Fuel Nozzels

Added: Aug 28, 2017 8:07 am

NOZZLE,FUEL AND OIL SERVICING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

 RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

 RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

 SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

EXCEPTIONS TO DRAWING:
(1) RING - 7748809 IS INCORRECT DOCUMENT REFERENCE; CORRECT DOCUMENT
REFERENCE IS 7748805
(2) MS51847 IS CANCELED; USE MS14315
(3) MIL-STD-100 IS CANCELED; USE ASME-Y14.100, ASME-Y14.24,
ASME-Y14.35M, AND ASME-Y14.34M
(4) MIL-STD-105 IS CANCELED; USE MIL-STD-1916
(5) MIL-H-6615 IS CANCELED. USE MIL-DTL-6615

01/24/2014.  LATEST REV OF E150-1-12 LOADED.  FROM REV 'W' TO REV 'Y'.

NOTE:   DWG 10867297 Rev E lists  Cage Code 09310 for EMCO WHEATON which
is obsolete.   The correct Cage Code for EMCO WHEATON is of 3AJ00.

 "THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH
MUST CONFORM TO SOURCE CONTROL DRAWING. BY
SUBMITTING AN OFFER, THE OFFEROR AGREES TO
PROVIDE SOURCE CONTROLLED COMPONENTS FROM
SOURCES APPROVED ON THE APPLICABLE SOURCE
CONTROL DRAWING."

MIL-STD-130N, 16 Nov 2012
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING  *OPEN SOLICITATION ONLY*.
TO RECEIVE A COPY OF THE DRAWING(S),
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

 CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 10884808
REVISION NR H   DTD 05/19/2015
PART PIECE NUMBER: P/N 10884808

IAW REFERENCE DRAWING NR 19207 10867297
REVISION NR E   DTD 06/14/2011
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 18876 10379740
REVISION NR     DTD 06/17/1959
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10867292
REVISION NR B   DTD 09/06/1960
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 7748805
REVISION NR B   DTD 10/22/1996
PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-6615G(2)
REVISION NR 2   DTD 11/18/2014
PART PIECE NUMBER:

IAW REFERENCE SPEC NR MS14315D
REVISION NR D   DTD 11/01/2015
PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-1916 NOT 2
REVISION NR     DTD 06/05/2014
PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ASME Y14.34-2013
REVISION NR     DTD 01/01/2013
PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10884808
REVISION NR     DTD 02/06/2014
PART PIECE NUMBER: