HAAS Maintenance and Repair
Closed Pre-Solicitation Posted
- Solicitation number
- W911KF-26-S-0008
- Agency
-
ACC Warren
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Place of performance
- Alabama 36201, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Contracting Command Detroit Arsenal is seeking preventive maintenance and repair services for Haas Computer Numerical Controlled (CNC) machines located at Anniston Army Depot. This is a Request for Information (RFI) issued on April 2, 2026, with responses due by April 16, 2026, to gather market data and contractor capabilities rather than to solicit formal proposals. Interested contractors must submit capability statements including past performance examples, recommended contracting strategies, and responses to specific technical questions regarding hardware pricing accuracy, software and integration pricing, transition planning requirements, and any additional information necessary to support the Government's requirements. The RFI does not constitute a commitment to contract and does not obligate the Government to issue a future Request for Quote; however, any subsequent solicitation will be posted on beta.sam.gov, and potential offerors must monitor these sites for updates. The evaluation will focus on contractors' experience with similar CNC maintenance projects, their understanding of the technical requirements, and their ability to provide qualified personnel and responsive service.
This procurement carries no set-aside designation and is classified under NAICS 811310 (Commercial and Industrial Machinery and Equipment Repair and Maintenance) and PSC J034 (Maint/Repair/Rebuild of Equipment-Metalworking Machinery). The contract covers maintenance and repair services for 30 Haas machines across multiple models distributed throughout the depot, with services required during normal duty hours (0700 AM to 1530 PM Monday-Thursday, with alternating Fridays off) and emergency response within 48 hours of notification. Contractors must maintain a minimum of three certified technicians with facility access clearance and ensure annual preventive maintenance is completed within a consecutive six-week period during each 12-month calendar period, including mechanical checks, lubrication, coolant inspection, electrical verification, calibration, vibration analysis, and operator training. No specific award value or budget range is disclosed in the RFI, and the period of performance is listed as to be determined (TBD). The Government will provide coolant, oils, and lubricants; the contractor is responsible for all labor, materials, parts, equipment, hazardous waste disposal, and environmental compliance.
Notice text
REQUEST FOR INFORMATION
Anniston Army Depot
HAAS Maintenance and Repair
- Description
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and planning purposes and does not constitute a Request for Quote (RFQ) or a promise to issue an RFQ in the future. This request for information does not commit the Government to contract for any supply or service whatsoever. Further, the Army is not at this time seeking proposals and will not accept unsolicited proposals. Respondees are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFQ, if any is issued. If a solicitation is released, it will be synopsized in the same manner as this notice, at beta.sam.gov. It is the responsibility of the potential offerors to monitor these sites for additional information pertaining to this requirement.
- Background
This requirement is for the for preventive maintenance and repair of the following Haas Computer
Numerical Controlled (CNC) machines, located at Anniston Army Depot (ANAD). See Attachment 1 – Statement of Work. Period of Performance: TBD
3.0 Requested Information
3.1 Capability Statement, which includes any past performance examples of similar projects.
3.2 Recommended Contracting Strategy
3.3 Input/Responses on the following:
3.3.1 Are there enough details to assemble an accurate hardware price? If not, please identify shortcomings or other necessary information.
3.3.2 Are there enough details to assemble an accurate software and integration/installation price that will meet the Government’s requirement? If not, please identify shortcomings or other necessary information.
3.3.3 What additional information, if any, would be necessary to formulate a transition plan?
3.3.4 What sections, if any, require additional definition in order to properly specify your product?
3.3.5 Is the estimated Period of Performance time sufficient? If not, what would your firm propose?
3.3.6 Any additional questions/concerns/input your firm may have in regards to this Statement of Work (SOW).
4.0 Responses
4.1 Interested parties are requested to respond to this RFI via MS Word document by responding to the Point of Contact (POC) below.
4.2 Responses are due no later than 16 APR 26 AT 10 AM CST. Responses shall be limited to those items referenced in section 3.0 and 4.3 and shall be submitted via e-mail only to Reese Wells, christopher.r.wells36.civ@army.mil. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. To aid the Government, please segregate proprietary information. Please be advised that all submissions become Government property and will not be returned.
4.3. Responses shall provide administrative information, and shall include the following as a minimum:
4.3.1 Company Name, mailing address, and CAGE code.
4.3.2 Name, mailing address, phone number, and e-mail of designated point of contact.
4.3.3 Business type (large business, small business, small disadvantaged business, 8(a)-certified small disadvantaged business, HUBZone small business, woman-owned small business, very small business, veteran-owned small business, service-disabled veteran-owned small business) based upon North American Industry Classification System (NAICS) code 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, Size Standard $12.5 MIL
5.0 Industry Discussions
Anniston Army Depot representatives may or may not choose to meet with potential offerors. Such discussions would only be intended to get further clarification of potential capability to meet the requirements and any other items specified herein.
6.0 Questions
Questions regarding this announcement shall be submitted in writing by e-mail to christopher.r.wells36.civ@army.mil. Verbal questions or phone calls will NOT be accepted. Questions will be answered by posting responses to the beta.sam.gov website. Accordingly, questions shall NOT contain proprietary or classified information. The Government does not guarantee that questions received after 16 APR 26 will be answered.
7.0 Summary
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY to identify sources that can provide HAAS Maintenance and Repair. The information provided in the RFI is subject to change and is not binding on the Government. The Army has not made a commitment to procure any of the items discussed, and release of this RFI should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. All submissions become Government property and will not be returned.
Files
| File | Type | Posted |
|---|---|---|
| Statement of Work.docx | DOCX document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Preventative Maintenance and Repairs | ACC Warren | No set-aside | |
| HAAS Milling Machine Repair | Marine Corps | No set-aside | |
| AF36 PM and ER | ACC Warren | No set-aside | |
| Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services | ACC Aberdeen Proving Ground | Total Small Business | |
| Laser Cutting Machine Preventive Maintenance | ACC Redstone | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity