FY14 MCON P-907 MV-22 Parking Apron and Infrastructure and FY14 MCON P-908 MV-22 Hangar at the Marine Corps Base Hawaii, Kaneohe, Hawaii

09/18/2014 - Please submit personnel information for the site visit to norine.horikawa@navy.mil no later than October 07, 2014 at 10:00 a.m. HST. Site visit will be held on October 14, 2014 at 9:00 a.m. HST.

This is NOT a design build procurement. The work includes the following: Construct a hangar, apron and taxiway to support one MV-22 squadron. The work includes constructing one multi-story Type II modified aircraft maintenance hangar to provide a weather protected shelter for inspection, service and maintenance for the MV-22 aircraft. The hangar will include work center space for equipment and personnel and squadron administrative functions. The project also provides for a fire pump building and tank. Other primary and supporting facilities include aircraft taxiway, aircraft taxiway shoulders, Substation No. 3 feeder upgrade and utility infrastructure. The high bay aircraft maintenance hangar will be steel frame construction with a standing seam metal roof installed over a steel metal deck.

The hangars second floor administrative space will be steel framed with metal deck and concrete fill. The hangars floor slab shall be designed to support other transient and MCBH based aircraft and includes floor trenches to meet aqueous film forming foam (AFFF) requirements. Premium Information Systems include Naval Aviation Logistics Command Maintenance Information System (CAMEO/NALCOMIS) for the Aircraft Maintenance Hangar. Secure Internet Protocol Router Network (SIPRNET) included for the Aircraft Maintenance Hangar. This project will provide Anti-Terrorism/Force Protection (ATFP) features and will comply with ATFP regulations, physical security and progressive collapse mitigation in accordance with DoD Minimum Anti-Terrorism Standards for Buildings.

Built-in equipment includes one passenger/freight elevator, one 7.5 ton bridge crane with hoist, generator, and an aqueous film-forming foam (AFFF) fire-suppression system including foam retention tanks. Special construction features include piles. Site preparation includes site clearing, excavation and preparation for construction. Paving and site improvements include grading, parking, roadway from adjacent road to parking, curbs, sidewalks, landscaping, fencing, signs and storm-water drainage. Electrical utilities include primary and secondary distribution systems, lighting, transformers, and telecommunications infrastructure. The primary work includes a feeder upgrade to the substation to meet increased load.

Mechanical utilities include heating, ventilation and air conditioning, water lines, plumbing and plumbing fixtures, sanitary sewer lines, fire protection systems and supply lines. Sustainable design principles will be included in the design and construction of the project.



A one time pre proposal site visit is scheduled for 14 October 2014 at 9:00 a.m. HST. Please submit the names and Social Security Numbers of the attendees. Rapidgate passes will not be honored at MCBH. If you do not have a current MCBH base pass, please submit the name and SSN for each person wishing to attend. Please submit this information no later than 07 October 2014 at 10:00 a.m. HST.



Estimated range is from $50,000,000 to $100,000,000.

THE NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM (NAICS) CODE IS 236220 AND AVERAGE ANNUAL RECEIPTS IS $36.5 MILLION OVER THE PAST THREE YEARS. This procurement is UNRESTRICTED. This is a source selection procurement requiring both technical and price proposals. Contract award will be made to the offeror proposing the Lowest Priced Technically Acceptable (LPTA) proposal. The technical evaluation factors are anticipated to be as follows: Factor 1, Experience of the Firm on Recent Relevant Projects; Factor 2, Past Performance on Recent Relevant Projects; and Factor 3, Safety.



The Request for Proposal (RFP) will be available on or about 02 October 2014. The RFP, excluding the drawings, will be available through the NECO website https://www.neco.navy.mil.

The RFP, including the drawings can be accessed at the following direct link https://www.fbo.gov/fedteds/TDPN6274215R1301 after the RFP is issued. Printed copies or CDs of the RFP will not be issued. Contractors must register at the Federal Business Opportunities (FBO) website https://www.fbo.gov to obtain explicit access to the project. Registration instructions can be found on the FBO website. Once registered in FBO, the contractor must request explicit access to the project. An email will be forwarded once the contracting office has approved or declined the request. Approved contractors may view and/or download the project documents. Amendments will normally be posted to the web site https://www.neco.navy.mil.

If the amendment contains drawings, the amendment, excluding the drawings, will be posted to https://www.neco.navy.mil. If the amendment contains drawings, the drawings can be accessed at the following direct link https://www.fbo.gov/fedteds/TDPN6274215R1301. It is highly recommended that firms register on the NECO and on the FBO website as this will be the only available listing of plan holders. It is the responsibility of the offeror to check the NECO and FBO website periodically for any amendments or notices to the solicitation.