High Power High Efficiency Single Mode Diode Emitter

Closed Solicitation Posted

Solicitation number
A19-085
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A19-085

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Electronics

Keywords: high power diodes; coherent diode lasers; high energy lasers

Objective:

To develop high power, high efficiency diode emitters while maintaining single mode emission.

Description:

Poor efficiency in high energy lasers (HELs) is a key driver to the large Size, Weight, and Power (SWaP) requirements of HEL Weapon Systems. Current HEL Weapon Systems are primarily using spectrally beam combined or coherently beam combined fiber laser technology. Electrical to optical efficiency of these HELs are at best 40% after diode pump power into the fiber and fiber gain media losses. One potential approach to improving the efficiency is to remove the fiber laser gain media and directly beam combine single mode diode lasers. For this approach to be practical the power level, beam quality, and efficiency of single mode emitters must be sufficient. Individual diode lasers have shown up to efficiencies greater than 75% and power levels on the order of kilowatts, but most often beam quality suffers when these parameters are achieved. This solicitation is looking for a solution to achieve all parameters in one prototype. • Power (single emitter): Threshold: 4W; Objective: >10W • Electrical to Optical Efficiency: Threshold: 50%; Objective: 70% • Beam Quality (M2): Threshold: 1.75; Objective: 1.1 • Wavelength: Wavelengths that transmit through the atmosphere

Phase I:

The phase I effort shall include analysis and design of the proposed diode emitter concept. The analysis shall provide confidence that the proposed concept design will be successful in meeting the specifications. Power, efficiency, and beam quality expectations out of a single emitter shall be addressed in the Phase I effort.

Phase II:

During phase II, the phase I designs will be utilized to fabricate, test and evaluate a single emitter. The power, efficiency, and beam quality specifications shall be demonstrated during the phase II effort.

Phase III:

During phase III, the contractor will work with the government to integrate high power, highly efficient, good beam quality emitters into a kilowatt class direct diode high energy laser. The direct diode high energy laser developed will be integrated and tested in one of the Army’s high energy laser demonstrators or testbeds.

Files

File Type Posted
A19-085.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors