Low Size, Weight, and Power, High Flux Atomic Source for Scalable Manufacturing
Closed Solicitation Posted
- Solicitation number
- SF24A-T006
- Agency
-
Air Force Research Laboratory
Air Force Materiel Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Air Force Materiel Command Research Laboratory, known as the Air Force Research Laboratory (AFRL), seeks low size, weight, and power (SWaP) high-flux thermal atom beam sources for scalable manufacturing under DoD STTR topic SF24A-T006. The procurement is a Total Small Business set-aside, and its response deadline of February 21, 2024 has passed as of November 17, 2026.
The solicitation targets sources with a high-brightness atomic flux density above 10^10 atoms per second per 10,000 square micrometers of cross-sectional area, a minimum total flux above 10^10 atoms per second, and a transverse velocity distribution width no greater than 5 meters per second. Sources must be compatible with mass-production techniques and preferably with established chip-alignment processes, and should use no lasers or very simple laser configurations. Devices must achieve the metrics within a total volume of 250 microliters, with a viable path to a total device volume of 100 microliters. Preference goes to sources that also control longitudinal velocity. Intended applications are atomic sensing, atomic clocks, and other quantum devices of interest to the Department of Defense. The topic is classified as ITAR: No.
The Statement of Objectives describes three phases. Phase I develops plans and concepts showing how the metrics will be met while satisfying SWaP requirements, including a pathway to low-cost, scalable production. Phase II instantiates and demonstrates a functioning prototype, conducts performance testing, and develops customer contacts and transition plans. Phase III matures prototypes for integration into full quantum systems with prospective transition partners.
The NAICS code is 541715, Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology). The PSC is AC12, National Defense R&D Services, Department of Defense, Military, Applied Research.
Notice text
DoD STTR topic SF24A-T006
Component: USAF
Command: AFRL-RV
Phase: STTR Phase I
Technology Areas: Sensors
Focus Areas: Quantum Science
Keywords: <p>low SWaP atom sources; scalable atom sources; atom beam sources; high flux atom sources</p>
ITAR: No
Objective:
Develop thermal atom beam sources with a high-brightness atomic flux density (greater than 10^10 atoms/second per 10,000 micrometer-squared cross sectional area) with a minimum total flux greater than 10^10 atoms/second and suitable for atomic sensing, atomic clocks, or other quantum devices of interest to the Department of Defense. The atom source should be compatible with mass-production techniques with preference being given to devices that can be integrated with established chip-alignment processes and procedures. The atomic sources should focus on simplicity and should use either no lasers or very simple laser configurations. The width of the transverse velocity distribution of the atoms emitting from the source should be no greater than 5 meters/second. Atomic beam sources developed under this topic should achieve the aggressive flux and velocity metrics within a total volume of 250 microliters with a viable path to achieve all metrics within a total device volume of 100 microliters. Preference will be given to sources that are able to reduce and control the longitudinal velocity as well as the transverse velocity.
Description:
Atom-based sensors and clocks have shown tremendous promise in laboratory based experiments. In addition, atom-based quantum information processing nodes are likely to be necessary for short term quantum memory storage and transduction between different quantum systems. For clocks and sensors, the signal to noise ratio is typically improved in these devices by using laser cooling to produce a narrow velocity distribution that is within the Doppler width of the atoms or the linewidth of the laser. Using lasers for cooling is a well established technique but often increases the size and complexity of the device due to optical constraints. Several types of past and present atomic devices have avoided laser complexity by using filtered thermal atomic beams as the basis of atomic clocks and inertial sensors. For future atomic sensors that have low size, weight, and power (SWaP) that maintain high performance there needs to be a low-complexity, very compact atomic source with a well defined and narrow velocity range that uses no lasers, or greatly reduced laser paths, to produce a high brightness atomic flux. Ideally, this device will be suited for scalable manufacturing or fabrication techniques and could be compatible to integrate with established chip alignment processes. The device should produce greater than 10^10 atoms/second with a transverse velocity width less than 5 meters/second. The total size should 100 microliters including heaters and vacuum enclosure. Preference will be given to sources that are able to control the longitudinal velocity as well as the transverse velocity.
Phase I:
Develop necessary plans and concepts to create a high-flux atomic source suitable for atomic sensing, atomic clocks, or other quantum devices while meeting performance metrics highlighted in the objectives of this topic. The designs and concepts should clearly identify how the required performance metrics will be met while simultaneously meeting the required Size, Weight and Power metrics. The plans and concepts should include a clear and convincing pathway towards low-cost, scalable production. This plans should also conceptualize how the atomic source designs could provide advantage over state of the art for a relevant atomic device, such as an atomic inertial sensor, compact atomic clock, or other quantum information processing device.
Phase II:
Instantiate and demonstrate a functioning prototype meeting the required specifications as described in the topic objectives and as represented by finalized plans and concepts initially developed in Phase I. Perform experiments and analyze results to establish the performance of the device and compare versus the desired topic objectives and demonstrate the adequacy of the device concepts. Demonstrate the feasibility of low-cost, scalable production of the high-flux atom devices still capable of achieving all performance specs identified in the objectives. Develop contacts with potential customers and develop a transition plan supporting future Phase III activity. Provide regular communication to the government sponsor to demonstrate progress and to ensure government understanding of risk mitigation.
Phase III:
Mature the prototype technologies developed in Phase II to include ease of integration into full quantum devices. It is anticipated that the devices developed under this effort would be geared towards integration into low Size, Weight, and Power thermal-beam sensors, such as those being developed by the Defense Innovation Unit and the Office of the Under Secretary of Defense for Research and Engineering (OUSD R&E). Phase III efforts should focus on integration into full-quantum systems with prospective transition partners. The contractor will transition the solution for very low Size, Weight, and Power, highly scalable atom sources to a broad range of government and civilian users.
Files
| File | Type | Posted |
|---|---|---|
| SF24A-T006.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Low SWaP, 2-micron Fiber Amplifiers | Air Force Materiel Command | Total Small Business | |
| High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing | Air Force Materiel Command | Total Small Business | |
| Wafer-scale low-loss hyperbolic optical material | Office of the Secretary of Defense | Total Small Business | |
| Quantum Sensing Analyzer | Air Force Materiel Command | Total Small Business | |
| Reusable Illumination System | Air Force Materiel Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity