Maintenance Dredging of New York and New Jersey Channels - Ward Point Bend, NY&NJ Federal Navigation Project

Closed Pre-Solicitation Posted

Solicitation number
W912DS-18-B-0010
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Contract number
W912DS18C0011 Federal contract award
Awardee
Donjon Marine Co., LLC
NAICS code
237990 Other Heavy and Civil Engineering Construction
PSC
Not on record
Place of performance
New York and New Jersey Channels, Ward Point Bend, United States

Notice details come from SAM.gov. Updated .

Notice text

The New York District of the U.S. Army Corps of Engineers (USACE) proposes to perform maintenance dredging of portions of the New York and New Jersey Channels, Ward Point Bend, NY & NJ Federal Navigation Project. The dredged material would be placed at the Historic Area Remediation Site (HARS), 5 miles east of Sandy Hook, New Jersey. The proposed maintenance dredging would remove approximately 200,000 cubic yards (CY) of selected critical shoals from the Ward Point Bend Reaches of New York and New Jersey Channels. Dredging in these channels would be required to a depth of -35 feet Mean Lower Low Water (MLLW) plus 2 foot allowable overdepth. The dredged material is expected to consist primarily of silt, sand and clay.



Due to expected restrictions in the Water Quality Certificate, the proposed work will likely require using a mechanical dredge with a clamshell environmental bucket. Additional, multiple ocean-going barges and tug boats will be needed to perform the work during the dredging, transportation, and placement operations. The dredged material will be required to meet all federal, state, and local criteria of the government agencies with jurisdiction at the dredging and placement sites.



Once the contract is awarded, the contractor will be required to commence work within five (5) calendar days after receipt of the Notice to Proceed. The contractor is required to maintain a production rate of at least 8,000 cubic yards per calendar day for the dredging, transportation, and final placement of the material. The presence of dredging equipment in the channel will impact ship traffic and it is necessary to maintain this production rate while minimizing the duration of this impact. There are no options to the contract.


The work is estimated to cost between $1,000,000 and $5,000,000. It is the intention of the government to award in August 2018 and the proposed work is anticipated to take place between August and December 2018.


Liquidated damages of $1,770.00 per calendar day of delay will be assessed to the contractor until all work under the contract is accepted as complete.


The Plans and Specifications will be posted electronically via the Federal Business Opportunities website at www.fbo.gov. Any and all amendments shall be likewise posted. Hard copies will not be available. It is the contractor's responsibility to monitor the FedBizOpps website for the Plans and Specs, and any amendments. Bidders are required to be registered in the System for Award Management (SAM) www.sam.gov. Award will be made to the lowest responsible bidder.


The bid opening will be held at 26 Federal Plaza, New York, NY; the exact location will be included in the solicitation. All questions must be submitted in writing via email, to the POC indicated herein. The media selected for issuance of Synopsis/Solicitation and amendments shall solely be at the discretion of the Government; accordingly, the media utilized for this project shall be the internet. Telephone, email or fax requests for the solicitation will not be accepted or honored. Paper copies of this solicitation and amendments, if any, will not be available or issued. Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the solicitation is issued. Interested parties may download and print the solicitation at no charge from the Federal Business Opportunities (FedBizOpps) website, https://www.fbo.gov.


All vendors who want access to the solicitation must be registered in the System for Award Management (SAM) located at www.sam.gov, and FedBizOpps. To keep informed of changes, check https://www.fbo.gov frequently. Some contractor tools are as follows; 1. Register to receive notification, and 2. Subscribe to the mailing list for specific solicitation at FedBizOpps https://www.fbo.gov. A hyperlink posted in FedBizOpps will direct vendors to FedBizOpps to download solicitations, plans, specification and amendments. Project specification files and drawings are portable document files (PDF). Prospective contractors must be registered in www.sam.gov prior to award. Lack of registration in SAM will make an offeror ineligible to download the solicitation for award.


This is an unrestricted procurement.


 


 



 



Files

File Type Posted
W912DS18B0010_Abstract.pdf PDF
Amendment_0001_NYSDEC_Permit.pdf PDF
Amendment_0001.pdf PDF
W912DS-18-B-0010_Solicitation.pdf PDF
W912DS-18-B-0010_Technical_Specs.pdf PDF
W912DS-18-B-0010_Contract_Plans.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors