Install Holding Cell Lt. Area – Federal Correctional Institution (FCI) Oxford
Special Notice Posted
- Solicitation number
- 15BBNF26Q41000005
- Agency
-
Bureau of Prisons
Department of Justice
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332312 Fabricated Structural Metal Manufacturing
- Place of performance
- Oxford, Wisconsin, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Bureau of Prisons issued a presolicitation notice for supply and delivery of materials to install three holding cells at Federal Correctional Institution Oxford; this is a total small business set-aside with an estimated value of approximately $40,000. The requirement is for materials only—fabrication, assembly, welding, and fastening will be performed by FCI Oxford staff using institutional labor resources, with no contracted installation services included. Each holding cell shall be a box-type cage with inside dimensions of 38 inches width by 38 inches depth by 96 inches height, designed to ACA standards requiring a minimum of 10 square feet of unencumbered floor space per inmate. The contracting officer intends to solicit quotations directly from a minimum of three suppliers using simplified acquisition procedures rather than post a full solicitation on SAM.gov; the acquisition method is RFO FAR 12.201-1(c)(2) for commercial services below the Simplified Acquisition Threshold. The government retains sole and final authority to determine technical acceptance based on submitted documentation and compliance with stated standards. NAICS 332312; PSC Z2FF.
Notice text
This is a presolicitation notice for a commercial supply requirement. The Federal Correctional Institution (FCI) Oxford requires a qualified and licensed supplier for the supply and delivery of the materials needed for the project “Install Holdig Cell in Lt. Area”. This project is direct purchase of materials only. Fabrication and installation of the panels shall be performed by FBOP Facilities personnel utilizing institutional labor resources. No contracted installation services are included in this project. Government's Right of Final Technical Acceptance: The government retains the sole and final authority to determine technical acceptance for all submitted products, based on the provided documentation and compliance with stated standards.
The supply includes:
- Three (3) stand alone Holding Cells that need to be built. FCI Oxford Staff will assemble, weld, and fasten the panels together.
- The Holding Cells shall be a box-type cage with an overall INSIDE dimension of 38" width x 38" depth x 96" height. Per American Correctional Association (ACA) standards, holding cells/rooms require a minimum of 10 square feet of unencumbered floor space per inmate.
Estimated Value: Approximately $40,000 (below the Simplified Acquisition Threshold of $350,000).
Product Service Code (PSC): Z2FF – Repair or Alteration of penal facilities
NAICS Code: 332312 – Fabricated Structural Metal Manufacturing
Set-Aside: Small Business.
Acquisition Method – RFO FAR 12.201-1(c)(2)
This acquisition will use simplified procedures for commercial services at or below the SAT. In accordance with RFO FAR 12.201-1(c)(2), the contracting officer intends to solicit quotations directly from suppliers rather than post a full solicitation/RFQ on SAM.gov.
When using this direct solicitation method:
- A presolicitation notice must be posted in the Governmentwide Point of Entry (GPE) per Subpart 5.1, unless an exception in 5.101(b) applies.
- Quotations must be solicited from a minimum of three sources.
- Whenever practicable, solicitations should include at least two sources not contacted in the previous solicitation.
No separate written solicitation will be posted on SAM.gov. Quotations will be requested directly from selected sources after this notice. All responsible sources may submit a quotation if contacted by the contracting officer.
Important Note:
This announcement serves only as the presolicitation notice. Quotes are not being accepted in response to this notice. Interested parties should not submit unsolicited quotes or proposals at this time.
SAM.gov Registration
Quoters must be registered in the System for Award Management (SAM.gov) at the time of award.
Applicable Provisions and Clauses
The resulting contract will incorporate provisions and clauses applicable to commercial services, including (but not limited to):
- 52.212-1 Instructions to Offerors – Commercial Products and Commercial Services
- 52.212-2 Evaluation – Commercial Products and Commercial Services
- 52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services
Full text of clauses is available at acquisition.gov.
Point of Contact
Candi Smart, Contracting Officer
Federal Bureau of Prisons
Email: csmart@bop.gov
All inquiries shall be submitted in writing via email.
This notice is prepared in accordance with the format outlined in Subpart 12.1 of the Revolutionary FAR Overhaul (RFO). The solicitation documents and incorporated provisions and clauses are in effect through current Federal Acquisition Circular in effect at the time of issuance.
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity