Linkblet Crane Repairs

Closed Special Notice Posted

Solicitation number
W912EE26QA0028
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Place of performance
Vicksburg, Mississippi 39183, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The U.S. Army Corps of Engineers Vicksburg District intends to award a sole-source service contract to Mid South Machinery Inc. for repairs to a Linkbelt 138 Hylab 5 lattice boom crane, with repairs required no later than 17 July 2026. The Revetment Branch requires computer restoration, cab repairs including new ball joints and door seals, seat assembly replacement, lattice member replacement and welding, cable lubrication, annual inspection, and installation of specified replacement parts. The crane is located at 2577 Haining Road, Vicksburg, Mississippi 39183. Although this is not a formal RFQ, any firm or individual believing it can meet the stated requirements may submit a capabilities statement by 12:00 PM CST on 26 June 2026 for consideration. Responses must be submitted by email. The procurement is conducted under FAR Part 12 commercial products and services authority.

Notice text

**W912EE**

The U.S. Army Corps of Engineers - Vicksburg District (USACE-MVK), in accordance with Federal Acquisition Regulation (FAR) Part 12 Acquisition of Commercial Products and Commercial Services, intends to award a sole source service contract to Mid South Machinery Inc. (CAGE Code: 028E4) for the repair of a Linkbelt Crane. The Revetment Branch of the USACE Vicksburg District requires repairs to be completed on a Linkbelt 138 Hylab 5 lattice boom crane no later than 17 July 2026. The crane is located at 2577 Haining Rd, Vicksburg, MS, 39183.  The specific repairs needed are listed in the requirement list below:

Requirements

  • Model: Linkbelt 138 Hylab 5
  • Serial Number: N9J5-7563
  • Repair computer
    • Remove SML10 computer
    • Have it repaired by factory to restore to full functionality to unit/screen
    • Reinstall repaired computer
    • Calibrate computer
  • Install new spring on boom hoist paw
  • Cab repairs
    • Remove old ball joints on cab door
    • Install new ball joints
    • Adjust door as needed
    • Remove old door seal
    • Install new door seal in cab
    • Remove old seat assembly
    • Install new seat assembly
  • Attach new safety decal on the boom
  • Utilize certified welder to remove two bent lattice members and replace with two new  lattice members
  • Paint lattice
  • Lube main and auxiliary hoist cables
  • Perform annual crane inspection and apply inspection sticker to crane
  • Replace the following:
    • Ball Joint – 6 each – Part # 3099966
    • Spring – 1 each – Part # CDJ3725
    • Warning Label – 10 each – 1M 6095
    • Seat assembly – 1 each – Part # 3104090
    • Bolt – 4 each – Part # CXN0162
    • Sponge Trim – 1 each – Part # EQF0003
    • HRS angle – 48 each – Part # 902008001

This is not a Request for Quote (RFQ), and no solicitation is available for this procurement. Nevertheless, any firm or individual that believes it can meet the Vicksburg District’s requirements described herein may submit a capabilities statement, which, if received by 12:00 PM CST on 26 June 2026, will be considered.  Responses to this posting must be submitted via e-mail, no phone calls will be accepted. A determination not to compete this purchase based upon responses to this notice is solely within the discretion of the Federal Government. Any questions or comments should be directed to Afton Riles, Afton.Riles@usace.army.mil.

Similar open opportunities

Opportunity Agency Set-aside Responses due
Crane LMI System, Barge Integration and Components Installation NAICS 333120 ENDIST St Paul Total Small Business
Garrison trash rack modification crane rental Riverdale, North Dakota 58565, United States · NAICS 238990 ENDIST Omaha Total Small Business
Repair/Replace Overhead Cranes on Fort Drum Fort Drum, New York 13602, United States · NAICS 811310 MICC Fort Drum Total Small Business
Low Level Cranes- CSO Anniston, Alabama 36201, United States · NAICS 333923 ACC Warren No set-aside
Gantry Crane United States · NAICS 333923 Naval Air Warfare Center No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity