Lightweight Nanosatellite Constellation Communications System
Closed Solicitation Posted
- Solicitation number
- A11-057
- Agency
-
Space and Missile Defense Command
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic A11-057
Component: ARMY
Command: SMDC
Phase: SBIR Program Phase I Action
Technology Areas: Electronics; Information Systems; Sensors; Space Platforms
Keywords: LASERcom; nanosatellite; nanosat; microsatellite; microsat; responsive space
Objective:
Develop a Lightweight Nanosatellite Communications subsystem based on LASER communications to enable high bandwidth spacecraft to spacecraft communications in a small size.
Description:
The US ARMY Space & Missile Defense Responsive Space (SMDRS) program has been developed to meet the space-related urgent needs of the warfighter such as battlespace awareness and battle command in order to improve the observation and collection of information worldwide, the command and control of battlespace awareness assets, and communication in the combined/joint environment. The payloads that nanosatellites would carry to enable these capabilities would be Intelligence, Surveillance, and Reconnaissance (ISR) sensors and communications transceivers. These satellites would be launched into inclined low earth orbits (LEO) and operate for a period of six months to two years. The earliest classes of these satellites would be approximately 3 kg and conform to the "3U” cubesat form factor, with possible expansion to larger spacecraft later as new deployment concepts are developed.
A key area of need for these nanosatellites is a low-mass, low-volume solid state LASER Communications subsystem that would provide communications between nanosatellites and possibly to the ground. It is anticipated that a constellation of LEO nanosatellites would need to communicate large amounts of data from on-board sensors between each other and to the ground since only a few may be in view of ground stations at a time. In order to provide this capability to a nanosatellite, current LASER communications systems would have to be significantly reduced in size, weight and power utilization in order to accomplish these objectives.
It is also anticipated that the earliest classes of these nanosatellites would be launched as secondary payloads in the P-POD structure. These opportunities imply that reliability and the success of the primary payload is paramount, so nanosatellite communications systems based only on solid state LASER technologies shall be considered at this time.
The objective of this research is to create an experimental solid state nanosatellite LASER communications subsystem that has the following features:
Currently Nanosatellites can generate 10 to 20W of on orbit average power. Current pointing systems have a steady-state error of 0.15%. Current optical inter-satellite links achieve single-wavelength data transmission at 2.5 Gbps and high-precision tracking of 0.001 deg or less. There are no equivalent size laser communication packages with these parameters. Development of this system would advance the state of the art in size reduction, power consumption, and pointing accuracy of current laser communication systems.
• Has a total mass of less than 15% of the available mass, e.g., roughly 0.5kg of a 3U form factor, including reaction mass and control system; • Fits within less than 15% of the available volume (assume an overall nanosatellite volume of 10cm X 10cm X 30cm); • Have the pointing accuracy to communicate with fore and aft satellites based upon an SMDC-ONE nanosatellite in a simple 10-20 satellite ring constellation; • Provide intersatellite communication data rates up to 2 Gbps per second; • Power consumption should have a peak no greater than 10 Watts with a duty cycle of no more that 10 Watts for 10 minutes; • Provides an in-orbit minimum design life of 1 year.
Phase I:
Conduct feasibility studies, technical analysis and simulation, and small scale proof of concept demonstrations of proposed lightweight nanosatellite LASER Communications innovations. Develop an initial conceptual approach to incorporating a LASER Communications system onto a nanosatellite and include system estimates for mass, volume, power requirements, and duty cycles. Deliverables should include monthly status reports, feasibility demonstration reports and any hardware produced.
Phase II:
Implement technology assessed in Phase I effort. The Phase II effort should include initial lightweight nanosatellite LASER communications designs, mock-ups, and, if possible, a launch-ready prototype ready to integrate into a nanosatellite bus. Initial technical feasibility shall be demonstrated, including a demonstration of key subsystem phenomena. Deliverables should include quarterly status reports, design documentation and any hardware produced.
Phase III:
The contractor shall finalize technology development of the proposed lightweight nanosatellite LASER Communications system and begin commercialization of the product. In addition to military communications or intelligence, surveillance and reconnaissance (ISR) missions, commercial civilian applications for a lightweight nanosatellite LASER communications subsystem could include space-based satellite communications. Phase III should solidly validate the notion of lightweight nanosatellite LASER Communications with a low level of technological risk. The goal for full commercialization should ideally be Technology Readiness Level 9, with the actual system proven through successful mission operations. Specifically, Phase III should ultimately produce lightweight nanosatellite LASER Communications suitable for nanosatellites applications, i.e., with a total satellite weight of less than ten kilograms, yet having capabilities comparable with larger satellites weighing hundreds or thousands of kilograms. The contractor must also consider manufacturing processes in accordance with the president’s Executive Order on “Encouraging Innovation in Manufacturing” to insure that the lightweight systems developed under this SBIR can be readily manufactured and packaged for launch and on-orbit operability. While initial (Phase I and II) sponsorship and funding may come from Army Space and Missile Defense Command, during Phase III that support could conceivably transition or expand to the appropriate division of the Army Program Executive Office for Missiles and Space (PEO M&S) upon full rate production and deployment. PEO M&S could maintain a stockpile of lightweight nanosatellite LASER Communications subsystems ready to mate to nanosatellite buses, which when launched responsively could meet urgent warfighter needs. Simultaneously, commercial versions of the Nanosat LASER Communications could be produced for civilian and scientific applications. Commercial satellite manufacturers could incorporate lightweight nanosatellite LASER Communications into a variety of commercial nanosatellites for sale of complete units to various interested customers. Commercial companies could also provide competitively priced nanosatellite-based communications or remote sensing services to paying customers, including the national security community.
PRIVATE SECTOR COMMERCIAL POTENTIAL: There is a perceived potential for commercialization of this technology. The primary customer for the proposed technology will initially be the Department of Defense, but there could also be other applications in the areas of commercial satellite communications.
Files
| File | Type | Posted |
|---|---|---|
| A11-057.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity