Lightweight Optical Components for High Energy Laser System

Closed Solicitation Posted

Solicitation number
A19-088
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A19-088

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Ground Sea

Keywords: Optical Components; additive manufacturing; high energy lasers; beam control

Objective:

Develop a process for manufacturing large lightweight optical components for High Energy Laser (HEL) applications.

Description:

In order to integrate HEL weapons onto Size, Weight, and Power (SWaP) constrained platforms, alternate lighter weight materials and improved manufacturing processes are required. Optical components required for a HEL weapon system such as primary and secondary telescope optics, fast steering mirror flats, and other mirrors require precision polishing for high power coatings. The manufacturing process for materials currently used is very tedious and the materials are typically heavy.

This solicitation is looking for improved methods of manufacturing optical components with lighter weight materials. Possible solutions may include, but are not limited to, additive manufacturing form fit focusing and diverging components before polishing, innovative polishing techniques, and improved materials. The coefficient of thermal expansion shall be a main consideration in material selection because irradiance values on the order of 500 watts per square centimeter on a primary mirror of roughly 30 cm in diameter, and 5 kilowatts per square centimeter on smaller optical elements 6-10 cm in diameter are to be expected. The optical material and polishing technique shall be capable of meeting specifications required for IBS or e-Beam coatings.

Phase I:

The phase I effort shall include analysis and concept design of the proposed manufacturing technique. The concept design and analysis in phase I shall be detailed enough to justify a proof of concept. Expected thermal expansion parameters, polishing surface quality, and coating expectations shall be addressed.

Phase II:

During phase II, the phase I designs will be utilized to fabricate, test and evaluate a large optical component such as a 30 cm primary telescope and a small optical component on the order of 6-8 cm in diameter. The final prototype will be thoroughly tested in a laboratory environment to fully characterize the performance of the final system.

Phase III:

The phase III effort will be to design, build and integrate optical components into a HEL system. The US Army Space and Missile Defense Technical Center as part of its Directed Energy research would execute military funding for this Phase III effort. The contractor will work with the government to integrate the optical components into one of the Army’s high energy laser demonstrators or testbeds for evaluation.

Files

File Type Posted
A19-088.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors