Hydraulic Power Unit
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W911S225U1164
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333996 Fluid Power Pump and Motor Manufacturing
- PSC
- 4320 Power And Hand Pumps
- Place of performance
- Ship to address:James FerraroBuilding 772: 6446 Indiana AveFort Leonard Wood, MO 65473 65473
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum is seeking to procure a Hydraulic Power Unit through this solicitation. The unit must meet specific technical requirements including a minimum 27 horsepower engine, 4.5 gallon fuel capacity, 3 gallon hydraulic fluid reservoir, and dual output capacity with selectable flow rates of 5 GPM and 8 GPM. Additional specifications include operating pressure of at least 2000 PSI, open center circuit type, HTMA flush face type couplers, auto choke, lifting hook, solid tires, recessed control panel, side lift handles, and 12V DC plug for auxiliary power. The unit must not exceed dimensional limits of 30 inches in height, 26 inches in width, 38 inches in length, and cannot weigh more than 375 pounds. The solicitation was posted on July 17, 2025, with proposals due by July 23, 2025, providing only six days for response preparation.
This opportunity is designated as a Total Small Business set-aside, restricting participation to qualifying small business entities. The solicitation does not specify the quantity of units required, award values, or identify any incumbent contractors. The work falls under NAICS code 333996 for Fluid Power Pump and Motor Manufacturing and PSC code 4320 for Power and Hand Pumps. Performance will take place at 6446 Indiana Ave, Fort Leonard Wood, Missouri 65473, indicating the equipment will be delivered to this Army installation. The tight timeline between posting and due date suggests this may be an urgent procurement requirement for the military facility.
Notice text
Hydraulic Power Unit Salient CharacteristicsMUST BE AT LEAST 27 HPMUST HAVE A FUEL CAPACITY OF AT LEAST 4.5 GAL.MUST HAVE A HYDRAULIC FLUID RESEVOIR OF AT LEAST 3 GAL.MUST HAVE A DUAL OUTPUT CAPACITY WITH SELECTABLE GPM OF 5GPM AND 8GPMMUST HAVE OPERATING PRESSURE OF AT LEAST 2000 PSIMUST HAVE An OPEN CENTER CIRCUIT TYPEMUST HAVE COUPLERS THAT ARE HTMA FLUSH FACE TYPEMUST NOT BE HIGHER THAN 30IN.MUST NOT BE WIDER THAN 26IN.MUST NOT BE LONGER THAN 38IN.MUST HAVE AUTO CHOKEMUST HAVE LIFTING HOOKMUST HAVE SOLID TIRESMUST HAVE RECESSED CONTROL PANELMUST HAVE SIDE LIFT HANDLESMUST HAVE 12V DC PLUG FOR AUXILARY POWERCANNOT WEIGH OVER 375 LBS
Notice history
| Notice | Type | Posted |
|---|---|---|
| Hydraulic Power Unit | Award Notice | |
| This notice | Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Pump Unit, Hydraulic | Land and Maritime | Total Small Business | |
| Motor-pump, hydraulic | Land and Maritime | Total Small Business | |
| Pump, hydraulic | Land and Maritime | Total Small Business | |
| Pump, hydraulic | Land and Maritime | Total Small Business | |
| Pump, hydraulic | Land and Maritime | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity