Glynco Perimeter Fence line Installation

The 165th Airlift Wing, 1401 Robert B Miller Drive, Garden City, GA requires the contractor to construct a new fence-line.  This new fence will be installed at the Glynco facility near Brunswick, GA at the 224th JCSS.  The fence length and dimensions are shown in the attached drawing(s) and are approximately 453 linear feet.  Contractor is to properly secure fence posts which will require coring to a proper depth to secure and provide proper spacing.  The contractor will provide an 8’ fence to include three strands of barbed wire; placement of barbed wire will face outward at 45 degree angle (see drawing details).  The contractor will need to perform coring operations in the concrete/asphalt to place the fence posts and then properly secure.  The fence will also need to be coated with a rubberized material for durability.  See drawing details.  The contractor is to construct two freely swinging, 12’ man-gates at placement on the drawings.  The contractor will properly secure each end of this fencing to an existing fence-line.  There are currently six (6) government owned concrete jersey barriers onsite which will need to be place as shown on the attached drawing.  The contractor is to provide approximately 500 linear feet of ¾ inch steel cable and secure this cable to the concrete jersey barriers and place per the drawing set.  The wire needs to be properly secured and to run the steel wire as shown.  The magnitude of this project is between $25,000 and $100,000. Construction/ Contract Completion time is 120 days after the issuance of the notice to proceed.  The North American Industry Classification System (NAICS) Code is 238990.  The small business size standard is $16.5 million average annual revenue for the previous three years. Site Visit information is posted in the attached
solicitation.  See attchments for drawings and Statement of Work