Market Research / Sources Sought - Type IV Polymeric Piles
Open Pre-Solicitation Posted
- Solicitation number
- N6274227RT4PP
- Agency
-
Naval Facilities Engineering Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 326199 All Other Plastics Product Manufacturing
- Place of performance
- Guam, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NAVFAC Pacific intends to use a brand-name product, conducting market research under FAR Part 10 to identify manufacturers of type IV polymeric piles with equal performance and listing/approval requirements to those manufactured by Tangent Technologies, LLC; responses are due December 2, 2027. The Set Aside line reads "No Set-Aside Used." Responses from third-party distributors, pass-through resellers, or supply brokers that do not directly own the production line or manufacturing rights to a qualified equivalent will not be considered responsive.
The piles support FY27 MCON Project P-676 Polaris Point Submarine Pier at Naval Base Guam. Required salient characteristics include a 16-inch outer diameter (+/- 5 percent), allowable moment capacity of 278 kip-feet and allowable shear capacity of 45.0 kip (both per ASTM D7258), and flexural modulus (EI) of 2.7x10^9 lb-in² (+/- 10 percent, ASTM D6109). The notice applies a factor of safety of 2.0 to convert allowable flexure to ultimate and 3.0 for shear. Physical requirements include specific gravity of 63 pounds per cubic foot (+/- 5 percent, ASTM D792), skin density of 60 pounds per cubic foot, core density of 48 pounds per cubic foot, water absorption below 0.1 percent at 24 hours (ASTM D570), no break under ASTM D746, Shore D hardness of 60 (+/- 10 percent, ASTM D2240), no hardness change after 500 hours of UV exposure (ASTM D4329), flame spread below 200 (ASTM E84), and abrasion resistance below 0.5 g (ASTM D4060). If the pile material reacts to seawater, the notice permits an alternative furnished with an HDPE sleeve encasement or abrasion-resistant polymer.
The notice lists NAICS 326199 and PSC 5675. It identifies no quantity, period of performance, award value, or incumbent contractor.
Notice text
Notice of intent to use a brand name product. The Naval Facilities Engineering Systems Command, Pacific (NAVFAC Pacific) is conducting market research in accordance with FAR Part 10 to identify potential manufacturers capable of producing type IV polymeric piles that have equal performance and listing/approval requirements as the type IV polymeric piles that are manufactured by Tangent Technologies, LLC. Responses from third-party distributors, pass through resellers, or supply brokers who do not directly own the production line or manufacturing rights to a qualified equivalent product will not be considered responsive to this market survey.
FY27 MCON Project P-676 Polaris Point Submarine Pier, located Naval Base Guam requires type IV polymeric piles that demonstrate the following salient characteristics:
Performance Characteristics:
- Structural Outer Dimensions/Diameter: 16 inch, N/A, +/- 5 percent
- Allowable Moment Capacity *: 278 kip – feet, ASTM D7258
- Flexural Modulus (EI): 2.7x109 lb-in2, ASTM D6109, +/- 10 percent
- Allowable Shear Capacity *: 45.0 kip, ASTM D7258
* A factor of safety of 2.0 is used to convert allowable to ultimate for flexure and 3.0 used to convert allowable to ultimate for shear.
Physical Properties:
- Specific Gravity: ASTM D792, 63 pounds per cubic foot +/- 5 percent.
- Pile Skin Density: ASTM D792, 60 pounds per cubic foot +/- 5 percent.
- Pile Core Density: ASTM D792, 48 pounds per cubic foot +/- 5 percent.
- Water Absorption: ASTM D570, less than 0.1 percent at 24 hours.
- Brittleness: ASTM D746, no break.
- Hardness (Shore D): ASTM D2240, 60 +/- 10 percent.
- Ultraviolet Effect on Hardness: ASTM D4329, no change after 500 hours of exposure.
- Flame Spread Rating: ASTM E84, less than 200.
- Abrasion Resistance: ASTM D4060, less than 0.5g. If the pile material is reactive to seawater, alternative can be provided where the pile is furnished with an HDPE sleeve encasement or abrasion resistance polymer, with a minimum thickness of ½ inch.
This is not a request for proposals, quotes, or an invitation for bid. The intent of this notice is to identify potential alternative type IV polymeric piles that will satisfy agency requirements. To be considered, please submit detailed technical data in order for the Government to conduct a comprehensive evaluation of your product to ensure compatibility with the existing system. In accordance with FAR 15.101(c)(2), a response to this notice is not an offer and cannot be accepted by the Government to form a binding contract. The responder is solely responsible for the information it submits and any associated costs. The Government reserves the right to disregard any submittal that is incomplete or vague. Please do not submit company brochures. Please submit complete information via email to Ms. Michelle Gopwani-Lee via electronic mail at michelle.m.gopwani-lee.civ@us.navy.mil no later than 02 December 2026 at 12:30 p.m. H.S.T. Information received after the due date/time will not be considered. Any information provided to the Government in response to this RFI will become U.S. Government property and will not be returned. All proprietary or classified information will be treated appropriately.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Market Research / Sources Sought – Engineered Cable Support Systems | Naval Facilities Engineering Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity