High Performance Power Generation for High Altitude Platforms

Closed Solicitation Posted

Solicitation number
A09-180
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A09-180

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Ground Sea; Space Platforms

Keywords: KEYWORDS: Solar power; solar cell; photovoltaic; thermophotovoltaic; high altitude airship; high altitude UAV; thin films; up-conversion

Objective:

Develop an improved energy production technology suitable for primary power for sustained flight of high altitude platforms.

Description:

Long-endurance powered stratospheric flight requires primary power technology that gathers power from the environment, such as photovoltaics. For future versions of high altitude platforms, this will require photovoltaic technology that has higher efficiencies and higher specific power levels than what is presently available, in large-scale arrays. For systems that use direct sunlight, such as photovoltaics, minimum performance requirements are 16% efficiency in the Air Mass Zero (AM0) environment (> 20% preferred), and 1000 watts/kilogram specific power at the cell level. Higher performance for both of these parameters is highly desirable. For specific power measurements, the mass of the cell includes the active components and substrate. Concentrating systems and approaches are not of interest.

Alternate approaches to extracting energy from the high altitude platforms environment are also of interest. This may include approaches leveraging the blackbody radiation from the earth, which is continuously available, or leveraging temperature differences. For technologies that can continuously extract energy from the high altitude platforms environment, thereby reducing or eliminating the need for nighttime energy storage (such as batteries), lower specific power, on the order of tens of watts per kilogram, may be acceptable. Technologies that leverage available 4 to 40 micron energy to enhance the performance of conventional visible-range photovoltaics are also of interest.

Any technology proposed should be scalable to systems on the order of tens to hundreds of kilowatts, and capable of operating independently without maintenance for at least one year at the high altitude platforms flight altitude of 65,000 feet. Fuel-based systems will not be considered. The technology should be capable of functioning even when the high altitude platform has zero net air speed, and should not impose significant drag or thermal loads on the high altitude platform. Photovoltaic costs of under $50/Watt (projected at scale-up) are strongly preferred.

Phase I:

Conduct feasibility studies, technical analysis and simulation, and small-scale proof-of-concept demonstrations, according to proposed innovations and improvements. Initial technical feasibility of the critical functions shall be demonstrated. An initial conceptual approach to incorporating the technology in a high altitude platform shall be developed.

Phase II:

Implement technology assessed in Phase I effort. Phase II effort should include demonstration of an energy generation prototype with capabilities at a significant scale, demonstrating specific power and efficiency performance. For photovoltaic and similar technologies, multiple cells should be built to demonstrate efficiency and specific power. A practical plan to transition the technology to a complete high altitude platform energy generation system shall be developed. A TRL of 4 should be demonstrated.

Phase III:

The contractor shall finalize the technology of the high performance power generation system and begin commercialization of the product. This technology will provide higher efficiencies and higher specific power levels for power generation than what is presently available. This technology can be used for high altitude long endurance platforms such as High Altitude Airship but also be used in commercial applications, e.g., high efficiency photovoltaic cells.High altitude long endurance Unmanned Air Vehicles would also benefit from the small size, weight and power. Space applications such as tactically responsive Space platforms (for example, nanosatellites) would also potentially benefit.

PRIVATE SECTOR COMMERCIAL POTENTIAL: The proposed technology would advance performance of environmentally friendly electrical power generation, with application in a spectrum of areas, in both the government and private sectors. The commercial satellite industry would likely be interested for remote sensing, communications, and other functions.

Files

File Type Posted
A09-180.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors