Housing, antifrictio
Cancelled Solicitation Posted
- Solicitation number
- SPRTA125Q0212
- Agency
-
Aviation
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336412 Aircraft Engine and Engine Parts Manufacturing
- Place of performance
- United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
Defense Logistics Agency Aviation seeks quotations for a housing, antifrictional (#3 bearing front face seal, NSN 2840-00-343-7601) for the F100 engine core module rear compressor, with proposals due July 24, 2027. The procurement is an FMS (Foreign Military Sales) case with no small business set-away, and will use Lowest Price Technically Acceptable (LPTA) evaluation.
Place of performance is the United States. All proposals must include separate quotes for Bid A (first article testing required) and Bid B (first article not required). Under Bid A, the contractor must deliver a first article test plan and test report for approval by the FA monitor, plus two additional first articles and one production unit. Under Bid B, the contractor delivers three production units without first article testing. Offerors who have furnished parts to the DoD within the past 36 months may request a waiver of first article requirements pending cognizant engineer approval.
The procurement requires Unique Item Identification (UID) marking in accordance with MIL-STD-130L, with Construct 2 (Issuing Agency Code, CAGE Code, Original Part Number, and Serial Number) as the preferred format. UID shall be applied in addition to original human-readable information without compromising item integrity. The NAICS code is 336412, Aircraft Engine and Engine Parts Manufacturing. The procurement is subject to Buy American Act and Balance of Payments Program requirements. The solicitation has been amended four times since its original September 10, 2025 posting, most recently on May 26, 2026, to extend the closing date to July 24, 2026, later extended to July 24, 2027.
Notice text
ALL PROPOSALS MUST INCLUDE A QUOTE FOR BOTH BID A (FIRST ARTICLE REQUIRED), AND BID B (FIRST ARTICLE NOT
REQUIRED). NO EXCEPTIONS
BID A - FIRST ARTICLE REQUIRED - CONTRACTOR TEST
0001AA - 1 LO FA Test Plan (Send to FA Monitor for approval)
0001AB - 1 LO FA Test Report (Send to FA Monitor for approval)
0001AC - 1 Each FA (Expended in Testing) DO NOT SEND TO FA MONITOR
0001AD - 2 Each FA (In Addition to Production Quantity) DO NOT SENT TO FA MONITOR
0001AE - 1 Each Production Quantity - DO NOT SEND TO FA MONITOR
1 LO FA Test Plan and 1 LO FA Test Report will be delivered to the FA monitor.
Upon written approval, the 2 each First Article and 1 each Production Quantity (total of 3 each) will be delivered to the FMS
country.
Offerors that have furnished parts to the DoD within the past 36 months "may" request a waiver pending the
cognizant engineers approval.
BID B - NO FIRST ARTICLE REQUIRED
0001AF - 3 Each (Production Quantity) (No FA Required/One unit price)
UID REQUIREMENT: The Government does not intend to tell contractors the specific data to be put into each
mark.International Standards and MIL-STD-130L provide the guidance needed by the contractor to determine what information
is required within the mark and acceptable formats for applying the mark. It is the contractor's discretion on which UID
construct to use according to current business practices. Still, "The preferred format for Unique Identification (UID) is Construct
2 (Issuing Agency Code, Enterprise Identification [CAGE Code], Original Part Number, and Serial Number) as set forth by
MIL-STD-130L (or later revision) and the DOD Guide to Uniquely Identifying Items, version 1.4, April 2004 (or later revision). UID
shall be in addition to the original Human Readable Information and applied using comparable marking methods. Application of
UID markings shall in no way compromise the integrity of the item."
BASIC INFORMATIONAL LINE ITEM
CONTRACTOR TEST
Item No.
0001
Firm Fixed Price
NSN: 2840-00-343-7601 NZ
HOUSING, ANTIFRICTIO
#3 bearing front face seal maitains the seal to contain the oil in the bearing compartment of core module rear compressor.
Stainless Steel
Manufacturer Part Number
52661 4012468
75370 4018381 4012501
Associated Document(s) Line Item(s)
FD20302400536 0001
Priority: R
Foreign Military Sales :FMS Case:
Buy American Act/Balance of Payments Program
IUID Required: Yes
Physical Item Markings:
Files
| File | Type | Posted |
|---|---|---|
| SPRTA125Q0212_______0004.pdf | ||
| SPRTA125Q0212_______0003.pdf | ||
| SPRTA125Q0212_______0002.pdf | ||
| SPRTA125Q0212_______0001.pdf | ||
| SPRTA125Q0212.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| New Manufactured Material F108 HOUSING, GEARBOX, TUR, NSN: 2840-01-187-3185PN (AMC 3Z) | Aviation | No set-aside | |
| Seal, metallic, aircr | Aviation | No set-aside | |
| FD2030-26-02605 | Aviation | No set-aside | |
| Bearing, roller, cyli | Aviation | No set-aside | |
| NSN2840-00-110-6672OK_HousingGearbox_J85_PN37R601155P139_FD2030-26-00835 | Aviation | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity