ASBP MH65 Engine Shop Upgrade Requirements.docx
DOCX document 20 KB Posted
- Attached to
- M65 Shop Cabinet upgrade Federal contract opportunity
- Solicitation number
- 20255PR240000299
About this file
This document is a set of requirements for an ASBP MH65 Engine Shop Upgrade project. The key details are:
The required upgrades include modular cabinets and toolboxes, with upper cabinets that are self-contained (not attached to walls). Two of the cabinets must be tall two-door units with shelving, and there must be three toolboxes, two of which must be rolling and able to be stored within the cabinet system. The cabinets must have under-cabinet lighting capability and multiple power outlets to support test equipment. Additional requirements include a sink, four short cabinets for test equipment storage, black aluminum cabinets with black hardware for corrosion resistance, locking toolboxes, and a double-stacked drawer cabinet for parts storage. All bottom cabinets, except the tall units and parts storage, must be the same height to accommodate long countertops.
The related federal contract opportunity is Solicitation Number 20255PR240000299 for the "M65 Shop Cabinet Upgrade" project, to be delivered to the US Coast Guard in Tukwila, WA. The contracting officer is Justin Hinkle, and the technical point of contact is Stratten Swanner.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Engine Shop Dimensions.jpg | JPG image | |
| Combined Synopsis Notice.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ASBP MH65 Engine Shop Upgrade Requirements
Required
· Cabinets and toolboxes must be modular
· Upper cabinets must not attach to any walls (self-contained)
· Two of the cabinets must be tall two door with shelving
· There must be three toolboxes
· Two of the smaller toolboxes must be rolling and have the ability to be stored within the cabinet system.
· Any upper cabinets must have the ability to have under cabinet lighting
· All 3 wall units must have multiple power outlets to facilitate test equipment
· On the larger system, there must be a cabinet for hose reels
· The system must include a sink as per shop requirements
· There must be an additional four short cabinets for mounting on an upper shelf for test equipment storage
· Cabinets must be black with black hardware
· Cabinets must be aluminum for maximum corrosion prevention
· Toolboxes must have a locking mechanism
· Drawers must not have individual drawers stops that are not apart of the drawer pulls. Either the drawer pull themselves must pull up to allow for drawer movement or the unlocking mechanism is attached the pull itself (underneath is preferred).
· There must be a double stacked drawer cabinet for parts storage
· All of the bottom cabinets (other than the two tall and double stacking parts storage) must be the same height for facilitating long cabinets tops (butcher block or composite) attached dimensions drawing of the shop these will be installed in.
The cabinets that will be mounted on the shelving system will go above the sink wall, please include the same cabinets that are on the sink wall for the shelving as well.
File details come from the government source that posted it. Updated .