Lightweight Nanosatellite Deployable Array
Closed Solicitation Posted
- Solicitation number
- A09-120
- Agency
-
Space and Missile Defense Command
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic A09-120
Component: ARMY
Command: SMDC
Phase: SBIR Program Phase I Action
Technology Areas: Sensors; Space Platforms
Keywords: deployable array; planar array; solar array; lightweight array; deployable antenna; aperture; nanosatellite; nanosat; microsatellite; microsat; responsive space
Objective:
Develop lightweight nanosatellite deployable arrays.
Description:
The Operationally Responsive Space (ORS) program has been developed to meet the space-related urgent needs of the warfighter in a timely manner. The ORS operational concept calls for ORS satellites to augment or reconstitute existing "big space” systems. However, to be operationally responsive, i.e., timely, ORS space systems must be launched on relatively small launch vehicles with limited payload weights. With current technologies, smaller ORS-class satellites necessarily require smaller components which often translate into lower capabilities than their "big space” counterparts. Additionally, smaller ORS-class launch vehicles are limited to placing payloads into low earth orbit (LEO) or lower highly elliptical orbit (HEO). Some booster concepts under consideration for future use as responsive launchers may only lift satellites weighing 10kg (22 lbs) or less (i.e., nanosatellites).
Nanosatellites with masses on the order of 10 kg (22 lbs) or less are receiving an increasing level of attention within the national security community. However, the small dimensions of these satellites currently limit the size and therefore performance of subsystems that depend on array-type structures. For example, small, body-mounted nanosatellite solar arrays create undesirable power constraints and nanosatellite antenna size limitations necessarily lead to low antenna gains. Although some research has already been done on lightweight space deployable structures for the larger satellite classes, little has been done in the nanosatellite class (1-10 kg). A key area of need for tactically relevant military nanosatellites is an innovative mechanism to serve as a frame for deployable solar arrays, deployable phased array or conventional RF antennas for communications, or arrays for synthetic aperture radar applications (i.e., array structures for subsystems that benefit from larger surface areas). The mechanism, accounting for any solar panels or antenna attached to it, must be compact as well as lightweight so that overall satellite and launch vehicle mass and volume constraints are not exceeded. Deployable planar arrays, or other innovative types of arrays such as deployable reflector antenna structures, could significantly enhance the functionality of nanosatellites for warfighters.
Researchers into lightweight nanosatellite deployable array innovations should take several issues under consideration, including: • Deployable array mechanism (including attached solar arrays or antennas) mass light enough to be part of an overall satellite with a total mass of 10kg (22 lbs) • Deployable array mechanism (including attached solar arrays or antennas) undeployed volume compact enough for typical nanosatellite launch vehicle payload volumes (32 in. x 20 in. x 20 in.) • Technological risk and reliability. • On-orbit deployment reliability. • Deployabilty/functionality/performance in regimes from circular Low Earth Orbit at 160 km (100 mi) to HEO apogees of 4000+ km (2500+ mi). • The LEO/HEO space environment, including effects of atomic oxygen, radiation and solar wind. • An on-orbit design life of 1-3+ years. • Shelf life.
Phase I:
Conduct feasibility studies, technical analysis and simulation, and small scale proof of concept demonstrations of proposed lightweight nanosatellite deployable array innovations. Develop an initial conceptual approach to incorporating solar panels or RF communications/SAR antennas onto a nanosatellite-sized deployable array mechanism and include system estimates for mass, volume, power requirements, and duty cycles.
Phase II:
Implement technology assessed in Phase I effort. The Phase II effort should include initial lightweight nanosatellite deployable array designs, mock-ups, and, if possible, a launch-ready prototype ready to integrate into a nanosatellite bus. Initial technical feasibility shall be demonstrated, including a demonstration of key subsystem (solar array or RF/SAR antenna) phenomena. The goal should be Technology Readiness Level 4, with component and/or breadboard verification in laboratory environment.
Phase III:
The contractor shall finalize technology development of the proposed lightweight nanosatellite deployable array and begin commercialization of the product. In addition to military communications or intelligence, surveillance and reconnaissance (ISR) missions, commercial civilian applications for a lightweight nanosatellite deployable array could include space-based satellite communications or remote sensing (SAR). Phase III should solidly validate the notion of lightweight nanosatellite deployable arrays with a low level of technological risk. The goal for full commercialization should ideally be Technology Readiness Level 9, with the actual system proven through successful mission operations. Specifically, Phase III should ultimately produce lightweight nanosatellite deployable arrays suitable for nanosatellites applications, i.e., with a total satellite weight of only ten kilograms, yet having capabilities comparable with larger satellites weighing hundreds or thousands of kilograms. The contractor must also consider manufacturing processes in accordance with the president’s Executive Order on “Encouraging Innovation in Manufacturing” to insure that the lightweight systems developed under this SBIR can be readily manufactured and packaged for launch and on-orbit operability. While initial (Phase I and II) sponsorship and funding may come from Army Space and Missile Defense Command, during Phase III that support could conceivably transition or expand to the appropriate division of the Army Program Executive Office for Missiles and Space (PEO M&S) upon full rate production and deployment. PEO M&S could maintain a stockpile of lightweight nanosatellite deployable arrays ready to mate to nanosatellite buses, which when launched responsively could meet urgent warfighter needs. Simultaneously, commercial versions of the deployable array could be produced for civilian and scientific applications. Universities could use the deployable arrays in research or student project nanosatellites. Commercial satellite manufacturers could incorporate lightweight nanosatellite deployable arrays into a variety of commercial nanosatellites for sale of complete units to various interested customers. Commercial companies could also provide competitively priced nanosatellite-based communications or remote sensing services to paying customers, including the national security community. PRIVATE SECTOR COMMERCIAL POTENTIAL: There is a perceived potential for commercialization of this technology. The primary customer for the proposed technology will initially be the Department of Defense, but there could also be other applications in the areas of commercial satellite communications or space-based remote sensing (e.g., SAR imagery).
Files
| File | Type | Posted |
|---|---|---|
| A09-120.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity