AF103-253.pdf

PDF 47 KB Posted

Attached to
Honeycomb Sandwich Structure Inspection
Solicitation number
AF103-253
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AF103-253: Honeycomb Sandwich Structure Inspection

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Materials

MODERNIZATION PRIORITIES:

KEYWORDS:

Nondestructive inspection, NDI, honeycomb structure, disbonds, water intrusion

ADDITIONAL INFORMATION

OBJECTIVE:

Develop a process capable of performing reliable NDI (Nondestructive Inspections) of large areas of honeycomb sandwich structure on aircraft.

DESCRIPTION:

An innovative approach is needed in order to have a practical method of performing NDI on honeycomb sandwich structures. Honeycomb sandwich structures on aircraft are susceptible to disbonds and fluid intrusion which can limit the survivability of those structures. Currently, the Air Force utilizes ultrasound and coin tap tests as the primary NDI methods to inspect for disbonds in honeycomb sandwich structures. Both of these methods can be labor-intensive and dependent on inspector interpretation, resulting in inconsistent inspections. Also, ultrasonic methods require precise calibration standards that can be expensive to manufacture and often do not accurately mimic in-service disbonds. Radiography is the current NDI method for inspecting honeycomb sandwich structures for fluid intrusion. This method can also be labor-intensive, expensive, and due to the safety precautions associated with radiography, can create scheduling difficulties and limit facility use. The skin and core of the honeycomb sandwich structures encountered can also be made of many different materials, both metals and nonmetals. The structures are not limited to flat surfaces as they can have varying contours. These variations and other complications cause reliability and feasibility issues on the aforementioned inspection procedures. An innovative proposal should present a reliable method to inspect honeycomb sandwich structures on aircraft and should be designed for maximum applicability with regard to material and design variation. Targeted capabilities should consider a non-contact inspection, remote inspection capability, and automated or semi-automated inspection. The new process should also have the capability to determine the size and depth of disbonds as well as the capability to simultaneously detect both near and far side defects and fluid intrusion. In the area of fluid intrusion detection, the ability to differentiate between water, other liquids, and other anomalies would also be a focus area.

PHASE I:

Determine the feasibility of the proposed NDI method to 1) increase disband Probability of Detection over current methods as well as flaw characterization and 2) detect fluid intrusion: location, amount, and type of fluid. Develop a prototype design utilizing the chosen inspection method.

PHASE II:

Develop the prototype designed in Phase I, refining the design as necessary to fully address practicality issues such as safety and ease of use on aircraft. Test the prototype and demonstrate its ability to reliably detect defects in honeycomb sandwich structures.

PHASE III DUAL USE APPLICATIONS:

DUAL USE COMMERCIALIZATION: Military Application: This technology applies to all military aircraft that have honeycomb sandwich structures susceptible to disbonds and water intrusion. Commercial Application: This technology applies to any commercial aircraft that have honeycomb sandwich structures susceptible to disbonds and water intrusion commercial, and honeycomb structures that would require NDI.

REFERENCES:

Walker, James, et al. “Nondestructive Testing Techniques for the Ares I Common Bulkhead Bond Line.”

Materials Evaluation 67 (2009): 775-83.

1.

Radtke, T.C., A. Charon, and R. Vodicka. “Hot/Wet Environmental Degradation of Honeycomb Sandwich Structure Representative of F/A-18: Flatwise Tension Strength.” Australian DSTO Technical Report. No.

0908. Melbourne Victoria, Australia. DSTO Aeronautical and Maritime Research Laboratory, 199

2.

Hsu, David K., Vinay Dayal, and Daniel J. Barnard. “Heat-Induced Disbonding and Degradation of Adhesive Bonds in Honeycomb Sandwich Structures.” Materials Evaluation 67 (2009): 843-50.

3.

Hsu, David K., Daniel J. Barnard, and Dennis P. Roach. “Tap Test: Evolution of an Old Technique.” Materials Evaluation 67 (2009): 785-91.

4.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .