Multi-task Milling/Turning Center Machine
Closed Solicitation Posted
- Solicitation number
- W911QX26QA175
- Agency
-
ACC Aberdeen Proving Ground
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- Place of performance
- Aberdeen Proving Ground, Maryland 21005, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Army Contracting Command at Aberdeen Proving Ground seeks one multi-task milling/turning center machine via purchase order, with proposals due September 20, 2026. The response deadline was extended by 10 calendar days to allow prospective quoters adequate time to review revised technical requirements. No set-aside applies.
Place of performance is Aberdeen Proving Ground, Maryland 21005. The NAICS code is 333517, Machine Tool Manufacturing; PSC is 3408, Machining Centers And Way-Type Machines.
The machine must be equipped with a FANUC 0i-TF plus operators panel and designed for heavy and interrupted cutting with long-term high accuracy and superior surface finishes. Required capabilities include milling, drilling, and rigid tapping with glass scales on Y1, X1, and Z1 axes; a 635mm swing over bed; 67mm maximum bar capacity; turning diameter of 1mm–520mm; dual spindles (right and left) operating at up to 5000 rpm with 25 horsepower and 240 foot-pounds; a milling spindle at 12,000 rpm with 25 horsepower and 42 foot-pounds; a C-axis programmable to 0.001 degree; a B-axis capable of 240-degree tilt in 0.0001-degree increments; and a 60-position tool holder with tool changes within 1.7 seconds. The machine must meet specified positioning accuracy and repeatability standards, include servo-driven steady rest brackets, CAPTO C6 tooling, hinge belt conveyor with coolant tank, 1000 psi chipblaster coolant system with 42-gallon capacity, coolant chiller with 34,000 BTU capacity, mist collector, Renishaw probe kit, and Samchully HC-08 chucks with multiple jaw sets. Physical envelope is 4,615mm length, 2,285mm width, 2,630mm height, operating on 205–235V, 3-phase, 60 Hz power drawing less than 175 amps.
The contractor must provide machine controller, operator training, freight from port, rigging, offloading, assembly, leveling, grouting, and associated services. One-year warranty on labor and two-year warranties on machine controls and FANUC Control are required. Extensive tooling from manufacturers including Coromant, Schunk, and Techniks is required.
Notice text
2 versions
Update #2 · Latest ·
The Government intends to award a purchase order for one (1) Multi-task Milling/Turning Center Machine.
The purpose of this amendment is to clarify the technical requirements referenced in the attached Salient Characteristics. The response deadline is extended by 10 calendar days to allow prospective quoters adequate time to review the revised requirements and submit quotations.
Update #1 ·
The Government intends to award a purchase order for one (1) Multi-task Milling/Turning Center Machine.
Files
| File | Type | Posted |
|---|---|---|
| Combination Synopsis-Solicitation.docx | DOCX document | |
| Salient Characteristics.doc | DOC document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Sources Sought for Mill Turning Center Machine | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| One (1) DN PUMA Vertical Turning Center (VTC) 1620M Machine | Aviation | No set-aside | |
| Milling Equipment | Department of Energy | No set-aside | |
| Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services | ACC Aberdeen Proving Ground | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity