute existing "big space” systems. Nanosatellites with masses on the order of 10 kg (22 lbs) or less are receiving an increasing level of attention within the national security community. A large constellation of nanosatellites in multiple Low Earth Orbit (LEO) orbital planes could provide persistent, UAV-like effects for warfighters in one or more theaters. Moreover, dismounted US Army soldiers have a requirement to communicate beyond line of sight on their existing dismounted radios such as the PRC-117 and PRC-152. While man-pack radios with high power batteries and directional antennas can close the link with medium and geosynchronous orbit satellite systems, this man-pack system is frequently not available to dismounted soldiers who are inserted and extracted into remote regions by helicopter. A communications solution is required for the case when a solder has only a low power transmitter with a low gain antenna.
Low Earth Orbit operation greatly reduces the distance between the soldier’s radio and the relay satellite, thereby reducing the amount of antenna gain and transmitter power required by the soldier’s radio. However, in LEO, a constellation of satellites would be required for persistent communications. The SMDC-ONE is a representative affordable nanosatellite bus suitable for this orbit. A constellation of nanosatellites has the potential to realize significant savings in development, testing, and launch when compared to traditional satellite systems. To realize the potential benefits of the nanosatellites, payload technology must be miniaturized to fit within the size, weight, and power constraints of the nanosatellite. The Block I of the SMDC-ONE design was capable of a maximum of 10,417 bits per second at Ultra High Frequency (UHF) and served well as a technology demonstrator, but is incompatible with existing Army radios.
The Army is looking for innovative solutions that will push the state of the art of the SMDC-ONE’s communication capabilities. Contractors are requested to propose changes to the SMDC-ONE transceiver design, while remaining inside the physical size and weight constraints of the current bus. These changes possibly include the un-deployed antenna and radio , as well as other features required to close the communications link. For purposes of the design, contractors should assume relay between two unmodified, standard issue army hand-held radios (AN/PRC117F or AN/PRC152) that are currently deployed in the field. Additionally, the transceiver should have an adjustable data rate mode for command, control and data transfer. Data rates from 1,000 to 56,000 bits per second at UHF frequencies are desired. An S band link in addition to the UHF communications link is desired that would significantly improve the data throughput capabilities over the UHF link is desired. The design may assume that the spacecraft attitude be controlled. The design should also include a calculation of transmitter efficiency and a plan for heat dissipation.
Researchers into nanosatellite to standard army issue handheld radio communications innovations for nanosatellites should take several constraints under consideration, including:
• Bandwidth = 25 KHz (Goal) – 50 KHz(Threshold) including Doppler Shift compensation (+/- 10KHz at UHF) • Doppler shift compensation should not require the user to have A Priori knowledge of the satellite’s position or velocity, i.e., Doppler shift should be compensated automatically • Maximum data rate = 12 Kbps (Threshold) – 56 Kbps (Goal) • 25 MHz for S-band channels • Capability to accommodate multiple users using any multiple access techniques • Capable of Type 1 encryption (Goal) or AES 256 (Threshold) • Must include Forward Error Correction (FEC) for the adjustable data rate mode • Must be able to transmit and receive at both 230-270MHz and 350-380MHz • Must be tunable in frequency steps of 1KHz • Must be capable of 2-Frequency Shift Keying (2-FSK) with adjustable frequency deviation from 1KHz-10KHz and Frequency Modulation (FM) (Threshold) and be able to implement other modulations through over the air programming (Goal) • Minimum Detectable Signal (MDS) = -110dBm (Threshold) or -125dBm (Goal) • Transmitter radiated power greater than 4Watts (Threshold) or 10 Watts (Goal) • Size to fit within (10cm x 10cm x 10cm) cube (Threshold) or (10cm x 10cm x 5cm) (Goal) • Radio must consume less than 14.7 watts • Effective radiated power should be 8 to 10 watts
Phase I:
Conduct feasibility studies, technical analysis and simulation, and conduct small scale proof of concept demonstrations of a communications subsystem. Develop an initial conceptual approach to incorporate the communications subsystem into an SMDC-ONE class nanosatellite, and include system estimates for mass, volume, power requirements, and duty cycles. Deliverables should include monthly status reports, feasibility demonstration reports and any hardware produced.
Phase II:
Implement technology assessed in Phase I effort. The Phase II effort should include initial communication system designs, mock-ups, and breadboard validation in a laboratory environment. Initial technical feasibility shall be demonstrated, including a demonstration of key subsystem phenomena. Deliverables should include quarterly status reports, design documentation and any hardware produced.
Phase III:
The contractor shall finalize technology development of the proposed nanosatellite communications system and begin commercialization of the product. In addition to military communications, commercial civilian applications for a nanosatellite communications system could include space-based satellite communications. Phase III should solidly validate the notion of a nanosatellite communications system to enable an SMDC-one nanosatellite to communicate with standard army handheld radios with a low level of technological risk. The goal for full commercialization should ideally be Technology Readiness Level 9, with the actual system proven through successful mission operations. Specifically, Phase III should ultimately produce Nanosatellite communications system to enable an SMDC-one nanosatellite to communicate with standard army handheld radios. The contractor must also consider manufacturing processes in accordance with the president’s Executive Order on “Encouraging Innovation in Manufacturing” to insure that the innovations developed under this SBIR can be readily manufactured and packaged for transportation and deployment.
During Phase III, this comms system upgrade could conceivably transition or expand to the appropriate division of the Army Program Executive Office for Missiles and Space (PEO M&S) upon full rate production and deployment. PEO M&S could maintain a stockpile of nanosatellite Communications modules. Simultaneously, commercial versions of the nanosatellite communications innovations could be produced for civilian and scientific applications. Commercial satellite manufacturers could incorporate them into a variety of commercial satellite systems for sale to various interested customers. Commercial companies could also provide competitively priced nanosatellite-based communications services to paying customers, including the national security community.
PRIVATE SECTOR COMMERCIAL POTENTIAL: There is a perceived potential for commercialization of this technology. The primary customer for the proposed technology will initially be the Department of Defense, but there could also be other applications in the areas of commercial satellite communications.
Files
| File | Type | Posted |
|---|---|---|
| A12-067.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity