Electromechanical (EM) Load Frame Calibration

Open Special Notice Posted

Solicitation number
N00174-27-SIMACQ-M61-0004
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

Notice details come from SAM.gov. Updated .

About this opportunity

Naval Surface Warfare Center Indian Head Division, a Naval Sea Systems Command activity, intends to award a firm-fixed-price purchase order on a noncompetitive, sole-source basis to Illinois Tool Works, Inc. for Electromechanical (EM) Load Frame Calibration, with responses due December 2, 2026 at 10 AM EST. This is a notice of intent, not a request for quotes, and no RFQ will be issued. The notice carries a No Set-Aside Used designation.

Illinois Tool Works, operating through Instron, is the original equipment manufacturer and is identified as the only source able to service the Instron equipment. The technical drawings, diagnostics, and schematics required to maintain and repair these load frames are proprietary Instron data, and Instron services its equipment directly without third-party resellers or authorized service agents. The action cites FAR 13.106(b) and 10 U.S.C. 3204(c)(1) and supports critical NAVSEA efforts.

Interested parties may identify their interest and capability to respond by December 2, 2026 at 10 AM EST. Any response must show clear and convincing evidence that competition would be advantageous to the Government. The requirement is classified under NAICS 811210 (Electronic and Precision Equipment Repair and Maintenance) and PSC J066 (Maintenance/Repair/Rebuild of Equipment, Instruments and Laboratory Equipment). The notice was posted November 18, 2026.

Notice text

THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ).  A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED.

Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price Purchase Order on a noncompetitive basis to Illinois Tool Works, Inc.825 University AVE Norwood, Massachusetts 02062-2643 United States to provide the following services:

Electromechanical (EM) Load Frame Calibration

.

Illinois Tool Works, operating through Instron, is the Original Equipment Manufacturer (OEM) of the Instron equipment. Instron is the only source capable of servicing this equipment because the technical drawings, diagnostics, and schematics required to responsibly maintain and repair these loads frames are proprietary data owned solely by Instron.No other source has access to this proprietary technical data. Additionally, Instron sells and services its equipment directly to customers and does not utilize third-party resellers or authorized service agents for these services. Therefore, Instron is the only responsible source capable of fulfilling this requirement in support of critical NAVSEA efforts.

This action is to be undertaken in accordance with FAR 13.106 (b) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements.

The North American Industry Classification System (NAICS) 811210 for this requirement is. The FSC code is J066. The resulting purchase order will be a firm fixed price purchase order.  Negotiation being conducted using other than full and open competition procedures pursuant to authority of 10 U.S.C. 3204 (C) (1).

This Notice of Intent is NOT a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by December 02, 2026 at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or whether not to conduct a competitive procurement. The determination not to complete this proposed purchase order action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice.

Responses to this electronic notice must be made by 10:00 a.m. EST on December 02, 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM.  Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements and capabilities to Erica Sites, via email: erica.l.sites.civ@us.navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.

Similar open opportunities

Opportunity Agency Set-aside Responses due
Indicator, radio FRE, in repair/modification of Naval Supply Systems Command No set-aside
Y-Axis CNC Pressed Explosive Lathe Upgrade. Indian Head, Maryland 20640, United States Naval Sea Systems Command No set-aside
Inertial measuring, in repair/modification of Naval Supply Systems Command No set-aside
Vibration Analysis and Trim Balance System NAICS 334519 Naval Sea Systems Command No set-aside
Calibration Kit Radio Frequency Indian Head, Maryland, United States · NAICS 334519 Naval Sea Systems Command No set-aside

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors