Installation of 18x Boom Arms for a Tandem Boom System (Notice of Intent to Sole Source)
Closed Pre-Solicitation Posted
- Solicitation number
- NOI-CC-24-007308
- Agency
-
NIH Clinical Center
National Institutes of Health, Department of Health and Human Services
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811210 Electronic and Precision Equipment Repair and Maintenance
- Place of performance
- Bethesda, Maryland 20814, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
Paragraph 1:
The National Institutes of Health Clinical Center (NIH-CC) is seeking to procure the installation of 18 new boom arms to replace existing ones on a tandem boom system previously installed in the ICU suite of Building 10. This is a sole-source requirement due to the proprietary nature of the equipment, which is manufactured by Hillrom (now a subsidiary of Baxter International). The qualified service provider is KR Wolfe Inc., which previously performed the structural, electrical, and medical gas work for the initial installation. The period of performance is September 30, 2024 to September 29, 2025. While this is not a request for proposal, the government will consider capability statements from any responsible sources that could provide the required services by the due date of September 9, 2024.
Paragraph 2:
This requirement is not set aside for any specific small business category. KR Wolfe Inc. and its subcontractor Hillrom/Baxter are the current incumbent contractors. The value of the contract is not specified, but it involves the purchase and installation of 18 boom arms. The work will be performed at the NIH Clinical Center in Bethesda, Maryland.
Notice text
2 versions
Update #2 · Latest ·
Acquisition Description:
This is a Notice of Intent, not a request for proposal. The National Institute of Health, Clinical Center (NIH-CC) intends to negotiate on an other than full and open competition basis with KR Wolfe Inc.
National Institute of Health’s Clinical Center (Program) initiated a project in 2018 to replace the existing respiratory boom systems in the ICU suite located in 3SW of the Bldg. 10 CRC. The clinical center came to find out that the 2nd boom arms that were part of the boom system that was originally purchased for install did not meet user needs, so a new 2nd Boom arm replacement is needed for 18x tandem boom systems. Due to delays associated with COVID the clinical center cannot complete a change order using the original project PO, so a new requirement is needed in order to complete this purchase and replacement of the 2nd boom arms by the original equipment vendor and relevant service providers. The previously install Hillrom Respiratory Boom is called “Truport 5000, Double Arm System, Medium Load.” The additional equipment that would be installed under this requirement is also referred to as “Truport 5000”, it is a smaller model then what was already purchased.
The equipment is manufactured and supplied by Hillrom, which is now a subsidiary of Baxter International. Hillrom (now Baxter) is the supplier of the surgical equipment through the service vendor KR Wolfe. KR Wolfe performs all structural, electrical, med-gas work in preparation for the equipment to be installed by Baxter. Baxter is a supplier and installation company working for KR Wolfe as a specialty subcontractor.
This will be a sole source requirement. The proposed service provider KR Wolfe Inc. (and by their subcontractor Hillrom/Baxter) is the only qualified party to provide these services because this request is a follow-on equipment purchase to replace equipment that was previously purchased and installed involving the aforementioned contractors. The 2nd boom arm that is needed for install is proprietary equipment being installed on a base tandem boom system that is also proprietary equipment produced by the equipment manufacturer/supplier, Hillrom (now Baxter).
The equipment install is being handled by the general contractor, KR Wolfe, with assistance from the equipment contractor Baxter. Baxter provides the install of the equipment itself, while KR Wolfe does the site prep and the demolition of the equipment that is being replaced. The equipment is unique to Baxter as the base of the system that this additional equipment is attached to, the respiratory boom, is produced by Baxter. This additional boom that would be purchased/installed has to be a Baxter product as they are the only manufacturer whose booms would attach to the base. Hillrom (now Baxter) is the supplier of the surgical equipment through KR Wolfe. KR Wolfe performs all structural, electrical, med-gas work in preparation for the equipment to be installed by Baxter. Baxter is a supplier and installation company working for KR Wolfe as a specialty subcontractor.
See Statement of Work (general).
Place of Performance or Delivery:
The Period of Performance is 09/30/2024 – 09/29/2025
Place of Performance: NIH Clinical Center in Bethesda, MD
The statutory authority for this sole source requirement is 41 U.S.C. 1901 (a) (1) as implemented by FAR 13.501(a) – Sole source (including brand name) acquisitions because there is only one responsible source and no other supply of service will satisfy agency requirements. THIS IS NOT A REQUEST FOR PROPOSAL. All responsible sources that could provide the required may submit a capability statement that will be considered by email (subject line to reference NOI-CC-24-007308) by 04:00 PM eastern standard time on 09/18/2024 to: lu-chang.lu@nih.gov
All responses received by the closing date of this synopsis will be considered by the Government. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government.
Update #1 ·
Acquisition Description:
This is a Notice of Intent, not a request for proposal. The National Institute of Health, Clinical Center (NIH-CC) intends to negotiate on an other than full and open competition basis with KR Wolfe Inc.
National Institute of Health’s Clinical Center (Program) initiated a project in 2018 to replace the existing respiratory boom systems in the ICU suite located in 3SW of the Bldg. 10 CRC. The clinical center came to find out that the 2nd boom arms that were part of the boom system that was originally purchased for install did not meet user needs, so a new 2nd Boom arm replacement is needed for 18x tandem boom systems. Due to delays associated with COVID the clinical center cannot complete a change order using the original project PO, so a new requirement is needed in order to complete this purchase and replacement of the 2nd boom arms by the original equipment vendor and relevant service providers. The previously install Hillrom Respiratory Boom is called “Truport 5000, Double Arm System, Medium Load.” The additional equipment that would be installed under this requirement is also referred to as “Truport 5000”, it is a smaller model then what was already purchased.
The equipment is manufactured and supplied by Hillrom, which is now a subsidiary of Baxter International. Hillrom (now Baxter) is the supplier of the surgical equipment through the service vendor KR Wolfe. KR Wolfe performs all structural, electrical, med-gas work in preparation for the equipment to be installed by Baxter. Baxter is a supplier and installation company working for KR Wolfe as a specialty subcontractor.
This will be a sole source requirement. The proposed service provider KR Wolfe Inc. (and by their subcontractor Hillrom/Baxter) is the only qualified party to provide these services because this request is a follow-on equipment purchase to replace equipment that was previously purchased and installed involving the aforementioned contractors. The 2nd boom arm that is needed for install is proprietary equipment being installed on a base tandem boom system that is also proprietary equipment produced by the equipment manufacturer/supplier, Hillrom (now Baxter).
The equipment install is being handled by the general contractor, KR Wolfe, with assistance from the equipment contractor Baxter. Baxter provides the install of the equipment itself, while KR Wolfe does the site prep and the demolition of the equipment that is being replaced. The equipment is unique to Baxter as the base of the system that this additional equipment is attached to, the respiratory boom, is produced by Baxter. This additional boom that would be purchased/installed has to be a Baxter product as they are the only manufacturer whose booms would attach to the base. Hillrom (now Baxter) is the supplier of the surgical equipment through KR Wolfe. KR Wolfe performs all structural, electrical, med-gas work in preparation for the equipment to be installed by Baxter. Baxter is a supplier and installation company working for KR Wolfe as a specialty subcontractor.
See Statement of Work (general).
Place of Performance or Delivery:
The Period of Performance is 09/30/2024 – 09/29/2025
Place of Performance: NIH Clinical Center in Bethesda, MD
The statutory authority for this sole source requirement is 41 U.S.C. 1901 (a) (1) as implemented by FAR 13.106-1 only one responsible source and no other supply of service will satisfy agency requirements. THIS IS NOT A REQUEST FOR PROPOSAL. All responsible sources that could provide the required may submit a capability statement that will be considered by email (subject line to reference NOI-CC-24-007308) by 04:00 PM eastern standard time on 09/09/2024 to: lu-chang.lu@nih.gov
All responses received by the closing date of this synopsis will be considered by the Government. A determination not to compete this requirement, based upon responses to this notice, is solely within the discretion of the Government.
Files
| File | Type | Posted |
|---|---|---|
| 1. Statement of Work (general).doc | DOC document |
Similar open opportunities
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity