M65 Shop Cabinet upgrade
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- 20255PR240000299
- Agency
- Coast Guard Department of Homeland Security
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 337214 Office Furniture (except Wood) Manufacturing
- Place of performance
- Kapolei, Hawaii 96707, United States
- Points of contact
-
- Justin Hinkle justin.n.hinkle@uscg.mil (808) 842-2822
- Statten Swanner stratten.s.swanner@uscg.mil (808) 628-2643
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard is seeking to procure an M65 Shop Cabinet Upgrade at their Air Station Barbers Point facility. The required goods and services include modular cabinets and toolboxes, with specific requirements such as tall two-door cabinets with shelving, rolling toolboxes, under-cabinet lighting, and multiple power outlets to support test equipment. The cabinets must be black aluminum for corrosion resistance and have locking mechanisms. Key evaluation criteria include compliance with the detailed technical specifications. The response is due by September 11, 2024.
This is an unrestricted solicitation, not set aside for any socioeconomic programs. The place of performance is Kapolei, HI, with the items to be delivered to Tukwila, WA. The contracting officer is Justin Hinkle, and interested parties should contact Stratten Swanner for additional design build requirements. The budget or award value is not specified in the provided documents.
Notice text
ASBP MH65 Engine Shop Upgrade Requirements
Required
- Cabinets and toolboxes must be modular
- Upper cabinets must not attach to any walls (self-contained)
- Two of the cabinets must be tall two door with shelving
- There must be three toolboxes
- Two of the smaller toolboxes must be rolling and have the ability to be stored within the cabinet system.
- Any upper cabinets must have the ability to have under cabinet lighting
- All 3 wall units must have multiple power outlets to facilitate test equipment
- On the larger system, there must be a cabinet for hose reels
- The system must include a sink as per shop requirements
- There must be an additional four short cabinets for mounting on an upper shelf for test equipment storage
- Cabinets must be black with black hardware
- Cabinets must be aluminum for maximum corrosion prevention
- Toolboxes must have a locking mechanism
- Drawers must not have individual drawers stops that are not apart of the drawer pulls. Either the drawer pull themselves must pull up to allow for drawer movement or the unlocking mechanism is attached the pull itself (underneath is preferred).
- There must be a double stacked drawer cabinet for parts storage
- All of the bottom cabinets (other than the two tall and double stacking parts storage) must be the same height for facilitating long cabinets tops (butcher block or composite)
attached dimensions drawing of the shop these will be installed in.
The cabinets that will be mounted on the shelving system will go above the sink wall, please include the same cabinets that are on the sink wall for the shelving as well.
for build design, please contact:
Stratten Swanner (501) 472-6241 Stratten.S.Swanner@uscg.mil
Contracting Officer: Justin Hinkle (808) 842-2822 justin.n.hinkle@uscg.mil
Place of delivery: Attn:Z20255, 443 South 134th place, Tukwila WA 98168
Attachments
| File | Type | Posted |
|---|---|---|
| ASBP MH65 Engine Shop Upgrade Requirements.docx | DOCX document | |
| Engine Shop Dimensions.jpg | JPG image | |
| Combined Synopsis Notice.docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| M65 Shop Cabinet upgrade | Award Notice | |
| M65 Shop Cabinet upgrade | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity