Mobile Gantry Crane

Closed Solicitation Posted Dec 12, 2025

Solicitation number: FA520526QB015
Agency: Pacific Air Forces Air Force, Department of Defense
Responses due: Dec 18, 2025, 6:00 PM ET
Set-aside: No set-aside

Opportunity facts

NAICS code: 333923 Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
PSC: 3950 Winches, Hoists, Cranes, And Derricks
Place of performance: Misawa Japan
Points of contact: Kade Forrester kade.forrester.1@us.af.mil (315) 226-8072

Katie Kershaw katie.kershaw@us.af.mil (315) 226-8035

Notice details come from SAM.gov. Updated Dec 17, 2025.

About this opportunity

Written by GovTribe AI · Dec 17, 2025

The 35th Contracting Squadron at Pacific Air Forces is soliciting quotes for a mobile gantry crane to be delivered directly to Misawa Air Base, Japan. The procurement seeks a crane meeting or exceeding detailed specifications, including a minimum 10-ton lifting capacity, steel frames with an 18" main trolley I-beam, adjustable height between 12'7" and 19'5", and various specialized features such as pin-locking casters with 4-position swivel locks, a powered 120v AC hoist with variable speed capability, and self-aligning I-beams with safety cables. Vendors must demonstrate technical capability, offer fair and reasonable pricing, and provide evidence of past performance to be competitive. The contract will be awarded on a best value basis considering these three evaluation factors. The original response deadline of December 17, 2025 at 10:00 am EST was amended on December 17, 2025 to extend the due date to December 18, 2025 at 6:00 pm EST, and interested vendors must submit quotes with a cut sheet verifying compliance with all salient characteristics.

This solicitation carries no set-aside designation and is open to full and open competition. The government notes that funds are currently not available and reserves the right to cancel the solicitation at any time. While no specific award value or budget range is disclosed in the solicitation notice, vendors should anticipate a single unit delivery requirement with a 45-day delivery timeline following receipt of order. The crane must be shipped directly to the 13 FGS/MXGP unit at Misawa Air Base located in Misawa, Aomori, Japan. The procurement is categorized under NAICS 333923 (Overhead Traveling Crane, Hoist, and Monorail System Manufacturing) and PSC 3950 (Winches, Hoists, Cranes, And Derricks).

Notice text

2 versions

Update #2 · Latest · Dec 17, 2025

Amendmned to extedn due date on 17 Dec 25.

***********************

The 35th Contracting Squadron is seeking interested vendors able to source and deliver a Mobile Crane that meets or exceeds the below specificaitons. the requiremetn requires direct delivery to Misawa Airbase Japan.

Please see attached RFQ for additional details and requirements.

MOBILE GANTRY CRANE REQUIREMENTS:

-CAPACITY: MIN OF 10 TON

-STEEL FRAMES AND STEEL I-BEAMS

-18” MAIN TROLLEY I-BEAM

-HEIGHT MAX: 19’ 5”

-HEIGHT MIN: 12’ 7”

-WIDTH: 15’ 8” MAX AT CASTERS X OVERALL 15’ 0” AT GANTRY TOP I-BEAM

-DEPTH: 7’ 10” MIN X 11’ 4” MAX,

-CLEARANCE: 18” BETWEEN LEGS UNDER I-BEAM AT MAX HEIGHT AND MAX SPREAD

-SELF-ALIGNING I-BEAMS

-SAFETY CABLE TO PREVENT OVER-SPREADING I-BEAMS WHILE BEING ADJUSTED

-PIN LOCKING CASTERS WITH 4-POSITION SWIVEL LOCKS

-10” DIA POLYURETHANE CASTERS - 8 EACH

-BRAKES ON THE CASTERS

-COMPATIBLE PUSH TROLLEY: HEADROOM OF 4.7" AND FLANGE WIDTH ADJUSTMENT OF 5.5" - 8.66" (ACTUAL 6")

-POWERED HOIST WITH WALL PLUG - 120v AC 60 Hz

-MINIMUM HOOK HEIGHT: 17' 1.5"

-MINIMUM LOAD CLEARANCE HEIGHT: 15' 0.5"

-MINIMUM PINCH POINT BETWEEN THE SUPPORT BEAMS: 10’

-VARIABLE SPEED

-MAXIMUM CREEP SPEED: 1.75' PER MINUTE

-HOOK MUST HAVE ABILITY TO REACH FLOOR

Update #1 · Dec 12, 2025