KRÜSS DSA100 Expert Drop Shape Analyzer, Software, Installation, and Training

The National Aeronautics and Space Administration Shared Services Center seeks a KRUSS DSA100 Expert Drop Shape Analyzer system with associated software, installation, and training, with quotes due August 13, 2026, and questions due August 11. This is a brand name or equivalent procurement set aside for total small business and designated as lowest price technically acceptable (LPTA).

Place of performance is NASA Langley Research Center, Hampton, Virginia. The system must include a high-resolution camera (CF04) at 1920 x 1200 pixels and 2300 fps frame rate, optical system (CM3200) with 7x zoom, a prism (CM3250), software-controlled dosing hub (NM3220) with pressure and syringe units, z-axis and x/y positioning stages, standard sample stage, high-power LED illumination, and standard frame. Operating conditions are +10°C to +40°C without condensation; storage at −10°C to +70°C without condensation. Three required software modules are AD3221 (Contact Angle Module) for static and dynamic contact angle measurement at 0-180 degrees with 0.01 resolution, AD3223 (Surface and Interfacial Tension Module) at 0.01–2000 mN/m range with 0.01 mN/m resolution, and AD62 (Surface Free Energy Module). Desktop control module must include Windows 11 Pro 64-bit, 16 GB RAM, 256 GB SSD, and 22-inch HD monitor with two-year manufacturer warranty. Installation and training includes unpacking, setup, system checks, and basic user training (four to eight hours typical). Period of performance is 30 days as required. NAICS code 334516; PSC code 7A20. Quotes must include vendor CAGE/UEI code, FOB Destination, leadtime, and two contact names with phone and email; reference tracking number 80NSSC26941077Q in email subject line. No credit card payment accepted. Quotes valid 30 days. Offerors must be registered in SAM.gov.