High Bandwidth Redundant Communication Links for Small Satellites

Closed Solicitation Posted

Solicitation number
A16-079
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A16-079

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Space Platforms

Keywords: satellite; constellation; space; low earth orbit; transceiver; transmitter; receiver; radio; frequency; wideband; Ka-Band; X-Band; S-Band; communications; downlink; uplink

Objective:

Develop a transceiver payload that can provide high bandwidth downlink in Ka band and a backup moderately high bandwidth downlink in X band for small satellites in Low Earth Orbit.

Description:

Small satellites [and constellations] in Low Earth Orbit (LEO) have increasingly shown military and commercial value for the sensors and data they can provide. Department of Defense use of small satellites for earth sensing is increasing (e.g. Kestrel Eye). Commercial companies are also interested in the data small satellites can provide (e.g. Skybox, Flock-1, Scout). However, as the sensor payload capability increases, the ability of currently available small satellite transmitters to transmit large amounts of data to the ground are strained. This problem is typically exacerbated by the short line of sight contact windows over ground stations. Additionally, if the main communications link is experiencing interference or an outage, these critical contact opportunities might be missed. A redundant high bandwidth communications link that could be easily adapted for commercial and government use is highly desired. Therefore, a redundant communications link (Transmit) that can provide 120MBPS (Threshold) and 300MBPS (Objective) in spectrum allocated for government use in Ka band and 50MBPS (Threshold) and 100MBPS (Objective) in spectrum allocated for government use in X band is desired. Advanced techniques for increasing the throughput are encouraged if they can be easily implemented in both space and ground transceivers. An uplink (receive) capability of 1MBPS (Threshold) and 5MBPS (Objective) in spectrum allocated for government use is desired. The proposed system must be capable of one (threshold) and three (Objective) continuous transmission events of at least eight minutes each per orbit. The proposed system must be capable of commanded (threshold) and automatic (Objective) Doppler compensation. The proposed system must provide sufficient RF power to establish communications with a 2.4m ground antenna from LEO. The transceiver size must be demonstrated to fit reasonably within the volume and mass constraints of a small satellite. The transceiver must be capable of dissipating the expected heat generated during operation.

Synopsis of requirements:

- Shall provide 120MBPS (Threshold) and 300MBPS (Objective) in spectrum allocated for government use in Ka band (Advanced techniques for increasing the throughput are encouraged if they can be easily implemented in both space and ground transceivers);

- Shall provide 50MBPS (Threshold) and 120MBPS (Objective) in spectrum allocated for government use in X band. Advanced techniques for increasing the throughput are encouraged if they can be easily implemented in both space and ground transceivers);

- Shall provide an uplink (receive) capability of 1MBPS (Threshold) and 5MBPS (Objective) in spectrum allocated for government use in S band (Advanced techniques for increasing the throughput are encouraged if they can be easily implemented in both space and ground transceivers);

- Shall be capable of one (threshold) and three (Objective) continuous transmission events of at least eight minutes each per orbit;

- Shall be capable of commanded (threshold) and automatic (Objective) Doppler compensation;

- Shall provide sufficient RF power to establish high data rate communications with a 2.4m ground antenna from LEO;

- The transceiver size shall be less than 10cmx10cmx20cm (Threshold) and less than 10cmx10cmx10cm (Objective);

- The transceiver must be capable to storing up to 1 TB of data;

- The transceiver must be capable of storing multiple waveforms;

- The transceiver must be capable of receiving new uplinked waveforms and changing waveforms quickly on-orbit;

- The transceiver shall employ a minimum of 256-AES encryption

- The transceiver shall be capable of dissipating the expected heat generated during operation; and

- The transceiver mass shall be less than 2kg (Threshold) and less than 1kg (Objective).

Phase I:

Phase I is expected to produce an initial transceiver design that can be easily adapted for commercial and Government use. Technical feasibility and predicted performance will be determined through detailed analysis and modeling.

Phase I deliverables will include:

- Initial transceiver design;

- Definition of the requirements and how they will be verified in Phase II;

- Technical feasibility and predicted performance of the approach including thermal, input and RF power will be determined through detailed analysis and modeling;

- Selection of bands for commercial and Government variants will be identified;

- Definition and development of key component technological milestones related to the Phase II program; and

- All data required to support a Stage 1 “Conceptual” DD1494 frequency allocation request and the analogous FCC process.

Phase II:

Phase II is expected to culminate in a protoflight transceiver based on a detailed design. The proposed approach will verify requirements established in Phase I and validate analyses and modeling performed in Phase I. Operation of the protoflight transceiver will be demonstrated with a ground station. The demonstration will be configured to mimic the radio frequency channel expected for use in LEO.

Phase II deliverables will include:

- Matured transceiver design

- Transceiver prototype

- Verification of compliance of all requirements;

- Ground station design;

- Operational demonstration of the transceiver in a representative radio frequency channel; and

- All data required to support a Stage 3 “Developmental” DD1494 frequency allocation request and the analogous FCC process.

Phase III:

The successful completion of this Phase II SBIR will result in a transceiver prototype that can be transitioned to a Phase III for commercial or Government use. This transceiver is attractive for many applications because of the small form factor and game changing capability afforded. There are numerous DoD small satellite programs, especially those sponsored by the U.S. Army Space and Missile Defense Command, and numerous and varied small satellite constellations for remote earth sensing, like those mentioned above, that would benefit from this innovation. Specific military applications include ISR missions requiring color imaging, infrared imaging, Synthetic Aperture Radar, and hyperspectral imaging will require these very high data rate downlinks. SMDC works closely with the USA PEO Missiles and Space Transition Manager and leader for Space Initiatives who will be engaged with this effort beginning with Phase I SBIR activities.

Files

File Type Posted
A16-079.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors