Inspect Hangar 7 & 8 Door Welds
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W50S8J20R0004
- Agency
- New York National Guard Army National Guard, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541990 All Other Professional, Scientific, and Technical Services
- Place of performance
- Schenectady, New York 12302, United States
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
The purpose of this update is to answer the following questions which were brought up during the site visit:
Q1: Are there photographs of the doors available?
A1: Please see attached Photo 1 and Photo 2.
Q2: Do you have the model number of the doors?
A2: Please see Attachment B. It has information on the model number of the Megadoor, as well as the fabric overlay.
Q3: Do you have construction plans for the doors?
A3: Please see Attachment C
Q4: Are there any site specific safety procedures that are required to prop the door during inspection?
A4: At this time, plans should be made to isolate the area of work to prevent travel beneath the door. The door should NOT be propped, for it can damage the door. Inspections should be completed from a position other than beneath the door. Additional safety requirements may be requested at the pre-construction meeting. It is the responsibility of the contractor to supply any lifts, or other equipment necessary to perform the specified inspection.
-END UPDATE-
The 109th Airlift Wing, located in Scotia, NY requires a certified welding inspector to perform weld inspection services in accordance with American Welding Society AWS D1.1:2015, Structural Welding Code – Steel, Chapter 6, on two aircraft hangars. Each hangar has a 3-part door.
Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to perform Weld InspectionServices, as defined in this PWS
Background: The ANG recently had welds fail on a vertical lift fabric hangar door structural members and is requiring an assessment of all welds on door-bottom beams for all vertical lift fabric hangar doors.
Update #1 ·
The 109th Airlift Wing, located in Scotia, NY requires a certified welding inspector to perform weld inspection services in accordance with American Welding Society AWS D1.1:2015, Structural Welding Code – Steel, Chapter 6, on two aircraft hangars. Each hangar has a 3-part door.
Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to perform Weld InspectionServices, as defined in this PWS
Background: The ANG recently had welds fail on a vertical lift fabric hangar door structural members and is requiring an assessment of all welds on door-bottom beams for all vertical lift fabric hangar doors.
Attachments
| File | Type | Posted |
|---|---|---|
| Attachment C2.jpg | JPG image | |
| Attachment B Model Number.pdf | ||
| Attachment C1.jpg | JPG image | |
| Photo 1.jpg | JPG image | |
| Photo 2.jpg | JPG image | |
| W50S8J20R0004 Megadoor weld.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| HVAC Replacements | Award Notice | |
| HVAC Replacements | Limited / Sole Source Justification | |
| Inspect Hangar 7 & 8 Door Welds | Solicitation | |
| HVAC Replacements | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity