Honeycomb Sandwich Structure Inspection

Closed Solicitation Posted

Solicitation number
AF103-253
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic AF103-253

Component: USAF

Command: WR-ALC

Phase: SBIR Program Phase I Action

Technology Areas: Materials

Keywords: Nondestructive inspection; NDI; honeycomb structure; disbonds; water intrusion

Objective:

Develop a process capable of performing reliable NDI (Nondestructive Inspections) of large areas of honeycomb sandwich structure on aircraft.

Description:

An innovative approach is needed in order to have a practical method of performing NDI on honeycomb sandwich structures. Honeycomb sandwich structures on aircraft are susceptible to disbonds and fluid intrusion which can limit the survivability of those structures. Currently, the Air Force utilizes ultrasound and coin tap tests as the primary NDI methods to inspect for disbonds in honeycomb sandwich structures. Both of these methods can be labor-intensive and dependent on inspector interpretation, resulting in inconsistent inspections. Also, ultrasonic methods require precise calibration standards that can be expensive to manufacture and often do not accurately mimic in-service disbonds. Radiography is the current NDI method for inspecting honeycomb sandwich structures for fluid intrusion. This method can also be labor-intensive, expensive, and due to the safety precautions associated with radiography, can create scheduling difficulties and limit facility use.

The skin and core of the honeycomb sandwich structures encountered can also be made of many different materials, both metals and nonmetals. The structures are not limited to flat surfaces as they can have varying contours. These variations and other complications cause reliability and feasibility issues on the aforementioned inspection procedures.

An innovative proposal should present a reliable method to inspect honeycomb sandwich structures on aircraft and should be designed for maximum applicability with regard to material and design variation. Targeted capabilities should consider a non-contact inspection, remote inspection capability, and automated or semi-automated inspection. The new process should also have the capability to determine the size and depth of disbonds as well as the capability to simultaneously detect both near and far side defects and fluid intrusion. In the area of fluid intrusion detection, the ability to differentiate between water, other liquids, and other anomalies would also be a focus area.

Phase I:

Determine the feasibility of the proposed NDI method to 1) increase disband Probability of Detection over current methods as well as flaw characterization and 2) detect fluid intrusion: location, amount, and type of fluid. Develop a prototype design utilizing the chosen inspection method.

Phase II:

Develop the prototype designed in Phase I, refining the design as necessary to fully address practicality issues such as safety and ease of use on aircraft. Test the prototype and demonstrate its ability to reliably detect defects in honeycomb sandwich structures.

Phase III:

DUAL USE COMMERCIALIZATION: Military Application: This technology applies to all military aircraft that have honeycomb sandwich structures susceptible to disbonds and water intrusion.

Commercial Application: This technology applies to any commercial aircraft that have honeycomb sandwich structures susceptible to disbonds and water intrusion commercial, and honeycomb structures that would require NDI.

Files

File Type Posted
AF103-253.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors