J023--Van lift Gate Installation

Closed Pre-Solicitation Posted

Solicitation number
36C25626Q0968
Agency
Responses due
Set-aside
Service-Disabled Veteran-Owned Small Business

Opportunity facts

Place of performance
Department of Veterans Affairs Gulf Coast Veterans Healthcare System Biloxi, Mississippi 39531, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 16 is preparing to solicit supply and installation of one new 1,100-pound capacity hydraulic lift gate on a Sprinter van, set aside for Service-Disabled Veteran-Owned Small Businesses, with responses to this sources sought notice due by June 29, 2026 at 12:00 p.m. Central Time.

Work will be performed in accordance with manufacturer specifications, safety standards, and applicable federal, state, and local regulations. The lift gate must be rear-mounted, compatible with the existing Sprinter van make and model, include corrosion-resistant materials suitable for coastal climates, and comply with vehicle manufacturer guidelines for all electrical work. The contractor shall provide all labor, materials, supervision, transportation, and equipment necessary, supply all required hardware, wiring, brackets, hydraulic components, and fasteners, and upon completion perform full operational testing, safety verification, and functional load testing.

Responding firms must be registered and active in SAM.gov and hold current SBA certifications. The procurement falls under NAICS 811198 (All Other Automotive Repair and Maintenance) with a small business size standard of $9 million. Responses should be emailed to Contract Specialist Angela Kennedy at angela.kennedy2@va.gov. The contracting office is located in Biloxi, Mississippi.

Notice text

Scope of Work (SOW)

Lift Gate Installation for Sprinter Van

Project Overview:

The contractor shall provide all labor, materials, supervision, transportation, and equipment necessary to supply and install one (1) new 1,100-lb capacity hydraulic lift gate onto the designated Sprinter van. The installation must be conducted in accordance with all manufacturer specifications, safety standards, and applicable federal, state, and local regulations.

Technical Requirements:

Provide and install one (1) new rear-mounted hydraulic lift gate assembly.

Minimum load capacity: 1,100 pounds.

Lift gate must be compatible with the existing Sprinter van make and model.

Provide all required hardware, wiring, brackets, hydraulic components, and fasteners.

All electrical work shall comply with vehicle manufacturer guidelines and safety standards.

Lift gate shall include corrosion-resistant materials suitable for coastal climates.

Upon completion, perform full operational testing, safety verification, and functional load testing.

Files

File Type Posted
36C25626Q0968.docx DOCX document

Similar open opportunities

Opportunity Agency Set-aside Responses due
J036--NTX Elevator Inspection | BASE + OPTIONS | 549 | NEED DATE 12. 2026 Department of Veterans Affairs North Texas VA medical centers Dallas, Texas 76218, United States · NAICS 541350 Veterans Integrated Service Network 17 Service-Disabled Veteran-Owned Small Business
Z1DA--537-26-101 Construction of Ogden Elevator Cab Interiors Jesse Brown VA Medical Center 820 S. Damen Ave Chicago IL 60612 · NAICS 238290 Veterans Integrated Service Network 12 Service-Disabled Veteran-Owned Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity