Instron Strength Tester System
Closed Special Notice Posted
- Agency
-
ACC Aberdeen Proving Ground
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333248 All Other Industrial Machinery Manufacturing
- PSC
- 3625 Textile Industries Machinery
- Place of performance
- Natick, Massachusetts 01760, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Contracting Command - Aberdeen Proving Ground (ACC-APG), Natick Division, has issued a Special Notice for an Instron Strength Tester System to support the U.S. Army Combat Capabilities Development Command - Soldier Center (DEVCOM-SC) Textile Materials Evaluation Branch. The Army intends to award a sole source, firm fixed price contract to Illinois Tool Works Inc. of Lincolnshire, Illinois, for a new 300kN Model 68FM-300 Test system. This equipment will replace existing testing systems and join previously purchased Instron equipment for calibration purposes. The system is designed to test military textile materials including personal parachutes and major cargo chute systems, providing critical safety and service-life data that can result in government savings through extended service-life determinations. The acquisition falls under NAICS code 333248 with a size standard of 750 employees.
The primary purpose of this Special Notice is to inform the market of the Army's intent to make a sole source award while providing an opportunity for other contractors to express interest and capability. The system must meet specific technical requirements including a 300kN load capacity with dual column construction, compatibility with existing laboratory equipment, and specialized software that meets government IT requirements. Interested parties must submit responses via email to the specified contracting personnel no later than 12:00 pm EST on July 16, 2025, with all questions limited to written communication only. Installation and training must be performed by factory-trained service engineers from the purchasing company, with third-party installers explicitly prohibited. The contracting officer retains sole discretion over whether to proceed with the sole source award regardless of any responses received, and the government will not reimburse any costs associated with responding to this notice.
Notice text
2 versions
Update #2 · Latest ·
The U.S. Army Contracting Command – Aberdeen Proving Ground (ACC-APG), Natick Division, in support of the U.S. Army Combat Capabilities Development Command – Soldier Center (DEVCOM-SC) Textile Materials Evaluation Branch (TMEB) intends to award a Firm Fixed Price contract on a sole source basis to Illinois Tool Works Inc. located at is 825 University Avenue, Norwood, MA 02062-2643, under the authority as prescribed in FAR 13.106(b)(1).
The requirement is for a new 300kN Model 68FM-300 Test system to not only replace the 55R4204-50kN system but to replace a significant portion of capability of the 5889-E2-C-2-600kN system as well to meet the requirements of the Army textile material evaluators at Combat Capabilities Development Command Soldier Center (DEVCOM-SC). This test system will join the previously purchased Instron equipment for calibration.
Requirements: The system shall have a load range capacity of 300N to 300kN, with a dual column load frame construction to ensure the highest degree of accuracy for the test data generated by the system. The frame with extra height provides the necessary capability to be able to perform a wide range of test methods and to test a wide range of materials and items, to meet the testing needs of the military. For example, this includes, but not limited to, the testing of personal parachutes and components to, major cargo chute systems and components providing data related safety and service-life which can result in governments savings through extend service-life. The tester must be able to perform tension, compression and cycling on materials. The following is an explanation of requirements:
Load Frame – 300kN (67,500lb) Dual Column Table Model test system with dual-belt drive system to provide synchronous movement of the ball screws which maintains crosshead alignment. System must have pre-loaded ball screws providing zero backlash during reverse stress loading. Load frame must operate on 115 volt Single Phase power without the use of an external transformer as space is limited in the lab. Load frame must be compatible with existing grips, fixtures, and other load cells/transducers within TMET.
Software – Software must meet government information technology requirements and be compatible with current Instron load frame software (Instron Universal) to allow for the sharing of test methods between systems within the laboratory and to minimize training required to run the equipment.
Load Cell – System should have one (1) load cell with the capacity and certified range of use with high axial and lateral stiffness with no more than +/-0.2% loading error.
Ergonomics/Safety – The system must have a frame mounted control panel capable of allowing the operator to jog the crosshead up and down with both a set of buttons for fast jog and a precision thumbwheel for fine jog positioning. Control panel must also have user selectable “hot keys”. For Safety of the operator and protection of load cells, grips, and fixtures.
Installation – Installation, training, and on-site calibrations must be performed by a factory trained accredited service engineer from the company the system is purchased from. Third party installers are not acceptable.
The North American Industry Classification System (NAICS) for this requirement is 333248 and the size standard is 750 employees.
THIS IS NOT A REQUEST FOR PROPOSALS. No solicitation document is available.
Interested parties may identify their interest and capability by sending responses regarding this requirement to the Army Contracting Command – Aberdeen Proving Ground CCAP-DDN, Natick Division via email ONLY to Chris Welsh (Contract Specialist) at richard.c.welsh2.civ@army.mil and Alex Ayala (Contracting Officer) at alejandro.ayala.civ@army.mil no later than 12:00 pm EST 16 July 2025. Any questions regarding this notice must be in writing only; no telephonic replies will be accepted. A determination not to compete this proposed action based on any responses to this notice is solely within the discretion of the Contracting Officer. The U.S. government will not pay for any information or administrative cost incurred in response to the Notice. All costs associated with responding to this notice will be solely at the expense of the interested party.
Update #1 ·
The U.S. Army Contracting Command – Aberdeen Proving Ground (ACC-APG), Natick Division, in support of the U.S. Army Combat Capabilities Development Command – Soldier Center (DEVCOM-SC) Textile Materials Evaluation Branch (TMEB) intends to award a Firm Fixed Price contract on a sole source basis to Illinois Tool Works Inc. located at 600 Knightsbridge Pkwy, Lincolnshire, Illinois 60069, under the authority as prescribed in FAR 13.106(b)(1).
The requirement is for a new 300kN Model 68FM-300 Test system to not only replace the 55R4204-50kN system but to replace a significant portion of capability of the 5889-E2-C-2-600kN system as well to meet the requirements of the Army textile material evaluators at Combat Capabilities Development Command Soldier Center (DEVCOM-SC). This test system will join the previously purchased Instron equipment for calibration.
Requirements: The system shall have a load range capacity of 300N to 300kN, with a dual column load frame construction to ensure the highest degree of accuracy for the test data generated by the system. The frame with extra height provides the necessary capability to be able to perform a wide range of test methods and to test a wide range of materials and items, to meet the testing needs of the military. For example, this includes, but not limited to, the testing of personal parachutes and components to, major cargo chute systems and components providing data related safety and service-life which can result in governments savings through extend service-life. The tester must be able to perform tension, compression and cycling on materials. The following is an explanation of requirements:
Load Frame – 300kN (67,500lb) Dual Column Table Model test system with dual-belt drive system to provide synchronous movement of the ball screws which maintains crosshead alignment. System must have pre-loaded ball screws providing zero backlash during reverse stress loading. Load frame must operate on 115 volt Single Phase power without the use of an external transformer as space is limited in the lab. Load frame must be compatible with existing grips, fixtures, and other load cells/transducers within TMET.
Software – Software must meet government information technology requirements and be compatible with current Instron load frame software (Instron Universal) to allow for the sharing of test methods between systems within the laboratory and to minimize training required to run the equipment.
Load Cell – System should have one (1) load cell with the capacity and certified range of use with high axial and lateral stiffness with no more than +/-0.2% loading error.
Ergonomics/Safety – The system must have a frame mounted control panel capable of allowing the operator to jog the crosshead up and down with both a set of buttons for fast jog and a precision thumbwheel for fine jog positioning. Control panel must also have user selectable “hot keys”. For Safety of the operator and protection of load cells, grips, and fixtures.
Installation – Installation, training, and on-site calibrations must be performed by a factory trained accredited service engineer from the company the system is purchased from. Third party installers are not acceptable.
The North American Industry Classification System (NAICS) for this requirement is 333248 and the size standard is 750 employees.
THIS IS NOT A REQUEST FOR PROPOSALS. No solicitation document is available.
Interested parties may identify their interest and capability by sending responses regarding this requirement to the Army Contracting Command – Aberdeen Proving Ground CCAP-DDN, Natick Division via email ONLY to Chris Welsh (Contract Specialist) at richard.c.welsh2.civ@army.mil and Alex Ayala (Contracting Officer) at alejandro.ayala.civ@army.mil no later than 12:00 pm EST 16 July 2025. Any questions regarding this notice must be in writing only; no telephonic replies will be accepted. A determination not to compete this proposed action based on any responses to this notice is solely within the discretion of the Contracting Officer. The U.S. government will not pay for any information or administrative cost incurred in response to the Notice. All costs associated with responding to this notice will be solely at the expense of the interested party.
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Special Notice - Short Term Materiel Fielding Support Modification Nov 2026 | ACC Aberdeen Proving Ground | Total Small Business | |
| Preventative Maintenance (PM), Calibration, and non-emergency repairs on the Tension & Compression machine at Letterkenny Army Depot. | ACC Redstone | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity