LD5A Link-Belt Annual Inspection
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912ES25Q0014
- Agency
- ENDIST St Paul US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333923 Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Place of performance
- Fountain City, Wisconsin 54629, United States
- Points of contact
-
- Roberta Just roberta.l.just@usace.army.mil (651) 290-5375
- Sharon M. Frank-Scheierl sharon.m.frank-scheierl@usace.army.mil (651) 290-0518
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation is for the annual inspection of a mobile crane located at Lock and Dam 5a in Fountain City, Wisconsin. The Department of the Army Corps of Engineers Engineering District St Paul is seeking a contractor to functionally test the hydraulic, mechanical, and electrical systems of the crane, as well as disassemble and inspect all friction brakes and the wire rope. The inspection must be conducted in accordance with applicable OSHA, ASME, and EM 385-1-1 safety standards. The government will provide certified operators to assist with the inspections. The contract will be awarded to the responsible offeror submitting the most advantageous proposal, price and other factors considered.
The solicitation is set aside for small business concerns. No incumbent contractors are named. The estimated value of the contract is not provided. The work must be completed no later than January 17, 2025, with the inspections to be performed Monday through Thursday between 0700-1600 hours. The place of performance is Fountain City, Wisconsin.
Notice text
This contract is for the inspection of one MOBILE CRANE located at Lock and Dam 5a, Fountain City, WI. The contractor shall functionally test all hydraulic, mechanical, and electrical systems through full range of operation in accordance with requirements outlined in the EM 385-1-1. The main and auxiliary hoists are to be functionally tested without load to verify the proper operation of controls. Verify safety devices for proper operation. All friction brakes will be disassembled, inspected, and measured. Brake measurements will be compared to manufacturer requirements for minimum thickness requirements for safe operations. Any issues found during inspection will be reported before reassembly. All friction brakes will be reassembled and adjusted to manufacturer’s specifications. Government will provide certified, qualified, and designated operators for inspections, and to operate the LHE. Wire rope shall be inspected in accordance with the appropriate and applicable sections of OSHA 1910, 1926, ASME B30, EM 385-1-1, and manufacturer’s recommendations.
Attachments
| File | Type | Posted |
|---|---|---|
| W912ES25Q0014_Solicitation_LD5A Linkbelt Annual Inspection.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| LD5A Link-Belt Annual Inspection | Award Notice | |
| LD5A Link-Belt Annual Inspection | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity